Medway · England
Gutter, fascia & soffit sealing in Stoke, Medway
Gutter sealing for Stoke, by sealant specialists with 20+ years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Rain getting in around a garage door
- Dripping gutter ends
- Leaking gutter joints and stop ends
Gutter sealing in Stoke
Gaps along uPVC fascias and soffits look untidy and can let in water and draughts. They’re sealed in a matching colour where one is available. We are often asked to deal with old sealant on roofline trims that has split and leaking gutter joints and stop ends, on soffit joints, garage door frames and roofline trims.
Older homes in small places like Stoke may be stone, brick or timber-framed, often with later extensions. Where one material meets another is where water usually gets in, and they need the right sealant at the right depth.
All of our work is guaranteed for twelve months, and the guarantee is the same wherever you are.
- Where
- Stoke (ME3)
- Region
- Medway
- Cover
- One year on every job
- Quote
- A clear quote up front
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
What gutter sealing looks like in Stoke
Stoke is close to the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. Both are hard on gutter, fascia and roofline joints, which can dry out and crack sooner where a building faces the weather. Rainfall in the South East is lower than in much of the UK, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.
Schools such as Stoke Primary Academy are buildings too, and movement joints, cladding joints and gutters on larger buildings need the same care as a house’s.
Stoke is about 5 miles north of Gillingham, in Medway. If you need gutter sealing in Stoke, it’s easy to get a quote: please ring 0345 464 0079 or drop us an email. We’re based in Crawley and cover Medway. Our area takes in 68 places across Medway, large and small. For nearby work, see our Chelmsford page.
Here we cover the ME3 postcode area for gutter sealing. Whether your property is on Vicarage Lane and Vicarage Close or anywhere close by, we can help. Nearby, we also carry out gutter sealing in Middle Stoke (1 mile east), Lower Stoke (1 mile north-east), North Street (1 mile south-west), Tunbridge Hill (1 mile south-west) and St Mary Hoo (1 mile north-west). We also work in nearby towns such as Gillingham (5 miles south), Chatham (7 miles south-west), Rochester (7 miles south-west), Rainham (6 miles south), Strood (7 miles south-west) and Luton (6 miles south-west).
What’s near Stoke
We work in homes and buildings around The White Horse pub. Well-known places in the area include Medway Maritime Hospital (5.7 miles south-west) and Upnor Castle (4.8 miles south-west). Not far away are Bishop Saltings.
Why it’s worth doing now in Stoke
New gutters cost far more than a few resealed joints. If the gutter is sound and the drip is a joint, resealing is the sensible fix. If it’s broken or sagging, a gutter installer needs to look. Where a wall is exposed, as many are in small places like Stoke, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
No two jobs are quite the same, so we quote each one individually. Size, access and the product the joint needs all play a part, and we will explain the quote if you ask.
Why choose Mr Mastic in Stoke
- White, clear, grey or another colour, product permitting
- We agree the colour with you first
- Sealant colour chosen to suit
- Approved under the ARBOMaster scheme
Read our cost guide and customer reviews.
Landlords, agents and businesses in Stoke
For anyone letting property in or around Stoke, several properties can go on one quote. Just tell us the addresses and what each one needs.
Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.
The process
On the day, we look over the joints with you first. We protect the surfaces around the joints before any work begins. The work normally takes an hour or two for a few joints, longer for a full run. Somewhere like Stoke needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- We start by tracing the leak and checking the gutter itself is sound.
- The joint or trim is cleaned out and old sealant removed.
- The joint is dried, because sealant will not bond to a wet surface.
- An exterior or gutter sealant is applied to the joint.
- We look along the gutter and clear debris around the joints.
Before we arrive
- Plan for the work area to be out of bounds to pets and children
- On commercial sites, let us know about site rules
- Tell us about any previous sealing or DIY attempts
Ask for a quote
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints, and email pictures if that is easy.
Read more
More services for Stoke
Signs you need gutter sealing in Stoke
A sealant applied to a damp or dirty joint will not bond. Rushed repairs often do not last long.
Common reasons people contact us are:
- Internal damp traced to a gutter joint
- Trim joints where the sealant has failed
- Old gutter sealant that has let go
- Stop ends leaking at the end of a run
If you live in an older home near Church of St Peter and St Paul, old and new materials meet at the roofline and walls, which is where sealant earns its keep.
What your quote should include
- How the joint is cleaned and prepared
- Whether they seal over old material or remove it
- What happens if the job turns out different
- What the cure time is
Keeping the joints in good condition
So the new joints stay in good condition:
- Keep an eye out for wet patches below a joint
- Keep the gutters clear of debris
- Keep downpipes clear
- Have sagging gutters refixed early
Keep the gutters clear of leaves and moss so water does not sit on the joints. Water left in a gutter tests every joint.
A leaking garage frame lets water reach stored items. A reseal sorts it while the frame is sound.
Quotes for gutter sealing in Stoke
The price is agreed before any work begins. It takes into account:
- How many areas need sealing
- The product the joint needs
- Any working-time requirements on site
- Mould in or behind the old joints
A few things move the cost up or down: the old material and how easily it comes out, any mould to treat, and whether we need extra access for height. We take all of that into account in your quote.
What to tell us for a quote
To help us quote quickly, let us know:
- How we’d reach the joints
- Pictures of the joints, sent by email
- The rough size of the job
- Where the job is, and your postcode
We quote each job on its own, so start by telling us what you need. Just phone 0345 464 0079 or drop us an email with the details, and photos are welcome.
Common questions in Stoke
Will you come out to Stoke?
Yes, we do. We work across London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
Does living near the coast affect gutter sealing in Stoke?
Near the coast, wind-driven rain and, nearer the shore, salt air make outside sealant work harder. Choosing the right sealant for the frame and wall, laid at the right depth, helps it last.
Will there be a smell?
Possibly a little. Any smell clears as the sealant cures.
What should I tell you?
The location, the problem and the rough size of the job. Photos by email help too.
Are you insured?
Yes. We’re fully insured for every job we do.
What about gutters on a second or third storey?
It depends on the access. Let us know the height and the ground below and we’ll confirm what’s needed.
What sealant do you use?
Each joint gets the product that suits it. Where it moves, gets wet or faces the weather makes a difference, and we’ll explain our choice.
Is the work guaranteed?
You get our 12-month guarantee on every job.
DIY sealant or a professional job?
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions, then guaranteed for a year.