Hampshire · England
Ellingham Gutter Sealing
Sealing leaking gutter joints, end caps, fascias, soffits and roofline trims for homes and businesses in Ellingham and across Hampshire. ARBOMaster approved applicators, fully insured, with a one-year guarantee.
- Dripping gutter ends
- Drips from gutter joints and end caps
- Damp on an inside wall under a dripping gutter
Gutter sealing in Ellingham: local notes
The South East is one of the drier parts of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.
For an older house near a landmark such as Church of St Mary and All Saints, an extension built onto an older house moves differently, and the joint between them takes the strain. Schools such as Ringwood School Academy are buildings too, and larger buildings have long runs of movement joint that eventually need resealing.
Ellingham is in Hampshire. Anywhere in BH24, we cover gutter sealing for homes and businesses. Ellingham is one of 683 towns and villages in Hampshire we cover for gutter sealing. Our Southampton page covers work nearby.
Postcode districts we cover here for gutter sealing: BH24. We also cover the places around Ellingham: Blashford (1 mile south-east), Ibsley (1 mile north-east), Rockford (1 mile east), Harbridge (1 mile north) and Mockbeggar (1 mile north-east). We also work in nearby towns such as Totton (13 miles east), Lymington (13 miles south-east), New Milton (10 miles south-east), Barton on Sea (11 miles south-east), Marchwood (15 miles east) and Ashley (10 miles south-east).
Landmarks near Ellingham
We work in homes and buildings around The Old Beams Inn and the streets around them. A little further out are Fordingbridge Doll Museum (3.8 miles north) and St Leonard's Hospital (4.6 miles south-west). For a walk, there’s Linbrook Lake and Blashford Lakes.
About our gutter sealing in Ellingham
A leaking gutter joint marks the wall and wets the ground underneath. Resealing the joint is often all it needs, as long as the gutter is sound. Typical jobs include gaps along fascia and soffit joints and old gutter sealant that has let go, across uPVC fascias, soffit joints and gutter end caps.
Outside joints can only be sealed when they’re dry, so work in Ellingham is booked around the forecast. Tell us about access to all sides of the building, including outbuildings and garages.
There’s a 12-month guarantee on every job, large or small.
- Place
- Ellingham (BH24)
- Region
- Hampshire
- Guarantee
- One year on every job
- Price
- A clear price before any work starts
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
How to look after the new joints
How long the joints last depends on use and care. We suggest:
- Rest ladders on the wall, not the gutter
- Watch for drips in a downpour
- Keep an eye out for wet patches below a joint
- Deal with a drip before winter
Make sure downpipes are not blocked so the gutter can drain. Blockages push water back along the gutter.
A leaking garage frame lets water reach stored items. A reseal sorts it.
Ellingham questions
Is Ellingham within the area you cover?
Yes, smaller places are covered as well as towns. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Is gutter sealing in Ellingham guaranteed?
Every job comes with our 12-month guarantee, wherever it is. We are also fully insured and ARBOMaster approved.
Will there be a smell?
Possibly a little. It fades as the sealant cures, and ventilation helps.
Are you ARBOMaster approved?
Yes. Mr Mastic is an ARBOMaster approved applicator and we are fully insured too.
Can I do it myself?
Some simple jobs can be done by a careful DIYer. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
Do you work for letting agents?
Yes, we do. Domestic, commercial and hotel work are all part of what we do, and we’re fully insured.
How long before the joint can be used?
Most sealants are touch-dry well before they’re fully cured. We’ll give you the cure time for the product we used.
What should I tell you?
The location, the problem and the rough size of the job. If you can, email a few pictures.
Why deal with it now?
You do not need new fascias just because the joints have opened. Sealing the joints tidies them up if the boards are sound. Where a wall is exposed, as many are in small places like Ellingham, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
A few things move the cost up or down: how much old sealant there is and how stubborn it is, any mould to treat, and whether we need extra access for height. Your quote takes all of that into account.
Why book with us
- Trusted Arbo and Everbuild sealants
- Sanitary silicone with an anti-fungal additive in wet areas
- More than 20 years in sealant work
- You choose the colour before work begins
See what affects the cost or our reviews.
Different surfaces, different methods
uPVC fascias
Fascia board joints can open up. They’re sealed tidily with a matching sealant where possible.
Garage door frames
A fresh seal around the frame stops rain getting in.
Also in Ellingham
What affects the cost of gutter sealing
There’s no set price list, because jobs vary so much. The quote depends on:
- The old material and how stubborn it is
- How many areas need sealing
- Mould in or behind the old joints
- The size of the job
Instead of a standard rate, we look at what your job involves: the amount of work, the old material and the access. You’ll know the price before we begin.
What to tell us for a quote
Before you ask for a quote, have a think about:
- What the problem is, such as mould, gaps, leaks or cracking
- If it’s domestic, commercial or a hotel
- Photos by email, if that is easy
- How we’d reach the joints
There’s no standard price list, as no two jobs are quite the same. Instead, we send you a clear quote for your job. To get started, phone 0345 464 0079 or email us.
Can I do it myself?
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
A DIY attempt does not rule out a professional job. We cut it out and start again, so just mention it when you contact us.
How it works
A visit follows a simple pattern: we look at the joints together, protect the area around them, do the work and tidy away. Most jobs take an hour or two for a few joints, longer for a full run. In a small place like Ellingham, access is generally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- We find where the water is coming from and check the gutter is sound.
- We remove the old sealant and clean the joint.
- The joint is dried before sealing.
- We seal the joint with a sealant made for gutters.
- The gutter is checked and debris around the joints cleared.
How to prepare
- Mention any parking rules near the property
- Where the joints are inside, avoid wetting them before we arrive
- Tell us about access, such as stairs, a lift or high-level joints
Getting a quote
Every job is quoted individually, so start by telling us what you need. Just call 0345 464 0079 or send us an email with the details and send pictures if you have them.
Read more
Work for landlords, hotels and businesses
Failed sealant is one of the commonest items on a check-out report, and it’s easy to sort out between tenants. We can quote for more than one property at once.
We also work for property managers and facilities teams. Several sites can be quoted together.