Isle of Wight · England
Glazing Silicone in Puckpool
Glazing silicone in Puckpool from a team with over 20 years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Drips on the inside of a conservatory window
- Cracked silicone between glass panels
- Rooflight joints letting water in
Glazing silicone for homes and businesses in Puckpool
Sealant on glazing does not last for ever. Sun, rain and movement wear it down and cracked joints let water in. Resealing puts that right. If you have water escaping where a screen meets the wall and water getting into a conservatory at the joints, we can put it right, on glass-to-frame joints, glass-to-glass joints and glass balustrade bases alike.
In a village or hamlet like Puckpool, older cottages and farmhouses often have timber windows set in stone or brick. Not every older frame suits a modern silicone bead, so the sealant has to be chosen to suit the building.
Whatever the size of the job, it’s backed by our one-year guarantee in Puckpool and across the Isle of Wight.
- Location
- Puckpool (PO33, PO34)
- Wider area
- Isle of Wight
- Cover
- One year on every job
- Quotes
- Quoted before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Questions from Puckpool
Do you cover smaller places like Puckpool?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
I let a flat near Ryde St Johns Road station. Can you help?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. Just ring 0345 464 0079 or drop us an email with the address and what needs doing, and we’ll give you a clear price.
Can you just put new silicone over the old?
A top-up rarely holds. Fresh silicone will not bond to cured silicone so we take it all out and start clean.
Will you leave a mess?
Not at all. We work neatly, protect the area around the joints and tidy up afterwards.
Is the work guaranteed?
All our work has a one-year guarantee.
Where is Mr Mastic based?
We work from Crawley. Our applicators cover Puckpool.
What information do you need?
A short description and the location. We will ask anything else we need to know.
How long does the job take?
That depends on the amount of work, but as a guide it takes anything from an hour or two to most of a day, depending on the size of the job. We’ll tell you when we quote.
What we do, step by step
Good joint work is mostly preparation, so that’s where we spend the time. Joints are cleaned back and dried before anything new goes in. In total, it normally takes a few hours for most jobs. For a village or hamlet like Puckpool, the journey is planned in advance: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- We find where water is getting in and check whether it’s a sealant joint.
- We cut out the failed silicone, taking care of the glass and frame.
- We clean the joint with a solvent that suits the glass and frame.
- Glazing silicone suited to the joint is applied and tooled.
- We look over every joint and, where we can, test it with water.
Getting ready for the visit
- Where the joints are inside, avoid wetting them before we arrive
- Keep children and pets away from the work area
- Tell us about any previous sealing or DIY attempts
How to get a quote
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is. Whenever you are ready, ring 0345 464 0079 or send us an email.
Advice
What else we do in Puckpool
Leave it or put it right?
Glazing joints need a sealant made for the job. A general-purpose tube may not bond well or may react with the frame, so we use neutral-cure glazing silicone. Where a wall is exposed, as many are in small places like Puckpool, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
What you pay reflects the work, not guesswork. That’s why we ask a few questions first.
Why book with us
- Experience in homes, commercial sites and hotels
- You choose the colour before work begins
- More than 20 years in sealant work
- Neat joints and a tidy finish
Read what affects the cost and customer reviews.
Landlords, agents and businesses in Puckpool
Hotels need rooms back in use, so we plan the work room by room around your bookings where we can. We have worked in hotels as well as homes and businesses.
If you manage several properties in or around Puckpool, several properties can go on one quote. Send us the addresses and the work at each, and photos by email help.
Puckpool homes and the weather
Puckpool is within about 1 mile of the coast, where wind-driven rain is a fact of life and, nearer the shore, so is salt air. That’s hard on glazing joints and frame seals, especially on the side facing the sea. With historic houses such as Nunwell House (about 3.1 miles south) nearby, there’s older building stock in the area around Puckpool as well as newer homes. In older buildings, older timber frames in brick or stone need a different approach from a modern uPVC window.
Letting a property close to Ryde St Johns Road station? Then leaking glazing joints, shower screens or conservatory seals are worth sorting between tenancies. Managing a site like Oakfield Church of England Aided Primary School? Then larger buildings have plenty of frames, and the mastic around each one ages.
Puckpool is about 1 mile east of Ryde, in the Isle of Wight. Wherever you are in the PO33 postcode area, we cover glazing silicone for homes and businesses. Our area takes in 125 places across the Isle of Wight, large and small. Our Portsmouth page covers work nearby (6 miles or so).
Jobs for glazing silicone in PO33 and PO34 is quoted and booked the same way as anywhere else. We cover properties on Appley Road, Appley Lane and Seldon Avenue. Neighbouring places we cover for glazing silicone include Appley (1 mile west), Spring Vale (1 mile east), Pondwell (1 mile south-east), Elmfield (1 mile south-west) and Oakfield (1 mile south-west). We also work in nearby towns such as Newport (7 miles west), Cowes (8 miles west), Sandown (5 miles south), Shanklin (7 miles south), Ventnor (10 miles south) and East Cowes (7 miles west). For island and remote addresses, the job takes a little more planning, so mention it when you ask for a quote.
Local landmarks in Puckpool
We work in homes and buildings around Ryde School with Upper Chine, Appley Manor Hotel and Ryde Academy. The closest station to Puckpool is Ryde St Johns Road station, about 1 mile west. Nearby you will also find Cothey Bottom Heritage Centre (1.1 miles south) and Southsea Castle (4.1 miles north-east). The countryside around Puckpool includes Alan Hersey Nature Reserve and Brading Down.
When it isn’t the sealant
New sealant can’t fix everything, and we’d rather say so up front. Sealant will not put right:
- Misting between the panes of a double-glazed unit (a failed unit for a glazier)
- A frame that needs repairing or replacing
- A sagging or failing conservatory roof
If you are not sure, just phone 0345 464 0079 or email us and we will give you a straight answer.
Surfaces we seal
- Glass-to-glass joints
- Glass balustrade bases
- Shower screens
- Conservatory frames
- Glass-to-frame joints
- Rooflights
Signs you need glazing silicone in Puckpool
UV light ages silicone and roof joints get the most sun. It goes brittle, cracks and stops sticking on the glass.
The most common problems we see are:
- Conservatory leaks at frame and glazing joints
- Glass-to-glass joints that have split
- Water running down inside the glass
- New silicone smeared over old sealant
For an older house near a landmark such as St John's Church, the windows may be timber, sash or later replacements, and each needs the right sealant against the wall.
What your quote should include
- What the cure time is
- Whether VAT is included
- Is the old sealant removed completely?
- Are they insured?
What affects the quote in Puckpool
Jobs vary more than people expect. The main factors:
- How much there is to do
- Whether there’s mould to deal with
- How easy the joints are to reach
- The old material and how stubborn it is
Rather than a set price list, we price the job in front of us: how many joints, what’s in them now and how we reach them. You’ll know the price before we begin.
Asking for a quote
Photos by email are helpful but not essential. Try to tell us:
- Pictures of the joints, sent by email
- The type of property
- If someone has resealed it before
- How we’d reach the joints
Want a quote for glazing silicone? Please call 0345 464 0079 or drop us an email and tell us about the job. We will explain what we’d do and send you a clear quote before we start.
DIY sealant or a professional job?
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is.
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.