Hampshire · England
Ellingham Glazing Silicone
Specialist glazing silicone for Ellingham: careful preparation, the right product and tidy work. Ask us for a quick quote.
- Rooflight joints letting water in
- Glazing silicone that has cracked or come away
- Drips on the inside of a conservatory window
Glazing silicone for homes and businesses in Ellingham
Many conservatory leaks come down to failed sealant at the glass-to-frame or frame-to-wall joints. We trace the leak to the joint and reseal it, and if it’s something sealant cannot fix, we’ll tell you. Common call-outs are for new silicone smeared over old sealant and failed sealant around rooflight glass, across glass-to-glass joints, glass-to-frame joints and rooflights.
Somewhere as small as Ellingham, older homes often have timber frames set in stone or brickwork. Not every older frame suits a modern silicone bead, and sometimes a traditional sand mastic is the better choice.
Whatever the size of the job, it’s backed by our one-year guarantee in Ellingham and across Hampshire.
- Where
- Ellingham (BH24)
- Wider area
- Hampshire
- Guarantee
- 12 months on all our work
- Price
- Quoted before any work starts
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Do you need glazing silicone in Ellingham?
Dirt and grease stop silicone sticking. Where the joint wasn’t cleaned and degreased the sealant may lift within a few years.
Common reasons people contact us are:
- Black or yellowed silicone on glass joints
- Leaks where conservatory glass meets the frame
- Cracked silicone between glass panels
- Drips on the inside of a conservatory window
Managing a site like Ringwood School Academy? Then the mastic around its windows and doors needs looking after like any other building’s.
Before booking anyone
- What happens if they find a problem under the old sealant
- How long the guarantee is
- Who turns up on the day
- How the joint is cleaned and prepared
Why act early in Ellingham
A quick bead over the old sealant might stop a drip for a while, but new silicone will not bond to old, and the leak usually returns. Cutting out and resealing properly lasts. Where a wall is exposed, as many are in small places like Ellingham, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
Combining jobs into one visit generally makes better use of the time than several visits. You’ll get one clear quote for the whole job.
Why choose Mr Mastic in Ellingham
- 12-month guarantee on every job
- Arbo and Everbuild products
- Any old sealant cut out fully, not covered over
- Homes, businesses and hotels
See our cost guide and our reviews.
What affects the cost of glazing silicone
You will get a clear quote before any work starts. It takes into account:
- Whether old sealant or filler has to be cut out
- The product the joint needs
- The number and length of the joints
- When we can work, for business premises
A failed joint rarely gets cheaper to fix by waiting, as water and mould keep getting in. If you’re unsure, ring 0345 464 0079 or send us an email and we’ll give you an honest view and a quote.
What to tell us for a quote
A few details help us give you an accurate quote. When you get in contact, it helps to mention:
- Pictures of the joints, sent by email
- Where the job is, and your postcode
- What the problem is, such as mould, gaps, leaks or cracking
- Roughly how big the job is
Every job is quoted individually, so the first step is telling us about yours. Just call 0345 464 0079 or send us an email with the details and send photos if you have them.
How the visit works
On the day, there’s very little for you to do. Point us to the joints and we will get on with it. The job generally takes anything from an hour or two to most of a day, depending on the size of the job from start to finish. Somewhere as small as Ellingham, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- We look at the glazing and agree which joints need resealing.
- We cut away the failed silicone.
- The surfaces are cleaned with a suitable solvent.
- New glazing silicone goes in and is finished neatly.
- We inspect the work and test it where we can.
How to prepare
- Tell us about any previous sealing or DIY attempts
- Clear items away from the joints we are working on
- On commercial sites, let us know about site rules
Ask for a quote
Getting a quote is simple: let us know what needs doing and where, and roughly how big it is. Photos by email help us understand the job.
Read more
What glazing silicone looks like in Ellingham
London and the South East are among the drier parts of the UK, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.
For an older house near a landmark such as Church of St Mary and All Saints, the joint between an old wall and a newer frame is generally the first place rain gets in.
Ellingham is in Hampshire. Ellingham gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. Across Hampshire, we cover 683 places, and Ellingham is one of them. There’s also a page for Southampton, about 18 miles away.
Here we cover the BH24 postcode area for glazing silicone. Close by, we work in Blashford (1 mile south-east), Ibsley (1 mile north-east), Rockford (1 mile east), Harbridge (1 mile north) and Mockbeggar (1 mile north-east). Further out, we also cover Totton (13 miles east), Lymington (13 miles south-east), New Milton (10 miles south-east), Barton on Sea (11 miles south-east), Marchwood (15 miles east) and Ashley (10 miles south-east).
Local landmarks in Ellingham
Around Ellingham, our work takes us to homes and buildings near The Old Beams Inn. Nearby you’ll also find Fordingbridge Doll Museum (3.8 miles north) and St Leonard's Hospital (4.6 miles south-west). The countryside around Ellingham includes Linbrook Lake and Blashford Lakes.
When something else is needed
A few problems are outside what sealant work can do:
- Failed flashing around a conservatory
- A broken pane or roof panel
- Condensation trapped between two panes
If you’re not sure, just phone 0345 464 0079 or send us an email and we will give you a straight answer.
Where we work in Ellingham
- Conservatory frames
- Rooflights
- Glass balustrade bases
- Glass-to-frame joints
- Glass-to-glass joints
- Shower screens
Also in Ellingham
Ellingham: your questions answered
Do you cover Ellingham for glazing silicone?
Yes. We work across London and the South East, and Ellingham is part of that. Just ring 0345 464 0079 or send us an email with a few details of the job.
Is there a guarantee on glazing silicone in Ellingham?
All our work, in Ellingham and everywhere else, comes with a 12-month guarantee. We’re also fully insured and ARBOMaster approved.
Can you work on commercial sites?
Yes. We have worked for hotels, offices and other businesses, and we’re fully insured.
Do I need to be at home?
Access is agreed with you when the job is booked. For inside work, that normally means someone being in.
Can you match the sealant colour?
We help you choose a colour that suits, from white and clear to greys and other shades. The choice depends on the product the joint needs.
I’m a tenant. Can you help?
Yes. Check with your landlord; we can send the quote to them too.
Is it messy?
No. We work neatly, protect the area around the joints and tidy up afterwards.
Do you replace glass?
No. A misted unit has failed inside, and a glazier needs to replace it.
How to look after the new joints
After the cure time, these simple habits help:
- Use gentle products around the joints
- Keep air moving in the conservatory
- Do not use a blade near the sealant
- Act on drips or damp patches early
Clear the conservatory gutters regularly so water does not back up against the seals. Blocked gutters can push water where it shouldn’t go.
Shower screen leaks can go unnoticed. It can damage the floor or the ceiling below long before you see it.
Should I try it myself first?
Sealing over old silicone is the commonest DIY error. New silicone won’t bond to old, so it peels away and traps moisture behind it. All the old material has to come out first.
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.