Greater London · England
Soho Gutter Sealing
Gutter sealing for Soho, by sealant specialists with 20+ years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Old sealant on roofline trims that has split
- Old gutter sealant that has let go
- Water running down the wall below the gutter
Gutter sealing in Soho, done properly
We seal leaking gutter joints, end caps, fascia and soffit joints, along with roofline trims and garage door frames. It’s joint work, not replacing the gutter. Typical jobs include fascia boards with gaps between them and damp patches inside below a leaking gutter, on gutter joints, garage door frames and roofline trims.
Working on the outside of a London home means planning access: shared paths, upper floors and parking. In Soho, joints up high may need ladders or other access, which is worth talking through when you book.
We guarantee the work for a year. If there’s a problem with our work within the year, let us know and we’ll sort it.
- Place
- Soho (W1F, W1T, W1D)
- Wider area
- Greater London
- Guarantee
- A year, on every job
- Price
- Quoted before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Your questions about gutter sealing in Soho
Do you work for landlords with property near Tottenham Court Road station?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. Just phone 0345 464 0079 or send us an email with the address and what needs doing, and we will give you a clear price.
Is parking an issue for gutter sealing in Soho?
It can be, so it helps to tell us about permits, visitor bays or off-street space when you book. That way the visit can be planned around it.
What sealant do you use?
It depends on the joint: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. We use products from Arbo and Everbuild.
Do you do commercial work?
Yes. Hotels, offices and other businesses use us.
Can a leaking gutter joint be sealed?
Yes, as long as the gutter itself is in good order. The joint is cleaned and dried first so the sealant bonds.
Do you take out the old sealant first?
Yes. All of the old material is cut out and the joint cleaned before applying anything new.
Where do you work from?
Our base is Crawley, with over 20 years’ experience. Our area covers South East England, London and Scotland.
Are you fully insured?
Yes. Full insurance covers our work, and we can confirm the details when we quote.
When it is not the sealant
A few problems are outside what sealant work can do:
- Gutters that have dropped or pulled away
- Downpipes that are blocked or broken
- Boards that have decayed or split
Not sure which it is? You can call 0345 464 0079 or send us an email and we’ll tell you honestly before booking.
What we seal
- Gutter joints
- Gutter end caps
- Garage door frames
- Soffit joints
- Roofline trims
- uPVC fascias
How we quote for gutter sealing
There’s no set price list, because jobs vary so much. The quote depends on:
- The type of sealant required
- How many rooms, windows or areas are involved
- Access and height
- Mould in or behind the old joints
The cost reflects the work involved, not a rough estimate. That is why we ask a few questions first.
Asking for a quote
Photos help, but a description is a good start. Please mention:
- How many joints, rooms or windows are involved
- How we’d reach the joints
- Photos by email, if that is easy
- Where the job is, and your postcode
Want a quote for gutter sealing? Please call 0345 464 0079 or drop us an email and tell us about the job. You will know what we plan to do, and what it will cost, before any work begins.
How the job changes by surface
Gutter end caps
End caps take the pressure of water running along the gutter. A failed seal makes them leak.
Gutter joints
Most gutter leaks start at a joint between sections. We clean, dry and reseal them.
Work for landlords, hotels and businesses
If you manage several properties in or around Soho, jobs at different addresses can be quoted together. Send us the addresses and the work at each.
Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. We can quote for more than one property at once.
How to look after the new joints
Aftercare is simple:
- Check fascia and soffit joints for gaps
- Clean out the gutters once or twice a year
- Get leaks sealed before the wet months
- Make sure downpipes aren’t blocked
Make sure downpipes are not blocked, so water can get away. A blocked pipe backs water up to the joints.
A leaking stop end is best sealed before the wet months. Water down the wall all winter can cause damp inside.
Leave it or put it right?
You don’t need to replace a garage door because rain gets in round the frame. Resealing the frame joint is often enough. In older London homes, water behind a failed joint soaks into brick and timber without much sign, and by the time it shows on a wall or ceiling in Soho, the repair is bigger than the sealant job would have been.
Combining jobs into one visit is normally more efficient than separate visits. We’ll send you a clear quote for the lot.
Why Soho clients choose us
- We agree the colour with you first
- ARBOMaster approved applicator
- We leave the area clean and tidy
- One-year guarantee on every job
Take a look at our cost guide and our reviews.
What gutter sealing looks like in Soho
Compared with the north and west, the South East gets less rain, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day. Historic houses like Benjamin Franklin House (about 0.5 miles south-east) are a reminder that the area around Soho has older buildings as well as new. Where a home is older, older walls and rooflines need a sealant that moves with them and suits the material.
If you let a flat or house near Tottenham Court Road station, a dripping gutter joint or loose fascia trim is easy to miss until damp shows inside. If you look after a building such as Soho Parish CofE Primary School, its movement joints, gutters and trims need looking after like any other building’s. Soho is in London, so parking needs planning: tell us about permits, visitor bays or off-street space when you book.
Soho is about 1 mile east of City of Westminster, in Greater London. For gutter sealing in and around Soho, it’s easy to get a quote: please phone 0345 464 0079 or send us an email. We’re based in Crawley and cover Greater London. Across Greater London, we cover 764 places, and Soho is one of them.
Jobs for gutter sealing in W1F, W1T and W1D works the same way as everywhere else we cover. Whether your property is on Duck Lane, Drury Lane and Bridle Lane or anywhere close by, our applicators can take on the job. You’ll find Soho on the A4 and A301, so it’s easy for us to get to with everything needed for gutter sealing. If you are just outside Soho, we cover West End (1 mile east), Chinatown (1 mile south), Seven Dials (1 mile east), St Giles (1 mile north-east) and St James's (1 mile south). Larger places within reach include Kensington (3 miles west), Walthamstow (7 miles north-east), Whitechapel (3 miles east), Hampstead (3 miles north-west), Ruislip (13 miles west) and Stockwell (3 miles south).
Local landmarks in Soho
Locally, jobs take us to homes and businesses close to Bar Soho, St Anne's Churchyard and Harris Westminster Sixth Form. Other local landmarks include LITE Regal International School (0.6 miles west) and London Library (0.5 miles south-west). Soho has its own railway station: Tottenham Court Road station. Nearby you’ll also find Kingly Court (under half a mile west) and Montfichet's Tower (1.3 miles east). The countryside around Soho includes St. James's Park Lake and Ludgate Hill.
How it works
Before we leave, we go over the finished joints with you. The visit itself normally takes anything from an hour or two to a few hours, depending on the size of the job. For a job in Soho, parking and access are the things to plan: tell us about permits, visitor bays or off-street space, which floor we are working on and whether there’s a lift.
- We look at the gutters, fascias and trims and agree the joints to seal.
- Each joint is cleaned and any old sealant removed.
- The joints are dried.
- We apply exterior or gutter sealant and finish it neatly.
- We check our work before we leave.
Preparing for the visit
- Clear the area around the work
- Where the joints are inside, avoid wetting them before we arrive
- Let us know if you’ve seen damp or leaks
Getting a quote
Getting a quote is simple: let us know the job and the location. Photos by email help us understand the job.