Isle of Wight · England

Moortown Glazing Silicone

Glazing silicone for Moortown, by sealant specialists with 20+ years’ experience. Rated 4.9 on Google from 180+ five-star reviews.

  • Sealant that was laid over old silicone and failed
  • Mouldy sealant around glass panels
  • Split or lifting silicone on glass

Glazing silicone for Moortown homes and businesses

Questions from Moortown

Is glazing silicone in a coastal place like Moortown any different?

Near the sea, outside joints face more wind, rain and salt than they would inland, so the choice of sealant and the preparation matter even more. It’s worth checking the walls that face the sea first.

Can you do glazing silicone in Moortown?

Yes, Moortown is within the area we cover. Our work covers London and the South East. You can phone 0345 464 0079 or email us and tell us what needs doing, and we’ll give you a clear quote.

How much does glazing silicone cost in Moortown?

Every job is different, so each one gets its own quote. For a quick quote, phone 0345 464 0079 or drop us an email with a short description of the job.

Where are you based?

We are a Crawley-based firm. Our area covers South East England, London and Scotland.

Can you quote for more than one area?

Yes, we can. More than one area can go on one quote.

What guarantee do I get?

Every job comes with our 12-month guarantee.

Which products do you use?

The product depends on the job: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. We use products from Arbo and Everbuild.

Can you replace a misted double-glazed unit?

We do not replace glass. We reseal the joints around it and can tell you if a unit seems to have gone.

Glazing silicone in Moortown, done properly

Glass, frames and walls all move at different rates, and the silicone between them takes the strain. When it cracks or lets go, water gets in. We cut it out and reseal with a glazing silicone suited to the joint. We work on glass-to-glass joints, shower screens and glass balustrade bases, and people most often call us about drips on the inside of a conservatory window and water escaping where a screen meets the wall.

Mastic can only go onto a dry, clean joint, so window work in Moortown is booked around the forecast. Let us know about access to all the frames, upstairs ones included.

Your job is guaranteed for a year, as with all our work.

Where
Moortown (PO30)
Wider area
Isle of Wight
Guarantee
12 months on all our work
Quote
A clear quote up front
Telephone
0345 464 0079
Page updated
26 October 2026
Fresh white silicone going into the corner where a shower screen meets the tiled wall

DIY sealant or a professional job?

If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.

A DIY attempt doesn’t rule out a professional job. We remove it and do the joint properly, so just mention it when you contact us.

The process

Our applicators work methodically: protect, prepare, seal, tidy. For most jobs that takes anything from an hour or two to most of a day, depending on the size of the job, and the area is left clean. In a small place like Moortown, access is usually the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.

  1. First we agree the joints to be done.
  2. We cut away the failed silicone.
  3. The surfaces are cleaned with a suitable solvent.
  4. New glazing silicone goes in and is finished neatly.
  5. We inspect the work and test it where we can.

Preparing for the visit

  • Where the joints are inside, avoid wetting them before we arrive
  • For business premises, tell us about site rules or sign-in
  • Clear items away from the joints we’re working on

Ask for a quote

Want a quote for glazing silicone? Please ring 0345 464 0079 or email us and tell us about the job. You’ll know what we plan to do, and what it will cost, before any work begins.

Get a quick quote

Advice

What glazing silicone looks like in Moortown

Moortown is close to the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. That is hard on glazing joints and frame seals, especially on the side facing the sea. The South East is one of the drier parts of the UK, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day.

Schools such as Brighstone Church of England Aided Primary School are buildings too, and its window and door frames need their mastic kept sound, just like a home’s.

Moortown is about 6 miles south-west of Newport, in the Isle of Wight. Homes, rented property, offices and hotels in Moortown is covered for glazing silicone, old or new, large or small. The work is guaranteed for a year. Across the Isle of Wight, we cover 125 places, and Moortown is one of them. Portsmouth is on our list too, around 18 miles away.

Every address in PO30 is within our area for glazing silicone. Glazing silicone is available to properties on Main Road, Moor Lane and Upper Lane. We also cover Brighstone (1 mile south), Thorncross (1 mile south-east), Shorwell (2 miles east), Little Atherfield (3 miles south-east) and Atherfield Green (3 miles south-east). Within a short drive, we also cover Newport (6 miles north-east), Ryde (12 miles north-east), Cowes (9 miles north-east), Sandown (10 miles east), Shanklin (10 miles east) and Ventnor (9 miles south-east). Remote and island addresses need a little more planning, so tell us where you are when you ask for a quote.

Landmarks near Moortown

We work in homes and buildings around The Three Bishops pub and the streets around them. Other landmarks nearby include Brighstone Village Museum (under half a mile south) and Whitecroft Hospital (4.5 miles east). The countryside around Moortown includes Brighstone Down.

Map of Moortown © OpenStreetMap contributors

For landlords and businesses

We work for landlords and agents as well as homeowners. Sealant work between tenants is a simple way to keep a property in good order before the next move-in.

For anyone letting property in or around Moortown, jobs at different addresses can go on one quote. Just tell us the addresses and what each one needs, and pictures by email help.

How we quote for glazing silicone

The quote reflects the job in front of us. We look at:

  • When we can work, for business premises
  • Any mould that needs treating
  • Whether old sealant or filler has to be cut out
  • How much there is to do

A failed joint rarely gets cheaper to fix by waiting, because water and mould keep working on it. If you are not sure whether it needs doing, ring 0345 464 0079 or send us an email for an honest opinion and a quote.

What to tell us for a quote

There’s no need for technical detail. It helps if you can tell us:

  • Photos by email, if that’s easy
  • The rough size of the job
  • If someone has resealed it before
  • Any access issues, like height or stairs

Call for a quick quote, or email us if that is easier. Tell us about the joints that need doing and we will explain what’s involved and give you a clear price.

Why it’s worth doing now in Moortown

Leaks get worse, not better. Water can damage frames, walls, flooring and furniture, so it pays to deal with it early. Older cottages and farmhouses around Moortown can have timber floors and frames, and water through a failed joint can rot timber if it’s left.

A few things move the cost up or down: the old material and how easily it comes out, whether mould needs treating, and whether we need extra access for height. We take all of that into account in your quote.

Why choose Mr Mastic in Moortown

  • 20+ years of sealant experience
  • Sanitary silicone with an anti-fungal additive in wet areas
  • Domestic, commercial and hotel work
  • We agree the colour with you first

Take a look at our cost guide and our reviews.

Surface by surface

Glass-to-frame joints

We cut the old silicone from the glass without scratching it and reseal with glazing silicone.

Shower screens

Mouldy or lifting sealant on a screen leaks. Cutting it out and resealing fixes it.

Common problems we fix in Moortown

Silicone won’t bond to a dirty surface. Where the joint wasn’t cleaned and degreased the sealant may lift within a few years.

People usually contact us when they notice something like this:

  • Glazing silicone that has cracked or come away
  • Leaks from the base of a shower screen
  • Glass-to-glass joints that have split
  • Water getting into a conservatory at the joints

In the older streets around St. Mary's Church, replacement windows fitted into old openings often leave uneven gaps that need backing and a flexible joint.

Comparing quotes

  • What happens if the job turns out different
  • Whether the sealant suits the joint
  • What the quote includes, VAT included or not
  • How the surfaces are prepared before sealing

Our hiring checklist

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job