Medway · England
Gutter, fascia & soffit sealing in Allhallows-on-Sea, Medway
Professional gutter sealing in and around Allhallows-on-Sea, with old sealant always removed completely.
- Old sealant on roofline trims that has split
- Damp patches inside below a leaking gutter
- Streaks down the brickwork from a leaking joint
Walls and rooflines in Allhallows-on-Sea
Allhallows-on-Sea is within about 1 mile of the coast, where wind-driven rain is a fact of life and, nearer the shore, so is salt air. Both are hard on gutter, fascia and roofline joints, which can dry out and crack sooner where a building faces the weather. London and the South East are among the drier parts of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.
Schools such as Allhallows Primary Academy are buildings too, and larger buildings have long runs of movement joint that eventually need resealing. Rented homes near Chalkwell station change hands often, and a gutter joint that drips onto the wall can turn into a damp complaint, so it’s worth checking.
Allhallows-on-Sea is about 4 miles south-east of Canvey Island, in Medway. For gutter sealing in and around Allhallows-on-Sea, please phone 0345 464 0079 or send us an email for a quick quote. We’re based in Crawley and cover Medway. Our Medway coverage runs to 68 places, Allhallows-on-Sea among them. For nearby work, see our Chelmsford page (20 miles or so).
We cover every part of the ME3 postcode area for gutter sealing. That includes homes and businesses on Avery Way, Queensway and Park End View. Other places close to Allhallows-on-Sea include Allhallows (1 mile south-west), Lower Stoke (1 mile south-west), Middle Stoke (2 miles south-west), Stoke (2 miles south-west) and St Mary Hoo (3 miles west). Within a short drive, we also cover Gillingham (8 miles south-west), Chatham (10 miles south-west), Rochester (9 miles south-west), Rainham (8 miles south), Strood (9 miles south-west) and Luton (9 miles south-west).
Landmarks near Allhallows-on-Sea
Around Allhallows-on-Sea, our work takes us to homes and buildings near Rose And Crown Public House and the streets around them. Allhallows-on-Sea’s nearest station is Chalkwell station, roughly 4.6 miles north of the centre. Well-known places in the area include Chartwell Private Hospital (5.2 miles north) and Bay Museum (3.8 miles north-west). Not far away are Two Tree Island.
Gutter sealing in Allhallows-on-Sea
Gutter and fascia replacement isn’t our trade, and nor is roofing. Sealant fixes joints; it will not fix a broken bracket, a cracked section or a blocked downpipe. If you are dealing with gaps along fascia and soffit joints and trim joints where the sealant has failed, we can put it right.
Somewhere as small as Allhallows-on-Sea, homes and farm buildings often face open ground, where walls and rooflines take the weather head on. Gutter joints and wall joints there need a sealant that can flex and stay put.
There’s a 12-month guarantee on every job, whatever its size.
- Where
- Allhallows-on-Sea (ME3)
- Region
- Medway
- Guarantee
- 12 months on all our work
- Quotes
- A clear quote up front
- Call
- 0345 464 0079
- Updated
- 26 October 2026

What happens if it’s left?
Water from a leaking joint hits the same spot every time. Over time that can stain brickwork, mark render and encourage damp, so it’s worth sealing early. In a small place like Allhallows-on-Sea, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
There are no prices on our website, because each job is priced on what it involves. Call for a quick quote and we’ll talk you through it.
Why Allhallows-on-Sea clients choose us
- Fully insured
- Domestic, commercial and hotel work
- An ARBOMaster approved applicator
- Quality sealants from Arbo and Everbuild
See how sealant jobs are priced and our reviews.
Landlord and commercial work in Allhallows-on-Sea
Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. We can quote for more than one property at once.
If you manage several properties in or around Allhallows-on-Sea, jobs at different addresses can be quoted together. Just tell us the addresses and what each one needs.
What we’re called out for in Allhallows-on-Sea
Roofline sealant ages in sun and rain. It goes hard, cracks and pulls away after some years.
People usually contact us when they notice one of these:
- Internal damp traced to a gutter joint
- Water dripping where gutter sections meet
- Trim joints where the sealant has failed
- Rain getting in around a garage door
In the older streets around Church of All Saints, an extension built onto an older house moves differently, and the joint between them takes the strain.
Questions to ask before booking
- Is the old sealant removed completely?
- How the colour is chosen
- Which sealant they’ll use, and why
- How long the guarantee is
The process
All our tools and materials come with us in the van, so there’s nothing for you to buy. After a quick look at the joints together, the area is protected and the work begins. It normally takes anything from an hour or two to a few hours. In a small place like Allhallows-on-Sea, access is usually the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- First, we find the drip and check the gutter isn’t cracked or sagging.
- Old sealant and dirt are removed from the joint.
- The area is dried so the sealant can bond.
- An exterior or gutter sealant is applied to the joint.
- We check the run and clear any debris we find while we’re there.
How to prepare
- Tell us if parking is tricky
- Clear items away from the joints we are working on
- Let us know about stairs, lifts or work at height
Ask for a quote
Asking for a quote is easy: let us know the job and the location. A few pictures by email make the job easier to understand, and we’ll take it from there.
Related advice
Different surfaces, different methods
Roofline trims
Trims along the roofline are often finished with sealant. When it splits, water can get behind.
Soffit joints
Soffit board joints can separate over time. They’re sealed to tidy the line.
Nearby places to Allhallows-on-Sea
Also in Allhallows-on-Sea
Allhallows-on-Sea: your questions answered
Do you work for landlords with property near Chalkwell station?
Yes, we work for landlords and agents. You can phone 0345 464 0079 or email us with the address and a few details, and we’ll give you a fixed price before any work starts.
Does the coastal weather in Allhallows-on-Sea affect outside sealant?
Near the sea, outside joints face more wind, rain and salt than they would inland, so the choice of sealant and the preparation matter even more. Walls facing the sea are usually the first to need attention.
Do you come to Allhallows-on-Sea?
Yes. From our base in Crawley, we cover South East England, London and all of Scotland, Allhallows-on-Sea included.
Do you replace gutters or fascias?
We don’t replace gutters or fascias. We will tell you if the gutter needs replacing so you can call the right trade.
Can I choose the sealant colour?
We will suggest a colour to suit the surroundings. The choice depends on the product the joint needs.
Are you fully insured?
Yes. We are fully insured.
Will the old sealant be removed?
Yes. Sealing over old sealant is the main reason resealing fails early, and it’s something we never do.
What sealant do you use?
Each joint gets the product that suits it. Where it moves, gets wet or faces the weather makes a difference, and we’ll tell you what we’re using.
Aftercare tips
No joint lasts for ever, but care makes a real difference. Our tips:
- Look for streaks or damp on the wall below gutters
- Don’t leave a sagging gutter
- Rest ladders on the wall, not the gutter
- Keep downpipes clear
Look at fascia and trim joints when you are checking the gutters. Splits are easier to seal early.
A leaking garage frame lets water reach stored items. Resealing the frame is a quick job while the frame is sound.
Can I do it myself?
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.
The biggest DIY mistake is sealing over old sealant. Silicone doesn’t stick to old silicone, so it peels away and traps moisture behind it. All the old material has to come out first.
