Hampshire · England
Remedial sealant & repairs in Totford, Hampshire
Remedial sealant for Totford and the surrounding area: careful preparation, the right product and tidy work. Ask us for a quick quote.
- Caulk or the wrong sealant used in a wet area
- Kitchen joints letting water behind the worktop
- Thick, messy sealant smeared over tiles
When it is not the sealant
It helps to know what we can’t do too:
- A tray or worktop that needs refixing first
- Water damage behind tiles that needs a tiler
- Old mastic in a building from before 2000 that should be checked for asbestos before it’s disturbed
If you are not sure, just phone 0345 464 0079 or drop us an email and we will give you a straight answer before booking.
Joints and surfaces we work on
- Expansion joints
- Botched or over-sealed joints
- Leaking tray & enclosure joints
- Mouldy bath & shower sealant
- Shrunken worktop sealant
- Failed movement joints
Remedial sealant in Totford
If a joint fails again and again, something is causing it. A tray that moves, a worktop that isn’t fixed, the wrong sealant or water getting in elsewhere will defeat even a perfect bead. Finding that cause comes before any new sealant. If you have sealant that came away because the surface wasn’t prepared and torn expansion joints, we can help.
Somewhere as small as Totford, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Older walls and timber floors can move a little, and cracked grout and split sealant are often the first signs.
Every job is covered by a one-year guarantee.
- Place
- Totford (SO24)
- Wider area
- Hampshire
- Guarantee
- One year on every job
- Quote
- A clear quote up front
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Signs you need remedial sealant in Totford
One of the commonest remedial jobs is sealant on top of sealant. Silicone does not bond to silicone, so the top layer lifts and water and mould collect between the two.
People normally contact us when they notice something like this:
- A shower that leaks however often it’s resealed
- Smears and lumps from a botched reseal
- Dark patches showing through the sealant
- Sealant peeling off a dusty or damp surface
Letting a property close to Micheldever station? Then a joint that keeps failing is best fixed properly while the property is empty.
What your quote should include
- How the joint is cleaned and prepared
- Which colour the sealant will be
- What the quote includes, VAT included or not
- Which sealant they’ll use, and why
Surface by surface
Over-sealed & botched joints
A botched joint can hide two or three layers of sealant, including the smears and film on surrounding tiles. New sealant needs a fully clean surface.
Worktops & kitchens
Shrunken worktop sealant leaves a gap that lets water into the back edge. We strip it, degrease the joint and reseal in a colour to suit.
Keeping the joints in good condition
Simple care keeps the joints in good condition. Our advice:
- Don’t point over movement joints
- Report a tray that rocks or a worktop that lifts
- Ask why a joint failed before redoing it
- Deal with small splits early
Keep an eye on the joint at first, particularly where the original failure was caused by movement. Should anything change, phone 0345 464 0079 or email us.
Do not keep resealing the same joint. Have someone find out why, or the next bead will go the same way.
DIY sealant or a professional job?
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, then guaranteed for a year.
If you are set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
How it works
Good joint work is mostly preparation, so that’s where we spend the time. Every joint is cleaned and dried before new material goes in. All told, the work takes a few hours, depending on how many layers have to come out. In a small place like Totford, access is generally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We start by checking the joint for movement, leaks and the reason it failed.
- All the old sealant comes out, including any layers underneath.
- The joint is cleaned, treated for mould and left to dry.
- Where the joint moves, backing and a flexible sealant suited to the movement go in.
- We tool the joint and tell you about anything else that needs attention.
Getting ready for the visit
- Tell us if parking is tricky
- Mention if the joints have been sealed before
- Mention any tricky access
How to get a quote
To get a quote, ring 0345 464 0079 or send us an email with the location and a short description of the problem. You’ll have a clear quote before any work starts.
Advice
Why it’s worth doing now in Totford
It’s easy to scratch acrylic, enamel or an uPVC frame cutting out old sealant, and any film left behind stops new sealant sticking. Careful removal is most of a remedial job. Older cottages and farmhouses around Totford can have timber floors and frames, and water through a failed joint can rot timber if it’s left.
The cost reflects the work involved, not a rough estimate. That is why we ask a few questions first and agree the price before starting.
Why book with us
- We leave the area clean and tidy
- A choice of colours where the product allows
- Full insurance on every job
- You choose the colour before work begins
Nearby places to Totford
Also in Totford
Questions from Totford
I let a flat near Micheldever station. Can you help?
Yes, we work for letting agents and landlords. You can phone 0345 464 0079 or drop us an email with the address and a few details, and we will give you a fixed price before we start.
Will you come out to Totford?
Yes. Totford is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Do you remove the old sealant?
Yes. All of the old material is cut out and the joint cleaned before applying anything new.
What information do you need?
Let us know what needs doing and where, with photos by email if possible. We’ll ask anything else we need to know.
Is there any odour?
Some sealants have a smell while they cure. Ventilation helps.
How long does the work take?
A little longer than a standard reseal. Most jobs take a few hours, and we confirm the time with your quote.
What if the leak is not the sealant?
In that case, we tell you what we have found. A plumber or fitter may be needed before any new sealant goes on.
Does someone need to be in?
We need access to the joints, so we’ll agree that with you when we book. Indoors, that generally means someone at home.
Remedial sealant in Totford: local notes
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Homes close to Church of St John the Evangelist include some older properties, and bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
Totford is about 8 miles north-east of Winchester, in Hampshire. Jobs in Totford get the same care as everywhere else we work: old sealant removed completely, careful preparation and a one-year guarantee. Totford is one of 683 places in Hampshire we cover. You can also see our page for Southampton, about 18 miles away.
Every address in SO24 is within our area for remedial sealant, from the main roads to the quietest streets. We also cover the places around Totford: Northington (1 mile south-west), Brown Candover (1 mile north-east), Old Alresford (3 miles south-east), Preston Candover (3 miles north-east) and Bighton (3 miles south-east). Larger places within reach include Basingstoke (10 miles north), Winchester (8 miles south-west), Eastleigh (14 miles south-west), Andover (14 miles west), Chandler's Ford (14 miles south-west) and Alton (9 miles east).
Around Totford
In Totford, that means homes and buildings near The Woolpack Inn, among other places. The closest station to Totford is Micheldever station, roughly 4.5 miles north-west. Well-known places in the area include Barton Castle (3 miles east).