Isle of Wight · England
Haylands External Mastic
Sealing brickwork movement joints, render, cladding and façade joints for householders, landlords and businesses in Haylands. ARBOMaster approved applicators, fully insured, with a one-year guarantee.
- Cracked joints where brick meets render or frames
- Sealant pulling away from one side of the joint
- Water getting into walls through failed joints
External mastic for homes and businesses in Haylands
Low-level joints can normally be done from the ground. For joints higher up, give us some details of the building and we will confirm what access is needed. We work on concrete & block, render & cladding joints and façade panels, and people most often call us about plants rooting in failed movement joints and cracked joints where brick meets render or frames.
Around Haylands, garages, outbuildings and extensions all add to the joints on the outside of a home. Gutter ends, garage door frames and the joints where an extension meets the house are typical spots for leaks.
The work is covered for a year after we finish. If there’s a problem with it, please phone 0345 464 0079 or email us.
- Place
- Haylands (PO33)
- Region
- Isle of Wight
- Cover
- 12 months on all our work
- Quote
- A clear price before we start
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Work for landlords, hotels and businesses
For anyone letting property in or around Haylands, several properties can be quoted together. Just tell us the addresses and what each one needs.
In hotels, rooms out of use cost money, so we plan the work room by room. Hotel work is part of what we do, alongside homes and businesses.
Other services in Haylands
Why act early in Haylands
Done well, a resealed joint is a neat, straight line that suits the wall. A hurried job with smeared edges and no backing looks worse and fails sooner. Around Haylands, water from a failed joint in an older home can soak into timber and plaster, and that is a much bigger job than renewing the sealant.
The cost reflects the work involved, not a rough estimate. That’s why we ask a few questions first and agree the price before starting.
Why book with us
- Neat joints and a tidy finish
- Approved under the ARBOMaster scheme
- Every job guaranteed for a year
- Fully insured
Take a look at how sealant jobs are priced and customer reviews.
Do you need external mastic in Haylands?
Some movement joints have been pointed up with mortar by mistake. With the joint locked solid, the movement turns into cracks elsewhere in the wall.
Common reasons people contact us include:
- Movement joints filled with mortar instead of sealant
- Joints with sealant missing in places
- Water getting into walls through failed joints
- Leaking joints around cladding and façade panels
Managing a site like Haylands Primary School? Then movement joints, cladding joints and gutters on larger buildings need the same care as a house’s.
Comparing quotes
- How long to leave it before use
- What insurance they hold
- How much experience the applicator has
- How hidden problems are handled
Different surfaces, different methods
Joints between dissimilar materials
Wherever two materials meet, they move differently. We seal the joint with a flexible exterior sealant so the movement is taken up.
Cladding and façade panels
Panel systems often rely on sealant between and around the panels. Each joint gets a sealant that suits the panel and its movement.
Aftercare tips
To keep the joints looking good and working properly:
- Have failed joints looked at early
- Keep water from gutters off the wall
- Look over the joints every year, ideally after winter
- Wash walls gently around the sealant
Keep the joints clear of soil, plants and climbing growth. Anything that holds water against the joint wears it out sooner.
Gaps, plants or missing sealant in a joint are worth getting looked at. Earlier resealing means a smaller job and a better result.
Walls and rooflines in Haylands
Haylands is within about 2 miles of the coast, where wind-driven rain is a fact of life and, nearer the shore, so is salt air. Both are hard on movement joints and outside wall joints, which can dry out and crack sooner where a building faces the weather. Historic houses like Nunwell House (about 2.5 miles south) are a reminder that the area around Haylands has older buildings as well as new. Where a home is older, older walls and rooflines need a sealant that moves with them and suits the material.
Rented homes near Ryde St Johns Road station change hands often, and outside joints that have cracked can let damp into a rental, so check them between lets. For an older house near a landmark such as Church of St. Michael and All Angels, the joints between older walls, newer extensions and the roofline need a sealant that can move.
Haylands is about 1 mile south-west of Ryde, in the Isle of Wight. Anywhere in PO33, we cover external mastic for homes and businesses. Our the Isle of Wight coverage runs to 125 places, Haylands among them. Portsmouth is on our list too, around 8 miles away.
Work in PO33 works the same way as everywhere else we cover. If you need external mastic at a property on Play Lane, Pell Lane and Upton Road or anywhere close by, our applicators can take on the job. Neighbouring places we cover for external mastic include Upton (1 mile south-west), Ryde (1 mile north-east), Oakfield (1 mile east), Binstead (1 mile north-west) and Elmfield (1 mile east). Within a short drive, we also cover Newport (6 miles west), Cowes (6 miles north-west), Sandown (4 miles south), Shanklin (6 miles south), Ventnor (9 miles south) and East Cowes (5 miles north-west). Island and remote addresses take a little more planning, so tell us where you are when you ask for a quote.
What’s near Haylands
Locally, jobs take us to homes and businesses close to The Falcon pub, Ryde Academy and Ryde School with Upper Chine, among other places. Haylands’s nearest station is Ryde St Johns Road station, about 0.9 miles north-east. A little further out are Sandown Castle (4.4 miles south) and Gosport War Memorial Hospital (5.3 miles north). Open spaces near Haylands include Alan Hersey Nature Reserve and Brading Down.
What happens on the day
The work is kept neat and contained to the area we are working on, so you can get on with your day. Expect the work to take anything from a few hours to several days, depending on the building, and we explain the cure time before we leave. Parking around Haylands is usually easier than in a town centre, but mention any lanes, gates or long drives. If the job is outside, tell us about side access and how high the joints are.
- We look at every joint and agree a colour to suit the wall.
- We take out the old sealant until the faces are sound.
- Closed-cell backing rod is pushed in so the sealant bonds to two sides only.
- We prime the faces where required.
- We gun in low-modulus sealant and tool it neatly.
Getting ready for the visit
- Let us know about earlier repairs to the joints
- Tell us if parking is tricky
- Move anything stored near the joints
How to get a quote
Getting a quote is simple: let us know what needs doing and where, and roughly how big it is. A few photos by email make the job easier to understand.
Advice
Common questions in Haylands
Does living near the coast affect external mastic in Haylands?
Near the coast, wind-driven rain and, nearer the shore, salt air make outside sealant work harder. Choosing the right sealant for the frame and wall, laid at the right depth, helps it last.
Can you help a landlord with a rental near Ryde St Johns Road station?
Yes, landlords and agents are among the people we work for. Just phone 0345 464 0079 or email us with the address and what needs doing, and we will send you a clear quote.
Do you do commercial work?
Yes, regularly. We can plan bigger jobs in stages to suit the site.
Can you do several jobs on one visit?
Yes, we can. Several rooms, windows or areas can go on one quote.
Will you leave a mess?
No. The area is protected while we work and cleaned up afterwards.
Can you seal joints between render and window frames?
Yes. Joints between dissimilar materials are a big part of external work. The sealant is chosen to bond to both sides, primed where needed.
Why do you put foam in the joint first?
That’s backing rod, a closed-cell foam. It stops the sealant going in too deep and bonding to three sides, which would stop it stretching.
Are you an approved applicator?
Yes. Mr Mastic is an ARBOMaster approved applicator, and we’re fully insured.
Should I try it myself first?
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.