Hampshire · England
Kitwood Gutter Sealing
Gutter and fascia joints in Kitwood need attention? We remove the old material, prepare the joints and seal them properly, and the work is guaranteed for a year.
- Leaking gutter joints and stop ends
- Stop ends leaking at the end of a run
- Quick sealant fixes on gutters that didn’t last
Gutter sealing for homes and businesses in Kitwood
Failed sealant round a garage door frame lets rain blow in. The frame joint is cut out and resealed using a sealant made for outdoor use. We work on uPVC fascias, gutter joints and roofline trims, and people most often call us about water dripping where gutter sections meet and cracked sealant along roofline trims.
Older homes in small places like Kitwood may be stone, brick or timber-framed, often with later extensions. Where one material meets another is where water normally gets in.
Your job is guaranteed for a year, as with all our work.
- Place
- Kitwood (SO24)
- Wider area
- Hampshire
- Cover
- One year on every job
- Price
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Why act early in Kitwood
You do not need to replace a garage door because rain gets in round the frame. Resealing the frame joint is often enough, if the frame itself is sound. In a small place like Kitwood, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.
Homes and businesses are quoted the same way: how much there is to do, how we reach it and what it needs, along with when we can work on site. Ask us for a quote and we will go through it with you.
What you get with us
- Homes, businesses and hotels
- Approved under the ARBOMaster scheme
- Sanitary silicone with an anti-fungal additive in wet areas
- More than 20 years in sealant work
When it is not the sealant
New sealant can’t fix everything, and we’d rather say so up front. It won’t solve:
- Fascias that need replacing
- Downpipes that are blocked or broken
- Problems with the roof covering
Not sure which it is? You can phone 0345 464 0079 or send us an email and we will tell you honestly.
Joints and surfaces we work on
- Roofline trims
- Garage door frames
- Gutter end caps
- Gutter joints
- Soffit joints
- uPVC fascias
How to look after the new joints
Once the sealant has cured, a few habits help it last:
- Have sagging gutters refixed early
- Clean out the gutters once or twice a year
- Watch for drips in a downpour
- Get leaks sealed before the wet months
Give the sealant the cure time we tell you before poking or cleaning near it.
If an end cap is dripping, deal with it before winter. A winter of drips can lead to damp patches.
Quotes for gutter sealing in Kitwood
Some jobs are bigger than they look, and some smaller. The main factors:
- Mould in or behind the old joints
- The size of the job
- How many areas need sealing
- When we can work, for business premises
What you pay reflects the work, not guesswork. That is why we ask a few questions first and agree the price before starting.
Helping us quote
When you contact us, it’s useful to know:
- Photos by email, if that’s easy
- Any previous sealing or DIY work
- What’s wrong with the joints now
- Any access issues, like height or stairs
For a quote, phone 0345 464 0079 or drop us an email and tell us where the job is and what the problem looks like. You’ll have a clear quote before any work starts.
Kitwood buildings and the weather
With historic houses such as Bentworth Hall (about 3.8 miles north) nearby, there’s older building stock in the area around Kitwood as well as newer homes. Where a home is older, older brick and stone need a sealant that suits them, at the right joint depth. The South East is one of the drier parts of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.
Managing a site like Four Marks Church of England Primary School? Then larger buildings have long runs of movement joint that eventually need resealing. In the older streets around Church of the Good Shepherd, an extension built onto an older house moves differently, and the joint between them takes the strain.
Kitwood is about 5 miles south-west of Alton, in Hampshire. For gutter sealing in and around Kitwood, it’s easy to get a quote: please call 0345 464 0079 or send us an email. We’re based in Crawley and cover Hampshire. Across Hampshire, we cover 683 places, Kitwood among them. Southampton is on our list too, about 19 miles from Kitwood.
All of SO24 is covered for gutter sealing. We also cover the places around Kitwood: Gilbert Street (1 mile south-west), Charlwood (1 mile south-east), North Street (1 mile west), Monkwood (2 miles south) and Ropley (2 miles south-west). Within a short drive, we also cover Basingstoke (12 miles north), Winchester (12 miles west), Fleet (15 miles north-east), Horndean (13 miles south), Alton (5 miles north-east) and Waterlooville (14 miles south).
Near you in Kitwood
Well-known places in the area include Alton Community Hospital (4.1 miles north-east) and Barton Castle (4.3 miles north-west). Not far away are Shutts Copse and Red Hill.
DIY versus a professional finish
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
FAQs for Kitwood
Is Kitwood in your area for gutter sealing?
Yes. We work across London and the South East, and Kitwood is part of that. Just call 0345 464 0079 or send us an email with a few details of the job, and we’ll send you a clear quote.
What guarantee comes with gutter sealing in Kitwood?
Every job comes with our 12-month guarantee, wherever it is. We’re fully insured, and an ARBOMaster approved applicator.
Do you work for hotels and businesses?
Yes. We have worked for hotels, offices and other businesses and we’re fully insured.
Where do you work from?
Our base is in Crawley, and we work across South East England, London and Scotland.
What information do you need?
A short description and the location, plus photos if you have them. If we need more, we will ask.
Can you seal fascia and soffit joints?
Yes, it’s a common job. The gaps are cleaned and sealed neatly.
Will it make a mess?
No. We work neatly, protect the area around the joints and tidy up afterwards.
Can sealant stop a sagging gutter leaking?
It won’t last. The movement opens the joint again, so the fall and brackets need sorting first.
How the visit works
Good joint work is mostly preparation, and we don’t rush it. Every joint is cleaned and dried before new material goes in. In total, it normally takes an hour or two for a few joints, longer for a full run. For a village or hamlet like Kitwood, the journey is planned in advance: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- We look at the gutters, fascias and trims and agree the joints to seal.
- Each joint is cleaned and any old sealant removed.
- The joints are dried.
- We apply exterior or gutter sealant and finish it neatly.
- We check our work before we leave.
Before we arrive
- Mention any sign-in or site rules at work premises
- Tell us if parking is tricky
- Keep children and pets away from the work area
Getting a quote
Asking for a quote is easy: let us know what needs doing and where and its rough size. Photos by email help us understand the job, and we will come back to you with a quote.
Read more
Nearby places to Kitwood
More services for Kitwood
How the job changes by surface
Garage door frames
Resealing a garage door frame keeps rain and draughts out.
Roofline trims
Trims along the roofline are often finished with sealant. When it splits, water can get behind.