Isle of Wight · England
Glazing Silicone in Haylands
Glazing silicone in Haylands from a team with over 20 years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Conservatory leaks at frame and glazing joints
- Water tracking down the inner face of the glass
- Sealant that was laid over old silicone and failed
How we handle glazing silicone in Haylands
We work across Haylands on glazing joints for homes and businesses. From conservatories to shower screens, it’s the same careful method, with a sealant chosen for the joint. We work on glass-to-glass joints, conservatory frames and glass-to-frame joints, and the jobs we see most are a quick top-up bead that didn’t last and water running down inside the glass.
Homes around Haylands range from older properties to newer houses, and their windows range just as widely. Each frame material needs the right sealant against the right wall.
We guarantee the work for a year. If something is not right with it in that time, tell us and we will put it right.

- Where
- Haylands (PO33)
- Wider area
- Isle of Wight
- Guarantee
- 12 months on all our work
- Quote
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Leave it or put it right?
Replacing windows or a shower screen is not needed for a failed joint. Sound glass and frames normally just need resealing, and we will tell you if that is not the case. Homes in smaller places like Haylands can face more weather, and failed outside joints let damp into walls. Inside, a split seal lets water into floors and panels just as it would anywhere.
Leaving a failed joint normally makes the job bigger, not smaller, as water and mould keep getting in. If you are unsure, call 0345 464 0079 or drop us an email and we will give you an honest view and a quote.
Why us?
- We’re fully insured
- Anti-fungal silicone where joints get wet
- A sealant colour to suit the surroundings
- 4.9 on Google from 180+ five-star reviews
Take a look at what affects the cost and customer reviews.
FAQs for Haylands
Do you work for landlords with property near Ryde St Johns Road station?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. You can phone 0345 464 0079 or email us with the details for a clear quote.
Does living near the coast affect glazing silicone in Haylands?
Near the sea, outside joints face more wind, rain and salt than they would inland, so preparation and the right sealant matter all the more. It’s worth checking the walls that face the sea first.
What guarantee do I get?
Our 12-month guarantee applies to every job we do.
Where do you work from?
We’re based in Crawley, and we work across South East England, London and Scotland.
Do the sealants smell?
That depends on the sealant. Some products have a noticeable smell, others very little.
Is it messy?
No. We work neatly, protect the area around the joints and tidy up afterwards.
Are you insured?
Yes. Mr Mastic is fully insured.
Do you seal glass balustrade bases?
Yes. The sealant joint at the base can be renewed. Fitting glass is a separate trade.
When to call us in Haylands
Glass and frames expand and contract with the temperature, and they don’t move by the same amount. In time, the sealant splits or pulls away.
Look out for these signs:
- Water getting into a conservatory at the joints
- Stained, discoloured glazing silicone
- Glazing silicone that has cracked or come away
- Sealant that was laid over old silicone and failed
For an older house near a landmark such as Church of St. Michael and All Angels, the windows may be timber, sash or later replacements, and each needs the right sealant against the wall.
Questions to ask before booking
- Whether all the old sealant comes out first
- Whether you can choose the colour
- Who does the work, and how experienced they are
- What preparation is included
Landlord and commercial work in Haylands
For anyone letting property in or around Haylands, jobs at different addresses can go on one quote. Send us the addresses and the work at each.
We also work for property managers and facilities teams. We can quote a run of properties together.
What glazing silicone looks like in Haylands
Haylands is close to the coast, where wind-driven rain is a fact of life and, nearer the shore, so is salt air. That is hard on glazing joints and frame seals, especially on the side facing the sea. Compared with the north and west, the South East gets less rain, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.
If you let a flat or house near Ryde St Johns Road station, a shower screen or conservatory joint that leaks is easier to reseal while the property is empty. If you look after a building such as Haylands Primary School, larger buildings have plenty of frames, and the mastic around each one ages.
Haylands is about 1 mile south-west of Ryde, in the Isle of Wight. We provide glazing silicone to homeowners, landlords and businesses in Haylands. Haylands is one of 125 towns and villages in the Isle of Wight we cover for glazing silicone. There’s also a page for Portsmouth, about 8 miles away.
Our applicators cover all of PO33 for glazing silicone. If you need glazing silicone at a property on Play Lane, Pell Lane and Upton Road or anywhere close by, we can help. Close by, we work in Upton (1 mile south-west), Ryde (1 mile north-east), Oakfield (1 mile east), Binstead (1 mile north-west) and Elmfield (1 mile east). We also work in nearby towns such as Newport (6 miles west), Cowes (6 miles north-west), Sandown (4 miles south), Shanklin (6 miles south), Ventnor (9 miles south) and East Cowes (5 miles north-west). For island and remote addresses, a little more planning is needed, so mention it when you ask for a quote.
Around Haylands
Around Haylands, our work takes us to homes and buildings near The Falcon pub, Ryde Academy and Ryde School with Upper Chine. The nearest railway station is Ryde St Johns Road station, roughly 0.9 miles north-east. Nearby you will also find Sandown Castle (4.4 miles south) and Gosport War Memorial Hospital (5.3 miles north). Not far away are Alan Hersey Nature Reserve and Brading Down.
What happens on the day
Every visit runs the same way: we look at the joints together, mask and protect the surrounding surfaces, carry out the job and clear up. It normally takes a few hours for most jobs. For a job in Haylands, we agree the time, the access and parking before the day. Outdoor jobs depend on a dry day, since sealant needs a dry surface.
- First we agree the joints to be done.
- Old sealant is removed from the glass and frame.
- The surfaces are cleaned with a suitable solvent.
- We apply and tool the new silicone.
- We inspect the work and test it where we can.
Before we arrive
- Let us know if you’ve seen damp or leaks
- Keep children and pets away from the work area
- Tell us if parking is tricky
How to get a quote
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is, and email photos if that’s easy.
Advice
When something else is needed
It helps to know what we can’t do:
- Water coming through the roof rather than a sealant joint
- A broken pane or roof panel
- A sagging or failing conservatory roof
Not sure which it is? You can call 0345 464 0079 or send us an email and we’ll tell you honestly.
Surfaces we seal
- Glass-to-frame joints
- Glass-to-glass joints
- Shower screens
- Rooflights
- Conservatory frames
- Glass balustrade bases
What affects the quote in Haylands
Call for a quick quote. The main things that affect it are:
- The old material and how stubborn it is
- The size of the job
- Mould in or behind the old joints
- Access and height
The cost reflects the work involved, not a rough estimate. That’s why we ask about the job first and agree the price before starting.
What to tell us for a quote
The more you tell us, the more accurate the quote. When you ask for a quote, tell us:
- Where the job is, and your postcode
- Any access issues, like height or stairs
- If it’s domestic, commercial or a hotel
- If someone has resealed it before
For a quote, ring 0345 464 0079 or drop us an email with the location and a short description of the problem. You will have a clear quote before any work starts.
Should I try it myself first?
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
