Surrey · England

Gutter, fascia & soffit sealing in Reigate, Surrey

Sealing leaking gutter joints, end caps, fascias, soffits and roofline trims for householders, landlords and businesses in Reigate. Fully insured, ARBOMaster approved and guaranteed for a year.

  • Stop ends leaking at the end of a run
  • Rain getting in around a garage door
  • Trim joints where the sealant has failed

Book gutter sealing in Reigate

Gutter sealing in Reigate, done properly

For gutter sealant to hold, the joint has to be clean and dry. So the old sealant and grime come out first, then dry the joint before sealing. We work on uPVC fascias, roofline trims and soffit joints, and people most often call us about streaks down the brickwork from a leaking joint and open joints in fascias and soffits.

Extensions are a common sight on houses around Reigate, and the line where an extension meets the original house is a common leak point. Getting the joint depth right matters as much as the sealant itself.

We guarantee the work for a year. If something is not right with it in that time, tell us and we will put it right.

Mr Mastic applicator sealing the top of a white uPVC door frame on a red-brick house
Place
Reigate (RH2, RH1)
Wider area
Surrey
Cover
12 months on all our work
Quotes
Quoted before any work starts
Phone
0345 464 0079
Last updated
26 October 2026

Your questions about gutter sealing in Reigate

Can you help a landlord with a rental near Reigate station?

Yes, landlords and agents are among the people we work for. Just ring 0345 464 0079 or drop us an email with the address and what needs doing, and we’ll send you a clear quote.

Can you do gutter sealing in Reigate?

Yes, Reigate is within the area we cover. Our work covers London and the South East. You can phone 0345 464 0079 or drop us an email and tell us what needs doing, and we’ll give you a clear price.

Do I have to be there?

If the work is inside, we need someone to let us in. Once we’ve agreed the job, you don’t need to watch us work.

Do you install new fascias or gutters?

Replacement is not our trade. If a gutter is broken or sagging, we’ll tell you so you can call the right trade.

Do you take out the old sealant first?

Yes. All of the old material is cut out and the joint cleaned before applying anything new.

Is it possible to stop a gutter joint dripping with sealant?

Generally, if the gutter is sound. The joint is cleaned and dried first so the sealant bonds.

Where do you work from?

We work from Crawley. We cover Reigate and the rest of Surrey.

Is sealant enough for a gutter that has dropped?

Sealant will not hold a sagging gutter. The gutter needs refixing by a gutter installer.

Quotes for gutter sealing in Reigate

You’ll get a clear quote before any work starts. It takes into account:

  • The number and length of the joints
  • The product the joint needs
  • How much old sealant there is and how hard it is to remove
  • When we can work, for business premises

What you pay reflects the work, not guesswork. That’s why we ask about the job first and agree the price before starting.

What to tell us for a quote

Before you ask for a quote, have a think about:

  • Whether it has been sealed before
  • Where the property is
  • Whether it’s a home or a business
  • Roughly how big the job is

Call for a quick quote, or email us if that is easier. Describe what needs sealing and we will talk you through the work and send you a clear quote.

For landlords and businesses

From a single let to a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.

Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.

Leave it or put it right?

A new garage door is not needed for a leaking frame. Resealing the frame joint is often enough, if the frame itself is sound. In Reigate, as anywhere, most leaks start as a small gap in a joint, and they’re far easier to fix early.

The cost depends on the size of the job, how hard the old material is to remove and access to the work. You’ll have a clear quote before any work starts, so you know where you stand.

What you get with us

  • Domestic, commercial and hotel work
  • More than 20 years in sealant work
  • An ARBOMaster approved applicator
  • Every job guaranteed for a year

Read our cost guide or our reviews.

What the job involves on each surface

uPVC fascias

Fascia board joints can open up. We seal them neatly in a suitable colour.

Garage door frames

A fresh seal around the frame stops rain getting in.

When it isn’t the sealant

We’ll always be straight with you, so here’s what sealant cannot fix:

  • Blocked downpipes
  • Guttering that needs replacing
  • Boards that have decayed or split

If in doubt, call 0345 464 0079 or email us and we will say what we think.

What we seal

  • uPVC fascias
  • Gutter joints
  • Roofline trims
  • Soffit joints
  • Garage door frames
  • Gutter end caps

Signs you need gutter sealing in Reigate

Stop ends take pressure from water running along the gutter. Once the seal behind them fails, they drip.

If you can see any of these, it’s time to have the joints looked at:

  • Open joints in fascias and soffits
  • Leaking gutter joints and stop ends
  • Old gutter sealant that has let go
  • Failed sealant on a garage door frame

Rented homes near Reigate station change hands often, and a dripping gutter joint or loose fascia trim is easy to miss until damp shows inside.

Before booking anyone

  • What happens if they find a problem under the old sealant
  • Who does the work, and how experienced they are
  • How the colour is chosen
  • How long to leave it before use

10 questions to ask before booking

What gutter sealing looks like in Reigate

The South East is one of the drier parts of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.

If you live in an older home near Church of St Mary Magdalene, an extension built onto an older house moves differently, and the joint between them takes the strain. If you look after a building such as Reigate Priory Community Junior School, movement joints, cladding joints and gutters on larger buildings need the same care as a house’s.

Reigate is about 9 miles north of Crawley, in Surrey. Jobs in Reigate get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. We cover 395 towns and villages across Surrey, large and small. Crawley is on our list too, about 9 miles from Reigate.

We work across RH2 and RH1 for gutter sealing. Local streets include High Street, London Road and Church Road, all of which we cover. Being close to the A25 and A217, Reigate is simple for us to get to for gutter sealing. Other places close to Reigate include South Park (1 mile south), Margery (2 miles north), Mogador (2 miles north-west), Sidlow (2 miles south) and Irons Bottom (2 miles south). Larger places within reach include Epsom (7 miles north-west), Horley (4 miles south), Ewell (8 miles north), Walton-on-Thames (14 miles north-west), Caterham (6 miles north-east) and Dorking (6 miles west). As one of the bigger places in Surrey, Reigate has every kind of property, from flats to offices.

Near you in Reigate

Locally, jobs take us to homes and businesses close to The Bell Public House, Castle Grounds and Reigate College and the streets around them. Reigate has its own railway station: Reigate station. Well-known places in the area include The Belfry (1.4 miles east) and Reigate Castle (within half a mile north-west). Open spaces near Reigate include Reigate Heath and Mercers Lake.

Map of Reigate © OpenStreetMap contributors

The process

Before we leave, we go over the finished joints with you and tell you how long to leave it. The work normally takes an hour or two for a few joints, longer for a full run, depending on the size of the job. Parking in a town like Reigate is generally straightforward, but tell us if there’s a driveway or any restrictions, and let us know if the work is upstairs, in a flat or up high outside.

  1. First, we find the drip and check the gutter is not cracked or sagging.
  2. Old sealant and dirt are removed from the joint.
  3. The joint is dried, because sealant will not bond to a wet surface.
  4. Gutter or exterior sealant is applied and finished.
  5. The run is checked and any debris near the joints is cleared.

Getting ready for the visit

  • Tell us about any water getting in
  • Move anything stored near the joints
  • For indoor joints, keep the area dry beforehand if you can

Ask for a quote

Every job is quoted individually, so start by telling us what you need. Just phone 0345 464 0079 or email us with the details, and photos are welcome.

Get a price

Advice

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job