Hampshire · England
Gutter Sealing in Totford
Gutter sealing in Totford from a team with over 20 years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Damp on an inside wall under a dripping gutter
- Leaking gutter joints and stop ends
- Dripping gutter ends
How we handle gutter sealing in Totford
Many dripping gutters are just a failed joint or end cap. We clean out the joint, dry it and reseal it with a sealant made for guttering. If the gutter itself has failed, we say so. We are often asked to deal with end caps that drip every time it rains and open joints in fascias and soffits, on soffit joints, gutter end caps and garage door frames.
Somewhere as small as Totford, homes and farm buildings often face open ground, so walls and rooflines take the full force of wind and rain. Joints on those walls need a sealant that moves with the building and stays in place.
There’s a 12-month guarantee on every job, large or small.
- Location
- Totford (SO24)
- Wider area
- Hampshire
- Guarantee
- One year on every job
- Quote
- Quoted before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Walls and rooflines in Totford
Compared with the north and west, the South East gets less rain, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day.
Letting a property close to Micheldever station? Then leaking gutter joints on a rental are best caught before they stain the walls. For an older house near a landmark such as Church of St John the Evangelist, old and new materials meet at the roofline and walls, which is where sealant earns its keep.
Totford is about 8 miles north-east of Winchester, in Hampshire. For gutter sealing in and around Totford, it’s easy to get a quote: please ring 0345 464 0079 or send us an email. We are based in Crawley and cover Hampshire. Our area takes in 683 places across Hampshire, from the larger towns to small villages. Our Southampton page covers work nearby.
Postcode districts we cover here for gutter sealing: SO24. Neighbouring places we cover for gutter sealing include Northington (1 mile south-west), Brown Candover (1 mile north-east), Old Alresford (3 miles south-east), Preston Candover (3 miles north-east) and Bighton (3 miles south-east). Further out, we also cover Basingstoke (10 miles north), Winchester (8 miles south-west), Eastleigh (14 miles south-west), Andover (14 miles west), Chandler's Ford (14 miles south-west) and Alton (9 miles east).
Local landmarks in Totford
Typical jobs here are in homes near The Woolpack Inn, among other places. Totford’s nearest station is Micheldever station, about 4.5 miles north-west of the centre. Well-known places in the area include Barton Castle (3 miles east).
Surface by surface
Soffit joints
Soffits sit under the eaves, where joints can open up. They’re sealed to tidy the line.
Garage door frames
Garage door frames let rain in when their sealant fails. We cut it out and reseal.
When something else is needed
In fairness, there are a few things sealant won’t fix:
- Water backing up from a blocked pipe
- Brackets that have snapped or loosened
- Cracked, split or warped gutter sections
Not sure which it is? You can ring 0345 464 0079 or email us and we’ll tell you honestly before you book.
Joints and surfaces we work on
- Gutter end caps
- Soffit joints
- Roofline trims
- Garage door frames
- uPVC fascias
- Gutter joints
How it works
There is not much for you to do on the day. Point us to the joints and we will get on with it. The work itself takes anything from an hour or two to a few hours from start to finish. For a village or hamlet like Totford, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- We look at the gutters, fascias and trims and agree the joints to seal.
- We clean out each joint.
- We make sure everything is dry.
- We apply exterior or gutter sealant and finish it neatly.
- The joints are checked once sealed.
Preparing for the visit
- Keep pets and children clear of the area while we work
- For indoor joints, keep the area dry beforehand if you can
- Let us know about stairs, lifts or work at height
Getting a quote
Need a quote? Please phone 0345 464 0079 or email us and tell us about the job. We’ll explain what we’d do and send you a clear quote before work begins.
Related advice
Should I try it myself first?
If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
The biggest DIY mistake is sealing over old sealant. Silicone doesn’t stick to old silicone, so it lifts and traps water and mould underneath. All the old material has to come out first.
What else we do in Totford
How to look after the new joints
How long the joints last depends on use and care. Here’s what we suggest:
- Don’t leave a sagging gutter
- Glance at the soffit joints now and then
- Look at the gutters while it’s raining
- Rest ladders on the wall, not the gutter
Keep the gutters clear of leaves and moss, so water drains away past the joints. Standing water strains every seal.
Once roofline sealant splits, water can get behind it. Sealing it early keeps the boards behind dry and the wall below.
What affects the quote in Totford
Call for a quick quote. The main things that affect it are:
- The type of sealant required
- How easy the joints are to reach
- The old material and how stubborn it is
- Working hours on commercial sites
What it costs depends on the size of the job, how much old material has to come out and how easy the joints are to reach. You’ll have a clear quote before any work starts.
Asking for a quote
To make quoting easier, please include:
- Whether it’s a home or a business
- Photos by email, if that is easy
- Any previous sealing or DIY work
- The problem you’ve noticed
Asking for a quote is easy: let us know the job and the location, and roughly how big it is. Photos by email help us understand the job, and we will come back to you with a quote.
Landlord and commercial work in Totford
For anyone letting property in or around Totford, several properties can go on one quote. Send us the addresses and the work at each.
Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Resealing at the right time is simple maintenance.
Questions from Totford
Do you work for landlords with property near Micheldever station?
Yes, we work for landlords and agents. You can phone 0345 464 0079 or send us an email with the address and a few details, and we’ll give you a fixed price before we start.
Do you cover smaller places like Totford?
Yes, we do. Our work covers London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
Does someone need to be in?
If the work is inside, we need someone to let us in. Once we have agreed the job, you do not need to watch us work.
Should I try DIY first?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. Most DIY failures come from sealing over old material, wet joints or too much sealant.
Is it OK to seal over old sealant?
No, it will not last. It may look fine at first, but the new bead soon lifts. Removing the old sealant completely is the only lasting way.
Will you leave a mess?
We keep the work tidy. Nearby surfaces are protected.
What information do you need?
Let us know what needs doing and where, with pictures by email if possible. If we need more, we will ask.
Can you reach high gutters?
It depends on the access. Tell us the height and what’s around the gutter and we’ll confirm what’s needed.