Surrey · England

Gatton Glazing Silicone

Specialist glazing silicone for Gatton: careful preparation, the right product and tidy work. Call for a quick quote.

  • Leaks from the base of a shower screen
  • Failed joints on frameless glass
  • Water getting into a conservatory at the joints

Glazing silicone for Gatton homes and businesses

Glazing silicone in Gatton

Glass, frames and walls all move at different rates, and the silicone between them takes the strain. Once it splits or comes away, water finds a way through. We cut it out and reseal with a glazing silicone suited to the joint. We work on glass balustrade bases, glass-to-glass joints and conservatory frames, and the jobs we see most are rooflight joints letting water in and leaks from the base of a shower screen.

Around Gatton, many homes face open ground, so their windows and doors take the full weather. Exposed frames and sills lose their mastic sooner than sheltered ones.

Our work is backed for twelve months, in Gatton and everywhere else we cover.

Location
Gatton (RH2, RH1)
Region
Surrey
Cover
12 months on all our work
Quote
A clear quote up front
Telephone
0345 464 0079
Last updated
26 October 2026
Outdoor mastic being applied where a white frame meets red brickwork, below the fascia and gutter

How to look after the new joints

Simple care keeps the joints in good condition. Our advice:

  • Clear the conservatory gutters regularly
  • Wipe the screen down after showering
  • Use a gentle glass cleaner and a soft cloth
  • Act on drips or damp patches early

Clear the conservatory gutters regularly so water does not back up against the seals. Overflowing gutters can cause leaks of their own.

Shower screen leaks can go unnoticed. It can damage the floor or the ceiling below long before you see it.

Do you need glazing silicone in Gatton?

Some conservatory leaks aren’t sealant at all: broken panels, roof problems and blocked gutters can all let water in. That is why we trace the leak first.

Most people get in touch when they notice one of these:

  • Stained, discoloured glazing silicone
  • Water running down inside the glass
  • Split or lifting silicone on glass
  • Water escaping where a screen meets the wall

In the older streets around St Andrew's Church, the windows may be timber, sash or later replacements, and each needs the right sealant against the wall.

Before booking anyone

  • What product goes in the joint
  • The length of the guarantee
  • When the joint can take water or movement
  • Is VAT in the price?

10 questions to ask before booking

Landlord and commercial work in Gatton

Mouldy or split sealant often shows up at the end of a tenancy. Several properties can go on one quote.

Whether it’s one flat or a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.

Should I try it myself first?

Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.

Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and does not move well, and getting the depth right matters as much as the look.

What the job involves on each surface

Glass-to-frame joints

We cut the old silicone from the glass without scratching it and reseal with glazing silicone.

Conservatory frames

Frame joints face sun and rain all year. Renewed sealant keeps water out.

The process

Every visit runs the same way: we check the joints, mask and protect the surrounding surfaces, do the work and clear up. Most jobs take a few hours, depending on how many joints need doing. Somewhere as small as Gatton, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.

  1. We look at the glazing and agree which joints need resealing.
  2. We cut away the failed silicone.
  3. We clean and prepare the joint.
  4. We apply and tool the new silicone.
  5. We inspect the work and test it where we can.

Preparing for the visit

  • Where the joints are inside, avoid wetting them before we arrive
  • Mention any tricky access
  • Clear items away from the joints we’re working on

Ask for a quote

If you’re in Gatton and need glazing silicone, ring 0345 464 0079 or send us an email. A short description of the job and where it is helps us quote, and you will get a clear quote before work begins.

Ask for a quote

Advice

What affects the cost of glazing silicone

We do not publish a price list, because jobs vary so much. The quote depends on:

  • How much old sealant there is and how hard it is to remove
  • Which sealant suits the joint
  • How many rooms, windows or areas are involved
  • How easy the joints are to reach

Homes and businesses are quoted the same way: the amount of work, the access and the products needed, along with when we can work on site. Call for a quick quote and we’ll go through it with you.

What to tell us for a quote

A few details help us give you an accurate quote. When you get in contact, it helps to mention:

  • If someone has resealed it before
  • A few pictures by email, if you can
  • Whether it’s a home or a business
  • The rough size of the job

There’s no standard price list, because every job is different. Instead, your job gets its own clear quote. To get started, call 0345 464 0079 or drop us an email.

Gatton homes and the weather

Rainfall in the South East is lower than in much of the UK, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day.

Managing a site like Lime Tree Primary School? Then the mastic around its windows and doors needs looking after like any other building’s. Letting a property close to Merstham station? Then leaking glazing joints, shower screens or conservatory seals are worth sorting between tenancies.

Gatton is about 2 miles north of Redhill, in Surrey. Wherever you are in the RH2 postcode area, we cover glazing silicone for homes and businesses. Across Surrey, we cover 395 places, and Gatton is one of them. You can also see our page for Crawley, about 11 miles away.

We work across RH2 and RH1 for glazing silicone and the streets around it. Streets in the area include Rocky Lane and Gatton Bottom, and we cover them all. We also cover the places around Gatton: South Merstham (1 mile east), Holmethorpe (1 mile south-east), Merstham (1 mile north-east), Mugswell (1 mile north-west) and Redhill (2 miles south). Larger places within reach include Epsom (7 miles north-west), Horley (6 miles south), Ewell (7 miles north-west), Walton-on-Thames (13 miles north-west), Caterham (4 miles north-east) and Dorking (7 miles west).

Landmarks near Gatton

Typical jobs here are in homes near East Surrey College, Nutfield Marshes and St Bede's School and the streets around them. Gatton’s nearest station is Merstham station, about 1 mile east. Well-known places in the area include East Surrey Hospital (3.1 miles south) and The Belfry (1.6 miles south). The countryside around Gatton includes Colley Hill and Mercers Lake.

Map of Gatton © OpenStreetMap contributors

FAQs for Gatton

Will you come out to Gatton?

Yes. Gatton is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.

Do you cover Gatton for glazing silicone?

Yes, Gatton is within the area we cover. Our work covers London and the South East. You can ring 0345 464 0079 or drop us an email and let us know what needs doing.

Will there be a smell?

There can be a smell while the sealant cures, which fades as it sets. Opening a window helps.

Are you insured?

Yes. We are fully insured for every job we do.

Will you leave a mess?

Very little: the area around the joints is protected first, and we tidy up before we go.

Which silicone is used for glass joints?

We pick a glazing silicone to suit the materials. Neutral-cure silicone is the usual choice.

Should I try DIY first?

For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.

Do I need to be at home?

If the work is inside, we need someone to let us in. After that, you can carry on with your day.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job