Medway · England

Wigmore Floor Joint Sealing

Professional floor joint sealing in and around Wigmore, with old sealant always removed completely and a one-year guarantee.

  • Chipped and open joints in warehouse floors
  • Grout cracking in a straight line across a floor
  • Grout used at the floor edge instead of sealant

Trusted floor joint sealing in Wigmore

How we handle floor joint sealing in Wigmore

Concrete floors in warehouses and units have joints that take heavy wear. Each is resealed with a floor-joint product suited to what runs over it. If you have threshold joints that have opened or worn and cracked grout where a tiled floor needs a movement joint, we can help, whatever the surface.

Homes around Wigmore range from older cottages to newer houses, and their floors range just as widely, each moving in its own way. The sealant at skirtings and thresholds has to suit the floor it meets.

We guarantee the work for a year. If something is not right with it in that time, tell us and we will put it right.

Mr Mastic applicators lined up beside the company vans, one holding a sealant gun
Where
Wigmore (ME8)
Region
Medway
Cover
12 months on all our work
Price
Quoted before any work starts
Phone
0345 464 0079
Updated
26 October 2026

Floor joint sealing in Wigmore: local notes

Floors around Medway run from suspended timber in older homes to concrete in newer houses and units, and each moves in its own way. That is why the skirting and threshold joints need a flexible seal.

For buildings such as St Paul's Church, joints in its floors, skirtings and thresholds need resealing as they wear. Schools such as Park Wood Infant School are buildings too, and floor joints in corridors, halls and entrances take heavy wear and need resealing before the edges break up. Letting a property close to Rainham (Kent) station? Then a tidy floor and skirting joint helps a rental look ready for the next tenant.

Wigmore is about 1 mile south-east of Gillingham, in Medway. From the centre of Wigmore to the outskirts, we cover floor joint sealing for every kind of property. Wigmore is one of 68 places in Medway we cover. You can also see our page for Chelmsford, roughly 27 miles from Wigmore.

Every address in ME8 is covered for floor joint sealing. Whether your property is on Durham Road, Harvey Road and Arthur Road or anywhere close by, we can help. Nearby, we also carry out floor joint sealing in Park Wood (1 mile south), Hempstead (1 mile west), Twydall (1 mile north), Gillingham (1 mile north-west) and Capstone (2 miles west). Within a short drive, we also cover Chatham (3 miles west), Rochester (5 miles north-west), Strood (6 miles north-west), Luton (3 miles west), Lordswood (3 miles south-west) and Hoo St Werburgh (5 miles north).

Near you in Wigmore

We work in homes and buildings around Foxburrow Wood, Howard School and The Railway pub and the streets around them. The closest station to Wigmore is Rainham (Kent) station, roughly 1 mile north-east. Other landmarks nearby include Upnor Castle (4.6 miles north-west) and Pentagon Shopping Centre (3.6 miles north-west). For a walk, there’s Boxley Hills and Bishop Saltings.

Map of Wigmore © OpenStreetMap contributors

DIY versus a professional finish

A DIY attempt doesn’t rule out a professional job. We cut it out and start again, so tell us about it when you ask for a quote.

Sealing over old silicone is the commonest DIY error. Silicone doesn’t stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.

Wigmore: your questions answered

Do you work for landlords with property near Rainham (Kent) station?

Yes. We work for landlords and letting agents as well as householders, and several properties can go on one quote. Just ring 0345 464 0079 or drop us an email with the address and what needs doing, and we will give you a clear price.

Do you cover Wigmore for floor joint sealing?

Yes, Wigmore is within the area we cover. Our work covers London and the South East. Just phone 0345 464 0079 or drop us an email with a few details of the job.

Which products do you use?

We choose the sealant for the joint, not the other way round. Movement, water and weather all affect the choice, and we will tell you what we’re using.

Where are you based?

Our base is Crawley, with over 20 years’ experience. We work across South East England, London and Scotland.

What causes gaps between the floor and skirting?

Usually it’s movement: heating drying the timber, or a filler that’s too rigid. A flexible bead keeps up with the movement.

Can sealant along the skirting be painted?

For painted skirting, we use a flexible product that can be painted. Silicone isn’t made to be painted, so we use it where the joint stays unpainted.

Do you have insurance?

Yes. We’re fully insured.

Can I add another job to the visit?

Yes. Tell us about everything you’d like done and you’ll get one quote.

Why deal with it now?

Leaving skirting gaps until the next decorating job lets dirt and draughts in. It’s a quick job to seal them now in most rooms. In a smaller place like Wigmore, wherever a wall is exposed, a failed outside joint is a real source of damp. Inside, a split seal lets water into floors and panels just as it would anywhere.

Rather than a set price list, we price the job in front of us: the amount of work, the old material and the access. You will know the price before we begin.

Why us?

  • Full insurance on every job
  • Old sealant always removed completely
  • More than 20 years in sealant work
  • White, clear, grey or coloured to suit, where the product allows

Read what affects the cost and what customers say.

Aftercare tips

How long the joints last depends on use and care. We suggest:

  • Get cracks along tile grout lines looked at early
  • Keep heavy wheels off new concrete joints until cured
  • Check the sealant is paintable before decorating
  • Walk round the room once a year and look at the edges

Check the joints after the first winter. Small gaps at the ends can be touched up.

Sealing a gap while it’s small is a quick job. Ignored, they fill with dirt and open further.

Work for landlords, hotels and businesses

A neglected joint can let water reach the structure, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance that we can handle for you.

We also work for property managers and facilities teams in Wigmore and across Medway. We can quote a run of properties together.

How we quote for floor joint sealing

For a quick quote, just ask. What matters most is:

  • The old material and how stubborn it is
  • The number and length of the joints
  • Whether the work is at height
  • The product the joint needs

The cost depends on the size of the job, how hard the old material is to remove and access to the work. We give a clear quote before work begins, so you know where you stand.

Asking for a quote

When you contact us, these details help:

  • The address or postcode of the job
  • Any access issues, like height or stairs
  • Pictures of the joints, sent by email
  • What the problem is, such as mould, gaps, leaks or cracking

If you are in Wigmore and need floor joint sealing, phone 0345 464 0079 or email us. Tell us what the problem is and where, and we’ll agree the price before any work begins.

When it is not the sealant

New sealant cannot fix everything, and we’d rather say so up front. It won’t solve:

  • Floors that are uneven or need levelling
  • Concrete repairs beyond the joint
  • Large cracks that need a surveyor

If in doubt, call 0345 464 0079 or email us and we will say what we think.

Where we work in Wigmore

  • Commercial floors
  • Wet room & bathroom floors
  • Concrete floor joints
  • Tiled floors
  • Thresholds
  • Skirting boards

What we do, step by step

The work is kept neat and contained to the area we are working on. The job usually takes a few hours for most rooms, longer for large commercial floors, and we explain the cure time before we leave. For a job in Wigmore, we agree the time, the access and parking before the day. If the work is outside, the weather plays a part, as sealant needs a dry surface.

  1. We clear the edges of the floor so the joints are easy to reach.
  2. We take out the cracked caulk, grout or old sealant.
  3. We clean and dry the edges of the joint.
  4. A flexible sealant suited to the floor is applied and smooth it.
  5. Finally, we check the work and talk you through aftercare.

How to prepare

  • Clear items away from the joints we are working on
  • Keep pets and children clear of the area while we work
  • Mention if the joints have been sealed before

Getting a quote

For a quick quote, get us on the phone, or email us if that’s easier. Describe what needs sealing and we will talk you through the work and give you a clear price.

Get a quick quote

Read more

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job