Southampton · England

Gutter, fascia & soffit sealing in Regents Park, Southampton

Gutter sealing for Regents Park, by sealant specialists with 20+ years’ experience. Rated 4.9 on Google from 180+ five-star reviews.

  • Gaps along fascia and soffit joints
  • Quick sealant fixes on gutters that didn’t last
  • Water dripping where gutter sections meet

Gutter sealing near Regents Park

Regents Park questions

Will you come out to Regents Park?

Yes. Regents Park is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.

Does the coastal weather in Regents Park affect outside sealant?

Near the coast, wind-driven rain and, nearer the shore, salt air make outside sealant work harder. Choosing the right sealant for the frame and wall, laid at the right depth, helps it last.

Can I do it myself?

For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. Most DIY failures come from sealing over old material, wet joints or too much sealant.

Is there any odour?

It depends on the product. Some smell for a while, some hardly at all, and any smell fades as they cure.

Do you guarantee gutter sealing?

You get our 12-month guarantee to all our work.

Do you clean gutters?

The joints we seal are cleaned out and clear debris we find nearby. A full gutter clean is a separate service.

How much does gutter sealing cost in Regents Park?

It depends on the job, so we quote each one individually. To get one, call 0345 464 0079 or email us and tell us what needs doing and where.

What sealant do you use?

It depends on the joint: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. Brands we use include Arbo and Everbuild.

Gutter sealing in Regents Park, done properly

We do not replace gutters, fascias or roofs. What sealant does is close joints; it won’t fix a broken bracket, a cracked section or a blocked downpipe. We work on gutter end caps, garage door frames and gutter joints, and people most often call us about wet patches on the wall under a gutter joint and leaking gutter joints and stop ends.

Houses in smaller places like Regents Park can stand more in the open than those in a built-up town, so exposed walls and rooflines take more wind-driven rain. That’s where gutter joints and wall joints tend to fail first.

Whatever the size of the job, you get the same one-year guarantee.

Where
Regents Park (SO15, SO16, SO17)
Wider area
Southampton
Cover
One year on every job
Quote
A clear quote up front
Telephone
0345 464 0079
Page updated
26 October 2026
Applicator reaching up to seal an external door frame on a sunny day

Do you need gutter sealing in Regents Park?

Overflowing gutters can look like leaking joints. A blocked downpipe makes water back up, which is why we look before we seal.

Most people get in touch after spotting something like this:

  • Failed sealant on a garage door frame
  • End caps that drip every time it rains
  • Old gutter sealant that has let go
  • Leaking gutter joints and stop ends

If you let a flat or house near Millbrook (Hants) station, a gutter joint that drips onto the wall can turn into a damp complaint, so it’s worth checking.

What your quote should include

  • What preparation is included
  • When the joint can take water or movement
  • Is VAT in the price?
  • How much experience the applicator has

Our hiring checklist

What gutter sealing looks like in Regents Park

Regents Park is within about 1 mile of the coast, where wind-driven rain is a fact of life and, nearer the shore, so is salt air. That is hard on gutter, fascia and roofline joints, especially on the side facing the sea. The South East is one of the drier parts of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.

If you look after a building such as Regents Park Community College, movement joints, cladding joints and gutters on larger buildings need the same care as a house’s. In the older streets around Church of the Holy Trinity, the joints between older walls, newer extensions and the roofline need a sealant that can move.

Regents Park is about 2 miles west of Southampton, in Southampton. Every kind of property in Regents Park is covered for gutter sealing. Every job comes with our 12-month guarantee. Our area takes in 40 places across Southampton, from the larger towns to small villages.

Here we cover the SO15, SO16 and SO17 postcode area for gutter sealing. We cover properties on May Road, Mill Road and York Road and the roads around them. Regents Park sits on or near the A33 and A3057, which makes travel easy. Other places close to Regents Park include Shirley (1 mile east), Millbrook (1 mile south-west), Freemantle (1 mile south-east), Maybush (1 mile north-west) and Coxford (1 mile north). Larger places within reach include Townhill Park (4 miles east), Midanbury (3 miles east), Thornhill (4 miles east), Chartwell Green (4 miles east), Harefield (4 miles east) and Itchen (3 miles east). As one of the bigger places in Southampton, Regents Park has every kind of property, from flats to offices.

Landmarks near Regents Park

Around Regents Park, our work takes us to homes and buildings near Foundry Lane Primary School, St James' Park and Millbrook Community School. For rail, the closest station is Millbrook (Hants) station, roughly 0.6 miles south-east of the centre. Nearby you will also find Marlands Shopping Centre (1.8 miles south-east) and Netley Castle (4.6 miles south-east). For a walk, there’s Testwood Lakes.

Map of Regents Park © OpenStreetMap contributors

What we do, step by step

Most of a good job is in the preparation, and we do not rush it. Every joint is cleaned and dried before new material goes in. All told, the work takes anything from an hour or two to a few hours. In a smaller place like Regents Park, parking is seldom the issue; lanes, gates and long drives are worth mentioning. If the job is outside, tell us about side access and how high the joints are.

  1. First, we find the drip and check the gutter isn’t cracked or sagging.
  2. We clean out the joint and take out the old sealant.
  3. The area is dried so the sealant can bond.
  4. We seal the joint with a sealant made for gutters and outdoor use.
  5. We check the run and clear any debris we find while we are there.

How to prepare

  • Let us know about earlier repairs to the joints
  • Move anything stored near the joints
  • On commercial sites, let us know about site rules

Get a quote

A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is, and add photos by email if you can.

Get a price

Read more

Landlord and commercial work in Regents Park

Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements and we’ll give you a quote.

Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Resealing at the right time is simple maintenance.

Aftercare tips

How long the joints last depends on use and care. We suggest:

  • Keep the gutters clear of debris
  • Check the gutters during heavy rain
  • Look along the fascias for open joints
  • Keep ladders off the guttering

Have a look at the gutter during a downpour. Drips are easiest to spot while it’s raining.

Early sealing limits how much water hits the wall. If we find a bigger problem, we’ll tell you.

Different surfaces, different methods

Gutter joints

Joints between gutter lengths are the most common leak point. We clean, dry and reseal them.

uPVC fascias

Open fascia joints look untidy and can let water in. Sealing them closes the gap.

DIY sealant or a professional job?

What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is.

The biggest DIY mistake is sealing over old sealant. New silicone won’t bond to old, so it lifts and traps water and mould underneath. Everything old must be removed first.

What affects the cost of gutter sealing

The price is agreed before any work begins. It’s based on:

  • The number and length of the joints
  • Any working-time requirements on site
  • Any mould that needs treating
  • Whether old sealant or filler has to be cut out

Doing several joints on one visit is generally more efficient than separate visits, so it’s worth mentioning everything you’d like done. You will get one clear quote for the whole job.

What we need to know

Photos help, but a description is a good start. Try to tell us:

  • The rough size of the job
  • The type of property
  • Where the job is, and your postcode
  • Any access issues, like height or stairs

For a quote, call 0345 464 0079 or drop us an email with the location and a short description of the problem. We’ll give you a clear price before any work starts.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job