Orkney Islands · Scotland

Gutter, fascia & soffit sealing in Brinian, Orkney Islands

Gutter and fascia joints in Brinian need attention? We remove the old material, prepare the joints and seal them properly, and the work is guaranteed for a year.

  • Stop ends leaking at the end of a run
  • Damp on an inside wall under a dripping gutter
  • Gaps along fascia and soffit joints

Gutter sealing in Brinian

About our gutter sealing in Brinian

Gutter and fascia replacement is not our trade, and nor is roofing. Sealant fixes joints and it can’t mend broken brackets, split sections or blocked downpipes. We work on soffit joints, gutter end caps and gutter joints, and common reasons people get in touch are stop ends leaking at the end of a run and trim joints where the sealant has failed.

Stone walls need a stone-friendly sealant, as acetoxy products can attack some stone. Newer houses need their movement joints and roofline trims kept sound.

Big or small, you get the same one-year guarantee.

Outdoor mastic being applied where a white frame meets red brickwork, below the fascia and gutter
Where
Brinian (KW17)
Wider area
Orkney Islands
Guarantee
One year on every job
Quotes
A clear quote up front
Email
info@mrmastic.co.uk
Last updated
26 October 2026

What affects the cost of gutter sealing

You will get a clear quote before any work starts. It’s based on:

  • The product the joint needs
  • The old material and how stubborn it is
  • Whether there’s mould to deal with
  • How easy the joints are to reach

No two jobs are quite the same, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all play a part.

What to tell us for a quote

To help us quote quickly, please include:

  • Pictures of the joints, sent by email
  • If it’s domestic, commercial or a hotel
  • Access, such as stairs, a lift or height
  • How many joints, rooms or windows are involved

A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints.

What we do, step by step

We bring everything the job needs with us, so there’s nothing for you to buy. Once we’ve agreed what’s being done, we protect the area and start. Most jobs take an hour or two for a few joints, longer for a full run. Somewhere like Brinian may be a longer drive, and the journey is planned ahead. Mention tracks, gates, ferries or anything else about the route.

  1. We look at where the water is coming from and check the gutter isn’t broken or sagging.
  2. The joint or trim is cleaned out and old sealant removed.
  3. We make sure the joint is dry before sealing.
  4. An exterior or gutter sealant is applied to the joint.
  5. We look along the gutter and clear debris around the joints.

Getting ready for the visit

  • Mention if the joints have been sealed before
  • Keep children and pets away from the work area
  • Where the joints are inside, avoid wetting them before we arrive

How to get a quote

Every job is quoted individually, so the first step is telling us about yours. Simply drop us a line at info@mrmastic.co.uk and describe the job and send pictures if you have them.

Get a price

Advice

Brinian questions

Is gutter sealing in a coastal place like Brinian any different?

Near the sea, outside joints face more wind, rain and salt than they would inland, so the choice of sealant and the preparation matter even more. Walls facing the sea are generally the first to need attention.

Is Brinian in your area for gutter sealing?

Yes, Brinian is within the area we cover. Our work covers the whole of Scotland. You can drop us a line at info@mrmastic.co.uk and let us know what needs doing, and we’ll send you a clear quote.

Does someone need to be in?

It depends on the job. For work indoors, someone needs to let us in, and for outside work we will agree access with you when we book.

Can I add another job to the visit?

Yes, and it often makes sense. Combining jobs makes good use of the visit, so mention them when you ask for a quote.

Is it worth trying it myself?

Some simple jobs can be done by a careful DIYer. Most DIY failures come from sealing over old material, wet joints or too much sealant.

Do you take out the old sealant first?

Yes, always, and completely. New silicone doesn’t stick to old silicone, so the joint is cleaned back first.

Can new sealant go over the old?

No. We remove every bit of old sealant first, so the new sealant bonds properly.

What should I tell you?

The location, the problem and the rough size of the job. Photos by email help too.

Do you need gutter sealing in Brinian?

End caps get knocked or pushed by water. Once the seal behind them fails, they drip and runs down the wall.

If you can see any of these, it’s time to have the joints looked at:

  • Failed sealant on a garage door frame
  • Drips from gutter joints and end caps
  • Fascia boards with gaps between them
  • Water running down the wall below the gutter

Around Brinian, as everywhere, gutter sealing is only as good as the preparation behind it.

Before you book anyone

  • Whether all the old sealant comes out first
  • What the quote includes, VAT included or not
  • When the joint can take water or movement
  • How long the guarantee is

Choosing a sealant specialist

What we cannot put right

In fairness, some problems need a different trade:

  • Blocked downpipes
  • Rotten or damaged fascia boards
  • Gutters that have dropped or pulled away

Not sure which it is? You can send an email to info@mrmastic.co.uk and we will tell you honestly.

Where we work in Brinian

  • Roofline trims
  • Soffit joints
  • Gutter end caps
  • uPVC fascias
  • Garage door frames
  • Gutter joints

Walls and rooflines in Brinian

Brinian is within about 1 mile of the coast, where wind-driven rain is a fact of life and, nearer the shore, so is salt air. That is hard on gutter, fascia and roofline joints, especially on the side facing the sea. Under the Repairing Standard, private landlords in Scotland have to keep homes wind and watertight, and sound outside sealant is part of that.

For jobs in and around Brinian, choosing the right material for each joint is as important as a tidy finish.

Brinian is about 10 miles north of Kirkwall, in the Orkney Islands. Every kind of property in Brinian is covered for gutter sealing. The work is guaranteed for a year. Our area takes in 51 places across the Orkney Islands.

Here we cover the KW17 postcode area for gutter sealing. Being close to the B9065, Brinian is simple for us to get to. Nearby, we also carry out gutter sealing in Tingwall (4 miles south-west), Evie (5 miles west), Gorseness (5 miles south), Isbister (6 miles south-west) and Norseman (7 miles south-west). Being one of the Orkney Islands’s larger places, Brinian has homes, rented property and businesses of every kind. Island and remote addresses take a little more planning, so tell us where you are when you ask for a quote.

Near you in Brinian

Nearby you’ll also find Langskaill House (3.5 miles south). Green spaces nearby include Loch of Oorns and Blotchnie Fiold.

Map of Brinian © OpenStreetMap contributors

What happens if it’s left?

Sealant won’t clear a blocked downpipe. We look at what’s really happening and point you to the right trade if needed. In a place like Brinian, small leaks are easy to put off, but water behind a failed seal does the most damage when nobody’s watching.

Combining jobs into one visit generally makes better use of the time than several visits, so it’s worth mentioning everything you’d like done. We will give you a clear price for the lot.

Why us?

  • Sanitary silicone with an anti-fungal additive in wet areas
  • More than 20 years in sealant work
  • Colour agreed with you before we start
  • We never seal over old sealant

Read what affects the cost and our reviews.

Different surfaces, different methods

Garage door frames

The joint between frame and brickwork moves and weathers. An exterior sealant suits them.

Roofline trims

Trims along the roofline are often finished with sealant. Split sealant lets water in.

DIY versus a professional finish

If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.

A DIY attempt doesn’t rule out a professional job. We remove it and do the joint properly.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job