Essex · England
Fire-rated sealant in Chase Cross, Essex
Fire rated sealant for Chase Cross and the surrounding area: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.
- Gaps left after a refit or conversion
- Open gaps behind door architraves
- Gaps filled with a product that is not fire-rated
How to look after the new joints
How long the joints last depends on use and care. Here’s what we suggest:
- Store the list of sealed gaps with your building paperwork
- Never patch a fire seal with standard sealant
- Allow for resealing whenever new services are run
- Make resealing part of every contractor’s brief
Any fire seal that’s cut or drilled needs resealing to its tested detail. New services through a sealed wall should include fire stopping in the plan.
Open gaps don’t only matter in a fire: they also let noise, draughts and sometimes pests through. Sealing them early helps on every front.
How we handle fire rated sealant in Chase Cross
Deciding which gaps need fire stopping isn’t our role; your assessor, designer or building control sets that out. Our part is applying the specified sealant carefully, to the right depth and with the right backing. We are often asked to deal with gaps left after a refit or conversion and open gaps behind door architraves, on service penetrations, flats & HMOs and plasterboard & masonry.
In a smaller place like Chase Cross, commercial jobs tend to be smaller buildings: a pub, a surgery, a school, a shop or a few business units. Each needs the same care with its sealant as any larger building.
Your job is guaranteed for a year, as with all our work.
- Place
- Chase Cross (RM5, RM1, RM4)
- Wider area
- Essex
- Guarantee
- A year, on every job
- Quotes
- A clear quote up front
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Also near Chase Cross
Other services in Chase Cross
Chase Cross: your questions answered
Can you help a landlord with a rental near Gidea Park station?
Yes, we work for landlords and agents. Just phone 0345 464 0079 or send us an email and tell us about the property, and we will give you a clear quote.
Will you come out to Chase Cross?
Yes. Chase Cross is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Is it worth trying it myself?
That depends on the joint. High-level, external movement and fire-rated joints are professional jobs, while a short indoor joint may be within reach.
Can I use normal mastic around a pipe through a fire wall?
No. Ordinary silicone, caulk or foam isn’t tested as fire stopping. If it’s been used, we remove it and use the right product.
What information do you need?
A short description and the location, plus pictures if you have them. If we need more, we’ll ask.
Is intumescent sealant the same as fire-rated sealant?
Fire-rated is the broad term for sealants tested for fire stopping. Intumescent types expand when heated, and they’re one option among several. The specification and the tested detail decide which is used.
Do you provide details of the products used?
Yes. We record the locations we have sealed and the products used to keep with your fire safety documents.
Is the work guaranteed?
Yes. Every job comes with our one-year guarantee.
What happens on the day
There’s no need to move everything out before we come, just the space around the work. We protect the rest, and the work takes anything from a few hours to several days, depending on how many gaps there are for a typical job. Parking around Chase Cross is generally easier than in a town centre, but mention any lanes, gates or long drives. If the job is outside, tell us about side access and how high the joints are.
- We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
- Each gap is measured and its substrate and service noted.
- Unsuitable material such as ordinary foam or silicone is cut out.
- The specified fire-rated sealant goes in over any backing its detail requires.
- Every location is recorded with the product used.
Getting ready for the visit
- Where the joints are inside, avoid wetting them before we arrive
- Let us know about parking restrictions
- For business premises, tell us about site rules or sign-in
Ask for a quote
It all starts with a short chat. Describe the problem, the location and the size of the job. When it suits you, call 0345 464 0079 or email us.
Advice
When something else is needed
Before booking, it’s worth knowing the limits:
- Walls or floors that weren’t built to resist fire
- Fire doors that need new seals, closers or hardware
- Fire risk assessments, which need a qualified assessor
If in doubt, phone 0345 464 0079 or send us an email and we’ll say what we think before you book.
Surfaces we seal
- Plasterboard & masonry
- Service penetrations
- Linear gaps
- Door frames
- Flats & HMOs
- Pipe & cable gaps
What fire rated sealant looks like in Chase Cross
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We work to the specification you are given, installing the product to its tested details.
For landlords with property near Gidea Park station, any gap left by new services in shared walls should be closed with a fire-rated product. If you look after a building such as Bower Park Academy, fire-stopping around service openings should be restored whenever new services go in. For buildings such as St James, gaps around pipes and cables are worth checking after any building work there.
Chase Cross is about 2 miles north of Romford, in Essex. Chase Cross gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a one-year guarantee. Chase Cross is one of 644 towns and villages in Essex where we work. You can also see our page for London, roughly 14 miles from Chase Cross.
Here we cover the RM5, RM1 and RM4 postcode area for fire rated sealant. We cover properties on Merlin Road, Avelon Road and Vernon Road and the roads around them. Neighbouring places we cover for fire rated sealant include Havering-atte-Bower (1 mile north-east), Redbridge (2 miles west), Stapleford Abbotts (2 miles north), Lambourne End (3 miles north-west) and Chigwell Row (3 miles west). Further out, we also cover Basildon (12 miles east), Harlow (12 miles north), Brentwood (6 miles east), Billericay (11 miles east), Loughton (6 miles north-west) and Wickford (15 miles east).
Around Chase Cross
Locally, jobs take us to homes and businesses close to Colley Rowe Inn, Clockhouse Primary School and Havering Country Park. Chase Cross’s nearest station is Gidea Park station, roughly 2.1 miles south-east of the centre. Other landmarks nearby include Romford Shopping Hall (1.8 miles south) and Harold Wood Hospital (2.3 miles south-east). Green spaces nearby include Bedfords Park.
Why deal with it now?
Waiting for the next refit can leave a gap open for years. On its own, sealing it now is a small job. Homes in smaller places like Chase Cross can face more weather, and failed outside joints let damp into walls. Inside, a split seal lets water into floors and panels just as it would anywhere.
What it costs depends on how much there is to do, how hard the old material is to remove and access to the work. You’ll have a clear quote before any work starts.
Why us?
- Arbo and Everbuild products
- Old sealant always removed completely
- 180+ five-star Google reviews
- Approved under the ARBOMaster scheme
Read our cost guide and customer reviews.
Surface by surface
Service penetrations
New gaps tend to show up where services have been added. Old or unsuitable filler comes out before the right sealant goes in over any backing the detail calls for.
Flats and HMOs
In flats and HMOs, the walls and floors between homes and common areas need sealing where services pass through. We work through the gaps on your assessment, flat by flat if needed.
Can I do it myself?
A DIY attempt does not rule out a professional job. We cut it out and start again, so tell us about it when you ask for a quote.
Sealing over old silicone is the commonest DIY error. Silicone doesn’t stick to old silicone, so it lifts and traps water and mould underneath. All the old material has to come out first.
How we quote for fire rated sealant
There’s no set price list, because no two jobs are the same. The quote depends on:
- Access and height
- How much there is to do
- Which sealant suits the joint
- How many areas need sealing
Some things make a job bigger or smaller: the old material and how easily it comes out, whether mould needs treating, and whether the work is at height. Your quote takes all of that into account.
Asking for a quote
Before you ask for a quote, have a think about:
- If it’s domestic, commercial or a hotel
- A few pictures by email, if you can
- Whether it has been sealed before
- The rough size of the job
To get a quote, call 0345 464 0079 or send us an email and tell us where the job is and what the problem looks like. You’ll have a clear quote before we start.