Essex · England

Chase Cross Glazing Silicone

Glazing joints in Chase Cross need attention? We remove the old material, prepare the joints and seal them properly, and the work is guaranteed for a year.

  • Leaking glazing joints on a rooflight
  • New silicone smeared over old sealant
  • Failed joints on frameless glass

Trusted glazing silicone in Chase Cross

Glazing silicone for homes and businesses in Chase Cross

Not every silicone suits glass. We use a neutral-cure glazing silicone that is suited to glass and the frame, and we tool it to a neat, even finish. If you have split or lifting silicone on glass and water escaping where a screen meets the wall, we can put it right, whatever the surface.

Houses in smaller places like Chase Cross can stand more in the open than those in a built-up town. The mastic around frames on those walls tends to age faster.

Each job carries a 12-month guarantee, whatever its size.

Mr Mastic applicator sealing the top of a white uPVC door frame on a red-brick house
Where
Chase Cross (RM5, RM1, RM4)
Wider area
Essex
Cover
12 months on all our work
Quotes
A clear price before we start
Phone
0345 464 0079
Page updated
26 October 2026

What affects the cost of glazing silicone

You will get a clear quote before any work starts. It’s based on:

  • The number of rooms or windows
  • Whether old sealant or filler has to be cut out
  • Any working-time requirements on site
  • Whether the work is at height

Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, any mould to treat, and whether the work is at height. We take all of that into account in your quote.

Helping us quote

Photos help, but a description is a good start. Try to tell us:

  • Access, such as stairs, a lift or height
  • Whether it has been sealed before
  • What’s wrong with the joints now
  • Where the job is, and your postcode

Asking for a quote is easy: let us know the job and the location. A few pictures by email make the job easier to understand.

The process

Most of a good job is in the preparation, so that’s where we spend the time. Joints are cleaned back and dried before anything new goes in. In total, it normally takes a few hours, depending on how many joints need doing. For a job in Chase Cross, we agree the time, the access and parking before the day. If the work is outside, the weather plays a part, as sealant needs a dry surface.

  1. We start by finding the leak and making sure sealant is the cause.
  2. We cut out the failed silicone, taking care of the glass and frame.
  3. We clean the joint with a solvent that suits the glass and frame.
  4. We apply a neutral-cure glazing silicone and tool it smooth.
  5. We look over every joint and, where we can, test it with water.

Getting ready for the visit

  • Clear items away from the joints we are working on
  • Mention any parking rules near the property
  • Let us know about stairs, lifts or work at height

Ask for a quote

For glazing silicone in Chase Cross, ring 0345 464 0079 or email us. Tell us what the problem is and where, and you will get a clear quote before we start.

Get a price

Advice

What we’re called out for in Chase Cross

Silicone will not bond to a dirty surface. If the glass and frame weren’t cleaned properly the sealant may lift within a few years.

Most people get in touch after spotting something like this:

  • Rooflight joints letting water in
  • Cracked silicone between glass panels
  • Sealant that was laid over old silicone and failed
  • Conservatory leaks at frame and glazing joints

For landlords with property near Gidea Park station, glazing joints are worth checking at the end of a tenancy, before a small leak grows.

Before booking anyone

  • How the colour is chosen
  • What the quote includes, VAT included or not
  • How hidden problems are handled
  • Which sealant they’ll use, and why

Our hiring checklist

Windows and doors in Chase Cross

With historic houses such as Hare Hall (about 2 miles south-east) nearby, there’s older building stock in the area around Chase Cross as well as newer homes. In older buildings, older timber frames in brick or stone need a different approach from a modern uPVC window. Compared with the north and west, the South East gets less rain, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day.

For site and facilities teams at buildings such as Bower Park Academy, the mastic around its windows and doors needs looking after like any other building’s. For an older house near a landmark such as St James, the joint between an old wall and a newer frame is usually the first place rain gets in.

Chase Cross is about 2 miles north of Romford, in Essex. We provide glazing silicone to homes and businesses in Chase Cross, as part of our work across Essex. We cover 644 towns and villages across Essex, from the larger towns to small villages. London is on our list too, around 14 miles away.

We cover every part of RM5, RM1 and RM4 for glazing silicone. If you need glazing silicone at a property on Merlin Road, Avelon Road and Vernon Road or anywhere close by, our applicators can take on the job. Neighbouring places we cover for glazing silicone include Havering-atte-Bower (1 mile north-east), Redbridge (2 miles west), Stapleford Abbotts (2 miles north), Lambourne End (3 miles north-west) and Chigwell Row (3 miles west). We also work in nearby towns such as Basildon (12 miles east), Harlow (12 miles north), Brentwood (6 miles east), Billericay (11 miles east), Loughton (6 miles north-west) and Wickford (15 miles east).

Around Chase Cross

Typical jobs here are in homes near Colley Rowe Inn, Clockhouse Primary School and Havering Country Park, among other places. The closest station to Chase Cross is Gidea Park station, about 2.1 miles south-east of the centre. A little further out are Romford Shopping Hall (1.8 miles south) and Harold Wood Hospital (2.3 miles south-east). For a walk, there’s Bedfords Park.

Map of Chase Cross © OpenStreetMap contributors

Your questions about glazing silicone in Chase Cross

Do you work for landlords with property near Gidea Park station?

Yes, we work for landlords and letting agents. You can phone 0345 464 0079 or send us an email with the address and a few details, and we will give you a fixed price before any work starts.

Do you cover smaller places like Chase Cross?

Yes, Chase Cross is covered. We work across London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.

Do the sealants smell?

That depends on the sealant. Some smell for a while, some hardly at all, and any smell fades as they cure.

How long will you be here?

Typically it takes a few hours, depending on how many joints need doing. Bigger jobs take longer, and we will say how long yours will take.

Why not top up the existing silicone?

It doesn’t last. Fresh silicone will not bond to cured silicone so we take it all out and start clean.

Will you leave a mess?

Tidy work is part of the job. Nearby surfaces are protected, and we clear up when we are done.

Are you an approved applicator?

Yes. We hold ARBOMaster approved applicator status.

Which products do you use?

We choose the sealant for the joint, not the other way round. Movement, water and weather all affect the choice.

Work for landlords, hotels and businesses

Mouldy or split sealant often shows up at the end of a tenancy, and it’s easy to sort out between tenants. Several properties can be quoted together.

We work for landlords and agents as well as householders. Sealant work between tenants keeps a property looking cared for before the next move-in.

Should I try it myself first?

Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and does not move well, and getting the depth right matters as much as the look.

If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.

What we cannot put right

Sealant isn’t the answer to every problem, and we’d rather say so up front. It won’t solve:

  • A sagging or failing conservatory roof
  • Misting between the panes of a double-glazed unit (a failed unit for a glazier)
  • A frame that needs repairing or replacing

Not sure which it is? You can phone 0345 464 0079 or send us an email and we’ll tell you honestly.

Where we work in Chase Cross

  • Glass balustrade bases
  • Conservatory frames
  • Glass-to-frame joints
  • Glass-to-glass joints
  • Rooflights
  • Shower screens

Aftercare tips

No joint lasts for ever, but care makes a real difference. Our tips:

  • Get a new leak looked at quickly
  • Run a squeegee over the glass when you are done
  • Use gentle products around the joints
  • Inspect the sealant on glazing annually

On shower screens, wipe or squeegee after use and keep the room ventilated. It helps stop mould getting into the silicone.

Act on black or lifting silicone early. Peeling silicone lets water in behind and the leak gets worse.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job