Hampshire · England

Gutter, fascia & soffit sealing in Crow, Hampshire

Gutter sealing across Crow and nearby, with every bit of old sealant taken out first.

  • Old gutter sealant that has let go
  • Water dripping where gutter sections meet
  • Fascia boards with gaps between them

Gutter sealing for Crow homes and businesses

What we do, step by step

The work is kept neat and contained to the area we are working on. The job generally takes a few hours, depending on the number of joints and the access, and we tell you how long to leave it before we go. Somewhere as small as Crow, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.

  1. We find where the water is coming from and check the gutter is sound.
  2. The old sealant and dirt are cleaned out of the joint.
  3. The joint is dried before sealing.
  4. A gutter sealant is applied to the joint.
  5. The gutter is checked and debris around the joints cleared.

How to prepare

  • Where the joints are inside, avoid wetting them before we arrive
  • Mention if the joints have been sealed before
  • Keep pets and children clear of the area while we work

Ask for a quote

There’s no standard price list, as no two jobs are quite the same. Instead, we give you a clear quote for your job. To arrange one, call 0345 464 0079 or drop us an email.

Get a price

Related advice

Gutter sealing in Crow

For gutter sealant to hold, the joint has to be clean and dry. That’s why we take out the old sealant and dirt first and the joint is dried before the new sealant goes in. We work on roofline trims, uPVC fascias and gutter end caps, and people most often call us about water running down the wall below the gutter and cracked sealant along roofline trims.

Around Crow, older buildings can be stone, brick or timber-framed, many with extensions added later. The joints where those materials meet are the weak points.

All our work comes with a one-year guarantee, wherever you are in Hampshire.

Place
Crow (BH24)
Region
Hampshire
Guarantee
A year, on every job
Price
A clear price before any work starts
Telephone
0345 464 0079
Last updated
26 October 2026
Mr Mastic applicator sealing the top of a white uPVC door frame on a red-brick house

Questions from Crow

Can you do gutter sealing in Crow?

Yes. Our work covers London and the South East, and Crow is part of that. You can phone 0345 464 0079 or drop us an email and let us know what needs doing, and we will send you a clear quote.

Will you come out to Crow?

Yes, smaller places are covered as well as towns. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.

Will sealant fix a dripping gutter joint?

In many cases, yes. A clean, dry joint resealed with gutter sealant generally stops the drip. A split or warped section needs replacing.

When is the sealant fully cured?

That depends on the sealant used, so please follow the time we give you when we finish.

Do you have insurance?

Yes. Mr Mastic is fully insured, with over 20 years’ experience in sealant work.

Can you do several jobs on one visit?

Yes, and it often makes sense. Combining jobs makes good use of the visit.

Can I do it myself?

That depends on the joint. High-level, external movement and fire-rated joints are professional jobs, while a short indoor joint may be within reach.

What does gutter sealing cost?

The cost depends on the size of the job, access and how much old sealant has to come out. Ask us for a quote and we will talk you through it.

For landlords and businesses

Housing providers, facilities teams and property managers book us too in Crow and across Hampshire. Several sites can go on one quote.

We work for letting agents and landlords as well as homeowners. Sealant work between tenants keeps a property looking cared for.

DIY sealant or a professional job?

If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.

A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.

Crow buildings and the weather

Compared with the north and west, the South East gets less rain, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day. With historic houses such as Avon Tyrrell House (about 2.4 miles south-east) nearby, there’s older building stock in the area around Crow as well as newer homes. In older buildings, older brick and stone need a sealant that suits them, at the right joint depth.

Managing a site like Ringwood Junior School? Then larger buildings have long runs of movement joint that eventually need resealing.

Crow is in Hampshire. Crow gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. We cover 683 towns and villages across Hampshire, large and small. Southampton is on our list too, about 17 miles from Crow.

All of BH24 is within our area for gutter sealing. You will find streets such as Barrack Lane, Wood End Road and Crow Lane. Neighbouring places we cover for gutter sealing include Upper Kingston (1 mile west), Hightown (1 mile north), Bagnum (1 mile south), Ringwood (1 mile north-west) and Poulner (1 mile north). Within a short drive, we also cover Totton (13 miles north-east), Lymington (11 miles south-east), New Milton (7 miles south-east), Barton on Sea (8 miles south-east), Dibden Purlieu (15 miles east) and Marchwood (14 miles east).

Around Crow

Around Crow, our work takes us to homes and buildings near Ringwood School and The Elm Tree Inn, among other places. Other landmarks nearby include St Leonard's Hospital (4.3 miles west). Open spaces near Crow include Blashford Lakes and Linbrook Lake.

Map of Crow © OpenStreetMap contributors

What affects the cost of gutter sealing

Every job gets its own quote. These are the things that affect it:

  • Which sealant suits the joint
  • How many rooms, windows or areas are involved
  • The size of the job
  • Whether there’s mould to deal with

Leaving a failed joint usually makes the job bigger, not smaller. If you are not sure whether it needs doing, phone 0345 464 0079 or drop us an email and we will give you an honest view and a quote.

What we need to know

A few details help us give you an accurate quote. When you get in contact, it helps to mention:

  • Pictures of the joints, sent by email
  • Whether it’s a home or a business
  • How many joints, rooms or windows are involved
  • The address or postcode of the job

Need a quote? Please ring 0345 464 0079 or send us an email and tell us about the job. You will know what we plan to do, and what it will cost, before any work begins.

Signs you need gutter sealing in Crow

Debris in the gutter keeps water sitting at the joints. Water that can’t drain works its way through a weak joint and drips through.

If you can see any of these, it’s time to have the joints looked at:

  • Water dripping where gutter sections meet
  • Quick sealant fixes on gutters that didn’t last
  • Wet patches on the wall under a gutter joint
  • Garage door frames letting rain in

Historic houses such as Avon Tyrrell House, about 2.4 miles south-east, show how far back building around Crow goes.

Before booking anyone

  • What product goes in the joint
  • Whether all the old sealant comes out first
  • Are they insured?
  • Who turns up on the day

How to choose a mastic man

Looking after it afterwards

Aftercare is simple:

  • Look at the gutters while it’s raining
  • Deal with a drip before winter
  • Clean out the gutters once or twice a year
  • Don’t leave a sagging gutter

If a gutter starts to sag, get the brackets looked at. Movement will pull the joints open again.

Once roofline sealant splits, water can get behind it. Resealing early protects the boards.

Different surfaces, different methods

Roofline trims

Trims along the roofline are often finished with sealant. When it splits, water can get behind.

Gutter joints

Gutter joints move and sit in water. A dedicated gutter sealant suits them.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job