Argyll and Bute · Scotland

Duror Gutter Sealing

Sealing leaking gutter joints, end caps, fascias, soffits and roofline trims for homeowners, landlords and businesses in Duror. Fully insured, ARBOMaster approved and guaranteed for a year.

  • Rain getting in around a garage door
  • Drips from gutter joints and end caps
  • Trim joints where the sealant has failed

Trusted gutter sealing in Duror

About our gutter sealing in Duror

Garage door frames let rain in when the sealant around them fails. We cut out the old sealant and reseal the frame with an exterior sealant. Common call-outs are for rain getting in around a garage door and damp on an inside wall under a dripping gutter, on gutter joints, gutter end caps and garage door frames.

Across smaller places in Scotland, stone and harled cottages, farm buildings and newer houses often stand exposed to wind and rain. Outside joints on exposed walls work hard, so they need a sealant that moves with the building.

Whatever the size of the job, you get the same 12-month guarantee in Duror and across Argyll and Bute.

Mr Mastic applicator sealing the top of a white uPVC door frame on a red-brick house
Place
Duror (PA38)
Region
Argyll and Bute
Cover
12 months on all our work
Quote
A clear quote up front
Email
info@mrmastic.co.uk
Updated
26 October 2026

How to look after the new joints

Looking after new joints is easy, and it makes a real difference:

  • Clean out the gutters once or twice a year
  • Sort out a dripping joint early
  • Glance at the soffit joints now and then
  • Watch for drips in a downpour

While checking gutters, glance at the fascia joints too. A small split is quicker to put right.

Split sealant on fascias and trims lets water in behind. Resealing early protects the boards and the wall below.

Do you need gutter sealing in Duror?

Gutter joints rely on seals that age. Sun and cold make the gutter expand and contract and that movement opens up tired joints.

People usually contact us when they notice something like this:

  • Damp patches inside below a leaking gutter
  • Stop ends leaking at the end of a run
  • Drips from gutter joints and end caps
  • Fascia boards with gaps between them

In and around Duror, as anywhere, good gutter sealing starts with a clean, dry, properly prepared joint.

What your quote should include

  • Is the old sealant removed completely?
  • Is VAT in the price?
  • Whether you can choose the colour
  • How hidden problems are handled

Choosing a sealant specialist

Walls and rooflines in Duror

Duror is within about 1 mile of the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. That is hard on gutter, fascia and roofline joints, especially on the side facing the sea. Plenty of Scottish homes have harled walls, and where harling meets frames, pipes and other materials, the joint needs a flexible sealant that grips a rough surface.

For an older house near a landmark such as St Adamnan's Episcopal Church, the joints between older walls, newer extensions and the roofline need a sealant that can move.

Duror is in Argyll and Bute. Our applicators cover gutter sealing for homeowners, landlords and businesses in Duror, as part of our work across Argyll and Bute. Duror is one of 118 towns and villages in Argyll and Bute where we work for gutter sealing. We also work in Glasgow, about 67 miles from Duror.

Every address in PA38 is covered for gutter sealing. Other places close to Duror include Kentallen (2 miles north-east), Clo Mhuillin (5 miles north), Corran (5 miles north), Inchree (5 miles north) and Ballachulish (6 miles east). If you are somewhere remote, the job takes a little more planning, so let us know when you get in touch.

Near you in Duror

Open spaces near Duror include Ardsheal Hill.

Map of Duror © OpenStreetMap contributors

Landlords, agents and businesses in Duror

We also work for property managers and facilities teams. We can quote a run of properties together.

Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Resealing at the right time is simple maintenance.

Your questions about gutter sealing in Duror

Do you cover Duror for gutter sealing?

Yes. We work across all of Scotland, and Duror is part of that. Just drop us a line at info@mrmastic.co.uk with a few details of the job, and we will send you a clear quote.

Do you cover smaller places like Duror?

Yes, smaller places are covered as well as towns. We work across all of Scotland. Just mention lanes, gates or anything else about the route when you book.

Is it OK to seal over old sealant?

No, because it fails. The old sealant always comes out first, so the new joint bonds to clean surfaces.

Will there be a smell?

It depends on the product. Some smell for a while, some hardly at all, and any smell fades as they cure.

Do you remove the old sealant?

Yes, always, and completely. New sealant won’t bond properly to old, so the joint is cleaned back first.

Is gutter cleaning part of the job?

We clear debris around the joints we are sealing. Full gutter cleaning is a separate job.

Do I need to be at home?

It depends on the job. For work indoors, someone needs to let us in.

Can you do several jobs on one visit?

Of course. Doing several areas at once is normally more efficient, so mention them when you ask for a quote.

What happens if it’s left?

Leaving a leaking end cap can send water down the wall all winter. Resealing it is a quick job before the damage spreads. Around Duror, water from a failed joint in an older stone home can soak into timber and plaster.

Leaving a failed joint normally makes the job bigger, not smaller, because water and mould keep working on it. If you’re not sure whether it needs doing, drop us a line at info@mrmastic.co.uk and we will give you an honest view and a quote.

Why Duror customers choose us

  • A choice of colours where the product allows
  • Anti-fungal silicone where joints get wet
  • Experience in homes, commercial sites and hotels
  • 20+ years of sealant experience

See what affects the cost and customer reviews.

What affects the cost of gutter sealing

Every job gets its own quote. These are the things that affect it:

  • Any working-time requirements on site
  • Which sealant suits the joint
  • Any mould that needs treating
  • Access and height

We do not show prices on the website, because each job is priced on what it involves. Call for a quick quote.

What we need to know

Photos by email are helpful but not essential. Try to tell us:

  • What’s wrong with the joints now
  • The address or postcode of the job
  • Any access issues, like height or stairs
  • Whether it’s a home or a business

We do not publish a price list, as no two jobs are quite the same. Instead, your job gets its own clear quote. To get started, drop us a line at info@mrmastic.co.uk.

How it works

On the day, we look over the joints with you first, so you know exactly what we are doing. We protect the surfaces around the joints before any work begins. Most jobs take a few hours, depending on the number of joints and the access. Outdoor work around Duror depends on the weather, as sealant needs a dry surface, so an outdoor job can move if the forecast changes. Indoor work goes ahead whatever the weather.

  1. We find where the water is coming from and check the gutter is sound.
  2. We remove the old sealant and clean the joint.
  3. The joint is dried before sealing.
  4. We seal the joint with a sealant made for gutters.
  5. We check the run and clear debris near the joints.

Getting ready for the visit

  • Mention any parking rules near the property
  • Clear items away from the joints we are working on
  • Keep children and pets away from the work area

How to get a quote

Need a quote? Please drop us a line at info@mrmastic.co.uk with a few details. You’ll know what we plan to do, and what it will cost, before any work begins.

Get a price

Advice

DIY versus a professional finish

Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.

Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and does not move well, and the joint depth matters as much as the finish.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job