Hampshire · England
Glazing Silicone in Ellisfield
Glazing silicone for Ellisfield, by sealant specialists with 20+ years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Sealant that was laid over old silicone and failed
- Leaking glazing joints on a rooflight
- Cracked silicone between glass panels
Looking after it afterwards
To keep the joints looking good and working properly:
- Squeegee the shower screen after each use
- Keep scrapers and blades away from the silicone
- Keep harsh solvents off the silicone
- Inspect the sealant on glazing annually
Look over the glazing joints every year or so. Catching a split early keeps the repair small.
Do not leave lifting or mouldy silicone on glazing. Peeling silicone lets water in behind and the leak gets worse.
Glazing silicone in Ellisfield
We work across Ellisfield on glazing joints for homes and businesses. From conservatories to shower screens, it’s the same careful method, with a sealant chosen for the joint. We work on rooflights, glass balustrade bases and glass-to-frame joints, and the jobs we see most are black or yellowed silicone on glass joints and water escaping where a screen meets the wall.
Around Ellisfield, many homes face open ground, so their windows and doors take the full weather. Exposed frames and sills lose their mastic sooner than sheltered ones.
All our work comes with a 12-month guarantee, wherever you are in Hampshire.
- Place
- Ellisfield (RG25)
- Region
- Hampshire
- Cover
- A year, on every job
- Quotes
- A clear quote up front
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Different surfaces, different methods
Glass balustrade bases
Balustrade bases are exposed outdoors. Renewing the sealant keeps water out of the channel.
Glass-to-glass joints
You see these joints clearly, so a straight, even finish matters.
The process
Our applicators work methodically: protection first, then preparation, sealing and a tidy-up. Typically it takes a few hours, depending on how many joints need doing and we leave things clean and tidy. For a village or hamlet like Ellisfield, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- First we agree the joints to be done.
- We cut away the failed silicone.
- The surfaces are cleaned with a suitable solvent.
- New glazing silicone goes in and is finished neatly.
- We inspect the work and test it where we can.
How to prepare
- Tell us about any previous sealing or DIY attempts
- For indoor joints, keep the area dry beforehand if you can
- Clear the area around the work
Getting a quote
Asking for a quote is easy: let us know the job and the location and its rough size. Photos by email help us understand the job, and we’ll come back to you with a quote.
Related advice
What we can’t put right
We won’t take on work that won’t last, so here’s what sealant can’t put right:
- A sagging or failing conservatory roof
- Failed flashing around a conservatory
- Glass that needs replacing
If you’re not sure, just call 0345 464 0079 or drop us an email and we’ll give you a straight answer before booking.
Surfaces we seal
- Glass-to-frame joints
- Shower screens
- Conservatory frames
- Glass balustrade bases
- Rooflights
- Glass-to-glass joints
Glazing silicone in Ellisfield: local notes
With historic houses such as Hall Place (about 3.9 miles south) nearby, there’s older building stock in the area around Ellisfield as well as newer homes. In older buildings, older frames set in brick or stone need a sealant that suits them, and sometimes that’s traditional sand mastic. The South East is one of the drier parts of the UK, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.
Rented homes near Basingstoke station change hands often, and a shower screen or conservatory joint that leaks is easier to reseal while the property is empty. In the older streets around Church of St. Martin, replacement windows fitted into old openings often leave uneven gaps that need backing and a flexible joint.
Ellisfield is about 4 miles south of Basingstoke, in Hampshire. Our applicators cover glazing silicone for householders, landlords and businesses in Ellisfield, as part of our work across Hampshire. Our Hampshire coverage runs to 683 places, and Ellisfield is one of them. For nearby work, see our Reading page.
Postcode districts we cover here for glazing silicone: RG25. You’ll find streets such as Church Lane, Furzen Lane and College Lane, and we cover them all. Other places close to Ellisfield include Upper Common (1 mile south-west), Nashes Green (2 miles east), Cliddesden (2 miles north), Viables (3 miles north) and Upton Grey (4 miles east). Further out, we also cover Basingstoke (4 miles north), Winchester (14 miles south-west), Farnborough (15 miles north-east), Fleet (12 miles north-east), Aldershot (14 miles east) and Alton (6 miles south-east).
Around Ellisfield
Around Ellisfield, our work takes us to homes and buildings near The Fox pub, among other places. The closest station to Ellisfield is Basingstoke station, roughly 4.2 miles north of the centre. A little further out are Basingstoke and North Hampshire Hospital (5.1 miles north) and Basing House (4.4 miles north). The countryside around Ellisfield includes The Mill Field and Farleigh Hill.
Also near Ellisfield
What else we do in Ellisfield
Your questions about glazing silicone in Ellisfield
Do you cover smaller places like Ellisfield?
Yes, smaller places are covered as well as towns. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
I let a flat near Basingstoke station. Can you help?
Yes, we work for landlords and agents. You can call 0345 464 0079 or send us an email with the address and a few details, and we’ll give you a fixed price before work begins.
What sealant do you use?
It depends on the joint: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. We use products from Arbo and Everbuild.
What information do you need?
Only a few details: the address or postcode, what’s wrong and any access issues. Then call 0345 464 0079 or email us.
How much does glazing silicone cost in Ellisfield?
Every job is different, so each one gets its own quote. For a quick quote, ring 0345 464 0079 or drop us an email and let us know what needs doing and where.
Will resealing stop my conservatory leaking?
In many cases, as long as sealant is the cause. We find where the water gets in first, so you know what you are paying for.
Where are you based?
We are based in Crawley, West Sussex, and we cover South East England, London and all of Scotland.
Do I have to be there?
That depends on where the joints are. For work indoors, someone needs to let us in, and for outside work we’ll agree access with you when we book.
Landlord and commercial work in Ellisfield
Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance.
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
DIY sealant or a professional job?
If you are set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it doesn’t work out, we can still put it right.
The biggest DIY mistake is sealing over old sealant. New silicone won’t bond to old, so it lifts and traps water and mould underneath. Everything old must be removed first.
How we quote for glazing silicone
We don’t publish a price list, because jobs vary so much. What we look at:
- The type of sealant required
- The number of rooms or windows
- When we can work, for business premises
- Whether the work is at height
Every job is a little different, so each one gets its own quote. Size, access and the product the joint needs all play a part, and we’ll explain the quote if you ask.
What to tell us for a quote
You don’t need to know the technical terms. It helps if you can tell us:
- Access, such as stairs, a lift or height
- What’s wrong with the joints now
- Where the job is, and your postcode
- Pictures of the joints, sent by email
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and add pictures by email if you can.