Hampshire · England

Gutter, fascia & soffit sealing in Old Alresford, Hampshire

Gutter sealing for Old Alresford and the surrounding area: careful preparation, the right product and tidy work. Call for a quick quote.

  • Old gutter sealant that has let go
  • Stop ends leaking at the end of a run
  • Failed sealant on a garage door frame

Gutter sealing in Old Alresford

How we handle gutter sealing in Old Alresford

Sealant only bonds to a clean, dry joint. So the old sealant and grime come out first, then dry the joint before sealing. Common call-outs are for cracked sealant along roofline trims and damp patches inside below a leaking gutter, across uPVC fascias, soffit joints and gutter joints.

Somewhere as small as Old Alresford, homes and farm buildings often face open ground, where walls and rooflines take the weather head on. Gutter joints and wall joints there need a sealant that can flex and stay put.

Whatever the size of the job, you get the same 12-month guarantee.

Where
Old Alresford (SO24)
Region
Hampshire
Cover
12 months on all our work
Price
Quoted before any work starts
Call
0345 464 0079
Updated
26 October 2026
Applicator reaching up to seal an external door frame on a sunny day

Keeping the joints in good condition

Joint life depends on how it’s used and looked after. Here’s what we suggest:

  • Watch the wall under the gutters for staining
  • Keep ladders off the guttering
  • Clear leaves and moss from the gutters
  • Check fascia and soffit joints for gaps

Leave the new sealant to cure as we advise and avoid disturbing it.

Leaking gutter joints get worse over time. Water keeps hitting the same part of the wall and that can cause damp inside.

Honest limits

In fairness, there are a few things sealant won’t fix:

  • Roof leaks, slipped tiles or failed flashing (a roofer’s job)
  • Cracked, split or warped gutter sections
  • Sagging gutters or broken brackets

If you’re not sure, just call 0345 464 0079 or email us and we will give you a straight answer.

What we seal

  • Garage door frames
  • Gutter joints
  • uPVC fascias
  • Gutter end caps
  • Roofline trims
  • Soffit joints

What happens on the day

Once we’re on site, we check the joints match what you told us. If anything is different, we explain it before carrying on. After that, the work takes anything from an hour or two to a few hours. Somewhere like Old Alresford needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.

  1. First we agree which joints need sealing.
  2. We clean out each joint.
  3. We make sure everything is dry.
  4. The sealant is applied and finished.
  5. We check our work before we leave.

Before we arrive

  • Let us know if you’ve seen damp or leaks
  • Clear the area around the work
  • Keep children and pets away from the work area

Get a quote

If you’re in Old Alresford and need gutter sealing, phone 0345 464 0079 or drop us an email. Tell us what the problem is and where, and we will agree the price before any work begins.

Get a quick quote

Advice

Why deal with it now?

A new garage door isn’t needed for a leaking frame. Resealing the frame joint is often enough. Where a wall is exposed, as many are in small places like Old Alresford, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.

The cost depends on how much there is to do, how hard the old material is to remove and how easy the joints are to reach. We give a clear quote before work begins.

Why us?

  • A 12-month guarantee on all work
  • Over 20 years’ experience
  • ARBOMaster approved applicator
  • 180+ five-star Google reviews

See how sealant jobs are priced and our reviews.

Old Alresford questions

Can you do gutter sealing in Old Alresford?

Yes. Our work covers London and the South East, and Old Alresford is part of that. Just ring 0345 464 0079 or drop us an email with a few details of the job, and we will give you a clear price.

Is there a guarantee on gutter sealing in Old Alresford?

Every job comes with our 12-month guarantee, wherever it is. We are fully insured, and an ARBOMaster approved applicator.

When is the sealant fully cured?

It depends on the product and the temperature. We tell you how long to leave it before we go.

Can sealant stop a sagging gutter leaking?

No. A sagging gutter pulls its joints apart, so the brackets need fixing first.

Can you quote for more than one area?

Yes, and it often makes sense. Combining jobs makes good use of the visit, so mention them when you ask for a quote.

Should I try DIY first?

For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.

Do you offer different sealant colours?

We’ll suggest a colour to suit the surroundings. The choice depends on the product the joint needs.

Do you work for letting agents?

Yes, often. Several properties can go on one quote, and between tenancies is a good time for the work.

Landlord and commercial work in Old Alresford

For anyone letting property in or around Old Alresford, several properties can go on one quote. Just tell us the addresses and what each one needs, and photos by email help.

Hotels need rooms back in use, so we plan the work room by room. We have worked in hotels as well as homes and businesses.

Old Alresford buildings and the weather

Compared with the north and west, the South East gets less rain, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day. Historic houses like Hinton Ampner House (about 4.1 miles south) are a reminder that the area around Old Alresford has older buildings as well as new. Where a home is older, older brick and stone need a sealant that suits them, at the right joint depth.

For site and facilities teams at buildings such as Perins School, larger buildings have long runs of movement joint that eventually need resealing. Homes close to Church of St Mary include some older properties, and the joints between older walls, newer extensions and the roofline need a sealant that can move.

Old Alresford is about 7 miles north-east of Winchester, in Hampshire. Jobs in Old Alresford get the same care as everywhere else we work: old sealant removed completely, careful preparation and a one-year guarantee. Across Hampshire, we cover 683 places, and Old Alresford is one of them. For nearby work, see our Southampton page (16 miles or so).

Here we cover the SO24 postcode area for gutter sealing. We cover properties on Kiln Lane, Colden Lane and The Brook. Neighbouring places we cover for gutter sealing include Bighton (1 mile east), Northington (2 miles north-west), Totford (3 miles north-west), Brown Candover (3 miles north) and Upper Wield (4 miles north-east). Further out, we also cover Basingstoke (11 miles north), Winchester (7 miles south-west), Eastleigh (12 miles south-west), Horndean (15 miles south-east), Chandler's Ford (13 miles south-west) and Alton (9 miles east).

Around Old Alresford

We work in homes and buildings around The Globe Inn. Well-known places in the area include Barton Castle (3.1 miles north-east).

Map of Old Alresford © OpenStreetMap contributors

What affects the quote in Old Alresford

Jobs vary more than people expect. What affects the quote:

  • The size of the job
  • How much old sealant there is and how hard it is to remove
  • Whether there’s mould to deal with
  • Access and height

Every job is a little different, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all make a difference.

What to tell us for a quote

What to tell us when you ask for a quote:

  • Where the property is
  • If someone has resealed it before
  • The type of property
  • What the problem is, such as mould, gaps, leaks or cracking

Getting a quote is simple: let us know the job and the location and its rough size. Photos by email help us understand the job, and we will come back to you with a quote.

Different surfaces, different methods

uPVC fascias

We seal fascia joints, not replace the boards. Damaged boards need replacing by an installer.

Soffit joints

Gaps at soffit joints can let in draughts and insects. We close them with a suitable sealant.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job