Isle of Wight · England

Floor Joint Sealing in Yarmouth

Specialist floor joint sealing for Yarmouth: the right sealant, proper preparation and a neat finish. Call for a quick quote.

  • Open gaps along the bottom of skirting boards
  • Worn sealant at door thresholds
  • Cracked grout where a tiled floor needs a movement joint

Trusted floor joint sealing in Yarmouth

How we handle floor joint sealing in Yarmouth

Across Yarmouth, we seal floor and skirting joints in homes and businesses. Each job starts with looking at the floor and the gap, since that decides which sealant suits. We are often asked to deal with open joints that fill with dirt and open joints around bathroom floor edges, across tiled floors, commercial floors and thresholds.

Work in a small place like Yarmouth just needs the journey and access planning, and the work itself is the same as on any site.

We stand behind the work with a 12-month guarantee, so you’re covered after we’ve gone.

Place
Yarmouth (PO41)
Region
Isle of Wight
Cover
A year, on every job
Quote
Quoted before any work starts
Call
0345 464 0079
Page updated
26 October 2026
The Mr Mastic team in navy uniforms in front of three Mr Mastic vans

Floor joint sealing around Yarmouth

Across the Isle of Wight, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and they don’t all move the same way. The joint at the skirting or threshold has to allow for that.

If you let a flat or house near Lymington Pier station, gaps at skirtings and thresholds are worth sealing between tenancies. If you look after a building such as Yarmouth Church of England Aided Primary School, floor and threshold joints in busy corridors wear quickly and are best resealed early.

Yarmouth is about 4 miles south-east of Lymington, in the Isle of Wight. Anywhere in PO41, we cover floor joint sealing for homes and businesses. 125 places in the Isle of Wight are on our list, large and small. For nearby work, see our Southampton page (15 miles or so).

Our applicators cover all of PO41 for floor joint sealing. Local streets include High Street, Station Road and Alma Place. With the A3054 close by, Yarmouth is easy for our applicators to reach. Close by, we work in Bouldnor (1 mile east), Cranmore (2 miles east), Hamstead (3 miles east), Shalfleet (3 miles east) and East End (5 miles north). Larger places within reach include Newport (9 miles east), Ryde (15 miles east), Cowes (9 miles north-east), Sandown (15 miles east), Shanklin (15 miles east) and Ventnor (15 miles south-east). For island and remote addresses, a little more planning is needed.

Near you in Yarmouth

In Yarmouth, that means homes and buildings near Bugle Hotel, among other places. Yarmouth’s nearest station is Lymington Pier station, roughly 3.9 miles north of the centre. A little further out are Yarmouth Castle (less than half a mile north-west) and Ferguson Family Museum (1.2 miles south-west). For a walk, there’s Lymington and Keyhaven Marshes Nature Reserve and Afton Down.

Map of Yarmouth © OpenStreetMap contributors

Keeping the joints in good condition

Joint life depends on how it’s used and looked after. We suggest:

  • Use furniture pads near skirting
  • Cone off fresh joints until they’re ready
  • Look at floor joints each spring
  • Keep floor cleaning water to a minimum at the edges

Check the joints after the first winter. Small gaps at the ends can be touched up before they spread.

A gap under the skirting collects dust and lets draughts through. Sealing it early keeps the room cleaner and stops it getting worse.

When something else is needed

Sealant is not the answer to every problem, and we will tell you before we start. It won’t solve:

  • Subfloor problems that need a flooring contractor
  • Large cracks that need a surveyor
  • Water getting under the tiles from elsewhere

Not sure which it is? You can ring 0345 464 0079 or email us and we’ll tell you honestly.

What we seal

  • Concrete floor joints
  • Commercial floors
  • Wet room & bathroom floors
  • Skirting boards
  • Tiled floors
  • Thresholds

How the job changes by surface

Tiled floors

The edge of a tiled floor, where it meets the wall or skirting, should be a flexible joint. We rake out any grout there and reseal.

Thresholds

Two different floors meeting at a threshold move differently. We bridge them with a flexible bead.

DIY sealant or a professional job?

What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, then guaranteed for a year.

A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.

Common questions in Yarmouth

Do you cover smaller places like Yarmouth?

Yes. Yarmouth is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.

Can you help a landlord with a rental near Lymington Pier station?

Yes, rental work is part of what we do. Just phone 0345 464 0079 or send us an email and tell us about the property, and we will give you a clear price.

Will I be able to paint over the new joint?

For painted skirting, we use a flexible product that can be painted. Silicone is not made to be painted, so it’s kept for wet areas and unpainted joints.

Do you guarantee your work?

Yes, for a year. If there’s a problem with our work in that time, tell us and we’ll put it right.

Are you ARBOMaster approved?

Yes. We’re ARBOMaster approved, the scheme for applicators of Arbo sealants.

Can you reseal concrete floor joints in an industrial unit?

Yes. Concrete floor joints in warehouses and units are part of our work. We’ll talk through the traffic and choose a sealant suited to it.

What causes gaps between the floor and skirting?

Floors and walls move a little with the seasons, and new floors settle. We close it with a flexible sealant that moves with the floor.

Can you seal over the old sealant?

No, because it fails. The old sealant always comes out first.

Why deal with it now?

Caulk is quick and cheap, but it cracks where the joint moves or gets wet, so the gap reappears. A flexible sealant stretches instead. In a small place like Yarmouth, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.

What it costs depends on the size of the job, how much old material has to come out and access to the work. You’ll have a clear quote before any work starts, so you know where you stand.

Why choose Mr Mastic in Yarmouth

  • Homes, businesses and hotels
  • Quality sealants from Arbo and Everbuild
  • A sealant colour to suit the surroundings
  • 12-month guarantee on every job

Read what affects the cost or customer reviews.

Signs you need floor joint sealing in Yarmouth

Concrete floor joints break down when traffic runs over open or failed joints. Hard wheels damage the joint edges.

Common reasons people contact us are:

  • Open gaps along the bottom of skirting boards
  • Gaps at thresholds between rooms
  • Skirting caulk that keeps splitting
  • Cracked grout where a tiled floor needs a movement joint

For buildings such as St. James' Church, joints in its floors, skirtings and thresholds need resealing as they wear.

Questions to ask before you book

  • How long the guarantee is
  • What insurance they hold
  • What preparation is included
  • How much experience the applicator has

How to choose a mastic man

What we do, step by step

Before we leave, we go over the finished joints with you. The work normally takes a few hours for most rooms, longer for large commercial floors, depending on how much there is to do. For a village or hamlet like Yarmouth, the journey is planned in advance: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.

  1. We look at the gap and the floor type and agree the right sealant.
  2. Old caulk, grout or sealant is removed from the joint.
  3. The joint is vacuumed clean, with backing fitted wherever depth matters.
  4. We apply a flexible sealant, or a floor-joint product on concrete, in a suitable colour.
  5. Finally we tool it smooth and explain when the floor can be used and cleaned.

Before we arrive

  • Tell us about any previous sealing or DIY attempts
  • For business premises, tell us about site rules or sign-in
  • Tell us about any water getting in

Ask for a quote

It all starts with a short chat. Describe the problem, the location and the size of the job. When it suits you, ring 0345 464 0079 or email us.

Ask for a quote

Advice

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job