Medway · England
Fire-rated sealant in Allhallows-on-Sea, Medway
Intumescent and fire-rated sealant around gaps, frames and service penetrations for householders, landlords and businesses in Allhallows-on-Sea. Fully insured, ARBOMaster approved and guaranteed for a year.
- Joints picked up in a fire-stopping survey
- Open gaps behind door architraves
- Cracked or shrunken fire-rated sealant
Fire rated sealant for homes and businesses in Allhallows-on-Sea
A fire seal relies on being installed the way it was tested: the right depth, the right backing and the right product for the substrate. That detail is what we take care over. Common call-outs are for unsealed gaps around fire door frames and gaps around pipes and cables through fire-resisting walls, on plasterboard & masonry, door frames and service penetrations.
For a small place like Allhallows-on-Sea, the journey and timings are agreed in advance, so the job can fit around bookings, guests or opening times where possible.
Whatever the size of the job, it’s backed by our one-year guarantee.
- Location
- Allhallows-on-Sea (ME3)
- Wider area
- Medway
- Guarantee
- One year on every job
- Price
- A clear price before work begins
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
What we do, step by step
At the end, we look at the finished work together and explain the cure time. The work normally takes anything from a few hours to several days, depending on how many gaps there are, depending on how much there is to do. In a small place like Allhallows-on-Sea, access is normally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We go through the gaps on your list or survey and check each one’s size and substrate.
- We remove any old or unsuitable filler and clean the gap.
- Where the tested detail needs backing or fill, we fit it.
- The sealant goes in to the depth its detail sets, then it’s tooled off.
- Finally, we list where we worked and what we used, for your records.
How to prepare
- Let us know about stairs, lifts or work at height
- Try not to wet indoor joints just before the visit
- Keep pets and children clear of the area while we work
Getting a quote
For a quote, call 0345 464 0079 or email us with the location and a short description of the problem. You’ll have a clear quote before we start.
Advice
What affects the quote in Allhallows-on-Sea
There’s no set price list, because jobs vary so much. What we look at:
- The size of the job
- The old material and how stubborn it is
- Mould in or behind the old joints
- How easy the joints are to reach
A failed joint rarely gets cheaper to fix by waiting, as water and mould keep getting in. If you are unsure, phone 0345 464 0079 or send us an email for an honest opinion and a quote.
Asking for a quote
A few details help us give you an accurate quote. When you ask for a quote, tell us:
- Photos by email, if that is easy
- How many joints, rooms or windows are involved
- Where the job is, and your postcode
- If it’s domestic, commercial or a hotel
We don’t publish a price list, because every job is different. Instead, we send you a clear quote for your job. To get started, call 0345 464 0079 or send us an email.
What we’re called out for in Allhallows-on-Sea
Movement in the structure can open gaps too: cracked or debonded sealant leaves an open route through the wall. Knocks, maintenance and building work damage it further.
People usually contact us after spotting one of these:
- Gaps left after a refit or conversion
- Seals cut through by electricians, plumbers or data installers
- Gaps around pipes and cables through fire-resisting walls
- Ordinary sealant used where a fire-rated product was needed
Community buildings like Church of All Saints are part of the picture too: service openings in its walls need the right fire-rated sealant, as in any building.
Before booking anyone
- What the cure time is
- Whether VAT is included
- How the colour is chosen
- Whether the sealant suits the joint
Also near Allhallows-on-Sea
More services for Allhallows-on-Sea
How to look after the new joints
Once the sealant has cured, a few habits help it last:
- Don’t paint over fire sealant until it has cured
- File the fire-stopping record where your assessor can find it
- Report cracked or damaged seals as soon as you notice them
- Include hidden areas like risers in routine checks
Any fire seal that’s cut or drilled needs resealing to its tested detail. New services through a sealed wall should include fire stopping in the plan.
It’s easiest to seal gaps while they’re few and easy to reach. Leave them and each new job adds another hole.
