Perth and Kinross · Scotland
Gutter, fascia & soffit sealing in Gilmerton, Perth and Kinross
Sealing leaking gutter joints, end caps, fascias, soffits and roofline trims for Gilmerton, backed by a 12-month guarantee. Call for a quick quote.
- Dripping gutter ends
- Internal damp traced to a gutter joint
- Failed sealant on a garage door frame
Your questions about gutter sealing in Gilmerton
Is there a guarantee on gutter sealing in Gilmerton?
Every job comes with our 12-month guarantee, wherever it is. We are also fully insured and ARBOMaster approved.
Is Gilmerton within the area you cover?
Yes, smaller places are covered as well as towns. We work across all of Scotland. Let us know about access, parking and anything unusual about getting there when you book.
Do you seal gaps in fascias and soffits?
Yes. Open joints along uPVC fascias and soffits can be sealed in a colour to suit.
Is sealant enough for a gutter that has dropped?
Sealing a sagging joint won’t last. The gutter needs refixing by a gutter installer, and we’ll tell you if that’s what we find.
How long does gutter sealing take?
As a guide, most jobs take a few hours, depending on the number of joints and the access. Larger jobs naturally take longer.
Can you quote for more than one area?
Yes. Several rooms, windows or areas can go on one quote.
Do you work for landlords and businesses?
Yes, regularly. We can quote for several properties at once.
Do I have to be there?
If the work is inside, we need someone to let us in. After that, you can carry on with your day.
How we handle gutter sealing in Gilmerton
Water dripping from a gutter joint can stain walls and soak the ground below. Often a reseal is enough if the gutter is not damaged. Common call-outs are for streaks down the brickwork from a leaking joint and internal damp traced to a gutter joint, across uPVC fascias, roofline trims and soffit joints.
Across smaller places in Scotland, stone and harled cottages, farm buildings and newer houses often stand exposed to wind and rain. Outside joints on exposed walls work hard.
The work is covered for a year after we finish. If anything isn’t right with it, email us at info@mrmastic.co.uk.
- Place
- Gilmerton (PH7)
- Wider area
- Perth and Kinross
- Cover
- 12 months on all our work
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Also near Gilmerton
More services for Gilmerton
What we can’t put right
We’d rather tell you now than do work that won’t last, so here’s what sealant can’t put right:
- Guttering that needs replacing
- Sagging gutters or broken brackets
- Roof leaks, slipped tiles or failed flashing (a roofer’s job)
If in doubt, send an email to info@mrmastic.co.uk and we will say what we think before booking.
Surfaces we seal
- Gutter end caps
- uPVC fascias
- Soffit joints
- Gutter joints
- Roofline trims
- Garage door frames
Why it’s worth doing now in Gilmerton
You do not need new fascias just because the joints have opened. Sealing the joints tidies them up if the boards are sound. In a place like Gilmerton, small leaks are easy to put off, but water behind a failed seal does the most damage when nobody’s watching.
Instead of a standard rate, we look at what your job involves: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
What you get with us
- Domestic, commercial and hotel work
- A sealant colour to suit the surroundings
- 12-month guarantee on every job
- 4.9 on Google from 180+ five-star reviews
Take a look at our cost guide and our reviews.
What happens on the day
When we arrive, we start by going over the job with you. Surfaces next to the work are protected before any work begins. The work generally takes a few hours, depending on the number of joints and the access. Outside jobs in Gilmerton need a dry day, because sealant will not bond to a wet joint, so an outdoor job can move if the forecast changes. Indoor work goes ahead whatever the weather.
- First we agree which joints need sealing.
- Each joint is cleaned and any old sealant removed.
- We make sure everything is dry.
- We apply exterior or gutter sealant and finish it neatly.
- We check our work before we leave.
Preparing for the visit
- Keep pets and children clear of the area while we work
- Move anything stored near the joints
- Let us know about stairs, lifts or work at height
Get a quote
Want a quote for gutter sealing? Please send an email to info@mrmastic.co.uk with a few details. We will explain what we’d do and send you a clear quote before work begins.
Related advice
Aftercare tips
Aftercare is simple:
- Check fascia and soffit joints for gaps
- Look at the gutters while it’s raining
- Look for streaks or damp on the wall below gutters
- Keep ladders off the guttering
Leave the new sealant to cure as we advise before poking or cleaning near it.
Early sealing limits how much water hits the wall. If we find a bigger problem, we’ll tell you.
Walls and rooflines in Gilmerton
Private landlords in Scotland must meet the Repairing Standard, which includes keeping a home wind and watertight, and sound outside sealant is part of that. Harled (roughcast) walls are common in Scotland, and joints where harling meets other materials need a sealant that can grip and flex.
Homes close to Gilmerton Church House include some older properties, and older walls, gutters and the joints where extensions meet them need a flexible sealant.
Gilmerton is about 14 miles west of Perth, in Perth and Kinross. If you need gutter sealing in Gilmerton, please send an email to info@mrmastic.co.uk for a quick quote. We cover Perth and Kinross from our Crawley base. Across Perth and Kinross, we cover 107 places, and Gilmerton is one of them. We also work in Dundee, around 32 miles away.
Postcode districts we cover here for gutter sealing: PH7. If you need gutter sealing at a property on Grahame Terrace and Perth Road or a nearby road, our applicators can take on the job. We also cover the places around Gilmerton: Crieff (2 miles south-west), St David's (4 miles south-east), Muthill (4 miles south), Madderty (4 miles south-east) and Tullibardine (6 miles south). We also work in nearby towns such as Perth (14 miles east), Auchterarder (8 miles south-east), Letham (13 miles east), Tulloch (13 miles east), Oakbank (13 miles east) and Hillyland (12 miles east).
Around Gilmerton
Other landmarks nearby include Crieff and Strathearn Museum (1.9 miles south-west) and Castle Cluggy (2.9 miles west). For a walk, there’s Loch Monzievaird.
DIY versus a professional finish
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
Do you need gutter sealing in Gilmerton?
When a gutter sags, its joints open. Sealing will not hold if the gutter keeps dropping, so the gutter needs refixing first.
Look out for these signs:
- Old sealant on roofline trims that has split
- Gaps along fascia and soffit joints
- Old gutter sealant that has let go
- Dripping gutter ends
In and around Gilmerton, as anywhere, good gutter sealing starts with a clean, dry, properly prepared joint.
Questions to ask before you book
- What the cure time is
- What happens if the job turns out different
- The length of the guarantee
- How the surfaces are prepared before sealing
What the job involves on each surface
Soffit joints
Soffits sit under the eaves, where joints can open up. We seal them to close the gaps.
Gutter end caps
End caps take the pressure of water running along the gutter. When their seal fails, they drip.