Moray · Scotland
Gutter Sealing in Portgordon
Gutter sealing in Portgordon from a team with over 20 years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Wet patches on the wall under a gutter joint
- Water dripping where gutter sections meet
- End caps that drip every time it rains
How we handle gutter sealing in Portgordon
Failed sealant round a garage door frame lets rain blow in. We cut out the old sealant and reseal the frame with an exterior sealant. Typical jobs include damp patches inside below a leaking gutter and garage door frames letting rain in, across roofline trims, gutter joints and soffit joints.
Stone walls need a stone-friendly sealant, as acetoxy products can attack some stone. On newer homes, the movement joints and roofline trims are what need watching.
You are covered for a year from the day we finish. If there’s a problem with it, please drop us a line at info@mrmastic.co.uk.
- Place
- Portgordon (AB56)
- Wider area
- Moray
- Guarantee
- A year, on every job
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Portgordon: your questions answered
Is Portgordon within the area you cover?
Yes, we do. We work across all of Scotland, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Is Portgordon in your area for gutter sealing?
Yes. We work across all of Scotland, and Portgordon is part of that. Just drop us a line at info@mrmastic.co.uk with a few details of the job.
Can I add another job to the visit?
Yes, and it often makes sense. Doing several areas at once is usually more efficient.
How much does gutter sealing cost in Portgordon?
Size, access and the old material all affect the cost. Call for a quick quote and we will talk you through it.
Can tenants book the work?
Yes, though it’s best to check with your landlord first. Landlords are often happy for the work to be arranged.
Can sealant stop a sagging gutter leaking?
Not on its own. A sagging gutter pulls its joints apart so it needs refixing before sealing.
Is it OK to seal over old sealant?
No, and we never do. It may look fine at first, but the new bead soon lifts. Removing the old sealant completely is the only lasting way.
Should I try DIY first?
It depends on the job. High-level, external movement and fire-rated joints are professional jobs, while a short indoor joint may be within reach.
What happens on the day
At the end, we look at the finished work together and explain the cure time. The work normally takes a few hours, depending on the number of joints and the access, depending on how much there is to do. Outside jobs in Portgordon need a dry day, because sealant won’t bond to a wet joint, so an outdoor job can move if the forecast changes. Indoor work goes ahead whatever the weather.
- We find where the water is coming from and check the gutter is sound.
- We remove the old sealant and clean the joint.
- We dry the joint so the new sealant can bond.
- We seal the joint with a sealant made for gutters.
- We check the run and clear debris near the joints.
Getting ready for the visit
- For indoor joints, keep the area dry beforehand if you can
- Move anything stored near the joints
- On commercial sites, let us know about site rules
Getting a quote
To get a quote, email us at info@mrmastic.co.uk and tell us where the job is and what the problem looks like. We’ll give you a clear price before any work starts.
Related advice
Towns and villages near Portgordon
More services for Portgordon
Different surfaces, different methods
Gutter joints
When a joint drips, the gutter is often still sound. Sealing the joint often stops it.
uPVC fascias
Open fascia joints look untidy and can let water in. A neat bead closes them up.
Common problems we fix in Portgordon
Sagging sections pull joints apart. Resealing a sagging joint will not last so the brackets need attention first.
The most common problems we see are:
- Quick sealant fixes on gutters that didn’t last
- Streaks down the brickwork from a leaking joint
- Dripping gutter ends
- Cracked sealant along roofline trims
Managing a site like Buckie High School? Then movement joints, cladding joints and gutters on larger buildings need the same care as a house’s.
Comparing quotes
- What the quote includes, VAT included or not
- How long the guarantee is
- Whether they’re fully insured
- When the joint can take water or movement
Landlord and commercial work in Portgordon
In hotels, rooms out of use cost money, so the work can be planned room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.
Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance.
What happens if it’s left?
Water from a leaking joint hits the same spot every time. Over time that can stain brickwork, mark render and encourage damp, so it’s worth sealing early. In a place like Portgordon, small leaks are easy to put off, but water behind a failed seal does the most damage when nobody’s watching.
Leaving a failed joint usually makes the job bigger, not smaller, as water and mould keep getting in. If you are not sure whether it needs doing, drop us a line at info@mrmastic.co.uk and we will give you an honest view and a quote.
Why us?
- We never seal over old sealant
- Anti-fungal silicone where joints get wet
- 20+ years of sealant experience
- Experience in homes, commercial sites and hotels
Portgordon buildings and the weather
Portgordon is close to the coast, where wind-driven rain is a fact of life and, nearer the shore, so is salt air. That’s hard on gutter, fascia and roofline joints, especially on the side facing the sea. Under the Repairing Standard, private landlords in Scotland have to keep homes wind and watertight, and sound outside sealant is part of that.
In and around Portgordon, as anywhere, good gutter sealing starts with a clean, dry, properly prepared joint.
Portgordon is about 2 miles south-west of Buckie, in Moray. If you need gutter sealing in Portgordon, please email us at info@mrmastic.co.uk for a quick quote. We cover Moray from our Crawley base. Our area takes in 58 places across Moray. Aberdeen is on our list too, around 48 miles away.
Our applicators cover all of the AB56 postcode area for gutter sealing. We cover properties on Station Road, Richmond Terrace and Crown Terrace and the roads around them. We also cover the places around Portgordon: Arradoul (1 mile east), Buckie (2 miles north-east), Upper Dallachy (2 miles south-west), Nether Dallachy (2 miles west) and Bogmoor (2 miles west). Larger places within reach include Elgin (11 miles west), Lossiemouth (11 miles west), Keith (9 miles south), Ashgrove (11 miles west), Portknockie (6 miles north-east) and Cullen (8 miles east). Island and remote addresses take a little more planning, so tell us where you are when you ask for a quote.
Near you in Portgordon
Other landmarks nearby include Gordon Castle (3.9 miles south-west) and Seafield Hospital (1.4 miles east). Green spaces nearby include The Lake.
DIY sealant or a professional job?
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
What affects the cost of gutter sealing
Every job gets its own quote. These are the things that affect it:
- Which sealant suits the joint
- Any working-time requirements on site
- The number and length of the joints
- How many rooms, windows or areas are involved
Doing several joints on one visit is usually more efficient than separate visits. You’ll get one clear quote for the whole job.
What we need to know
Before you ask for a quote, have a think about:
- A few pictures by email, if you can
- If it’s domestic, commercial or a hotel
- What’s wrong with the joints now
- The address or postcode of the job
Asking for a quote is easy: let us know the job and the location, and roughly how big it is. Photos by email help us understand the job, and we will come back to you with a quote.