Fire rated sealant in Allhallows-on-Sea: local notes
If you run a hotel, guest house or holiday let in a coastal place like Allhallows-on-Sea, busy months put washrooms and kitchens under pressure, so it’s worth checking the sealant before the busiest weeks. In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
Managing a site like Allhallows Primary Academy? Then service openings in fire-resisting walls need checking after any refurbishment. Rented homes near Chalkwell station change hands often, and any gap left by new services in shared walls should be closed with a fire-rated product.
Allhallows-on-Sea is about 4 miles south-east of Canvey Island, in Medway. Every kind of property in Allhallows-on-Sea can book us for fire rated sealant, old or new, large or small. Every job comes with our one-year guarantee. 68 places in Medway are on our list, large and small. For nearby work, see our Chelmsford page (20 miles or so).
Jobs for fire rated sealant in ME3 is quoted and booked the same way as anywhere else. We cover properties on Avery Way, Queensway and Park End View. Other places close to Allhallows-on-Sea include Allhallows (1 mile south-west), Lower Stoke (1 mile south-west), Middle Stoke (2 miles south-west), Stoke (2 miles south-west) and St Mary Hoo (3 miles west). Further out, we also cover Gillingham (8 miles south-west), Chatham (10 miles south-west), Rochester (9 miles south-west), Rainham (8 miles south), Strood (9 miles south-west) and Luton (9 miles south-west).
What’s near Allhallows-on-Sea
We work in homes and buildings around Rose And Crown Public House and the streets around them. The nearest railway station is Chalkwell station, roughly 4.6 miles north. Other landmarks nearby include Chartwell Private Hospital (5.2 miles north) and Bay Museum (3.8 miles north-west). For a walk, there’s Two Tree Island.
Leave it or put it right?
Sealant is not the fix for every opening. Large holes, cable bundles and plastic pipes can call for batts, collars or wraps. We will say so if a gap needs something other than sealant. Older cottages and farmhouses around Allhallows-on-Sea can have timber floors and frames, and water through a failed joint can rot timber if it’s left.
Every job is a little different, so each one gets its own quote. Size, access and the product the joint needs all make a difference.
Why Allhallows-on-Sea customers choose us
- Every job guaranteed for a year
- We leave the area clean and tidy
- Sanitary silicone with an anti-fungal additive in wet areas
- Homes, businesses and hotels
Take a look at how sealant jobs are priced or what customers say.
Surface by surface
Service penetrations
A copper pipe, a cable and a plastic pipe can all need different fire-stopping details. We follow the manufacturer’s tested detail for each, and tell you if sealant alone is not the right fix.
Masonry and concrete
Brick, block and concrete walls and floors are sealed with products tested in masonry. The gap is cleaned of dust first so the seal has something sound to bond to.
Should I try it myself first?
Sealing over old silicone is the commonest DIY error. New silicone won’t bond to old, so it peels away and traps moisture behind it. Everything old must be removed first.
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
Questions from Allhallows-on-Sea
Do you work for landlords with property near Chalkwell station?
Yes, rental work is part of what we do. You can ring 0345 464 0079 or drop us an email with the address and a few details, and we’ll give you a fixed price before any work starts.
Is Allhallows-on-Sea within the area you cover?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Is it worth trying it myself?
It depends on the job. Work at height, movement joints, fire-rated gaps and large areas are best left to a professional, while a short indoor joint may be within reach.
Are you fully insured?
Yes. Mr Mastic is fully insured, with over 20 years’ experience in sealant work.
How do I get a quote for fire rated sealant in Allhallows-on-Sea?
Size, access and the old material all affect the cost. Call for a quick quote and we will talk you through it.
Will it make a mess?
We keep the work tidy. We protect what’s around the joints, and the area is left clean when we finish.
Can you tell me which gaps need fire stopping?
No, assessment is not something we do. Once you have a specification or action list from your assessor or designer, we can quote for the fire-rated sealant items.
Do you provide details of the products used?
Yes. Locations and products are written up when we finish. Tell us if your assessor needs it in a particular format.