Kent · England
Teynham Floor Joint Sealing
Sealing skirting-to-floor joints, tiled floor movement joints and concrete floor joints for Teynham, backed by a 12-month guarantee. Call for a quick quote.
- Failed joint filler in concrete floors
- Failed seals where bathroom floors meet baths and panels
- Floor edges that trap water and grime
Common questions in Teynham
Is Teynham within the area you cover?
Yes, smaller places are covered as well as towns. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Can you do floor joint sealing in Teynham?
Yes. Our work covers London and the South East, and Teynham is part of that. You can phone 0345 464 0079 or drop us an email and tell us what needs doing.
What causes gaps between the floor and skirting?
Timber floors and skirting shrink and swell through the year. We close it with a flexible sealant that moves with the floor.
How long does the job take?
As a guide, most jobs take a few hours, depending on the length of joint. Bigger jobs take longer.
Can I choose the sealant colour?
Yes. Sealants come in white, clear, grey and other colours, and we will agree it with you first.
Can you use decorators’ caulk instead?
Caulk is fine for dry joints that do not move, but it splits where the joint moves or gets wet. For most floor joints, we use a flexible sealant.
Is there a guarantee?
Yes. All our work carries a one-year guarantee.
Are you insured?
Yes. We’re fully insured, and we can confirm the details when we quote.
Floor joint sealing in Teynham
Gaps along the bottom of skirting are common in new and older homes alike. Decorators’ caulk generally cracks where there’s movement, so we close it with a flexible sealant instead. We work on concrete floor joints, wet room & bathroom floors and skirting boards, and people most often call us about chipped and open joints in warehouse floors and gaps at thresholds between rooms.
If you’ve bought a new home in or near Teynham, the first year or two is a good time to check the sealant. Gaps at skirtings, shower seals pulling away and missing mastic around frames are common snags.
All our work is covered by our one-year guarantee, wherever you are in Kent.
- Location
- Teynham (ME9)
- Region
- Kent
- Guarantee
- 12 months on all our work
- Price
- A clear quote up front
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
What we cannot put right
We won’t take on work that will not last, so these are the limits:
- Water getting under the tiles from elsewhere
- A tiled floor that needs relaying
- Subfloor problems that need a flooring contractor
Not sure which it is? You can ring 0345 464 0079 or drop us an email and we will tell you honestly before you book.
Joints and surfaces we work on
- Concrete floor joints
- Thresholds
- Wet room & bathroom floors
- Commercial floors
- Tiled floors
- Skirting boards
How we quote for floor joint sealing
We do not publish a price list, because no two jobs are the same. What we look at:
- How easy the joints are to reach
- The old material and how stubborn it is
- Mould in or behind the old joints
- The type of sealant required
No two jobs are quite the same, so we quote each one individually. The number of joints, how easy they are to reach and the sealant needed all play a part.
What we need to know
Photos help, but a description is a good start. Please mention:
- Photos by email, if that is easy
- Where the property is
- Whether it’s a home or a business
- How many joints, rooms or windows are involved
For a quote, call 0345 464 0079 or send us an email and tell us where the job is and what the problem looks like. You will have a clear quote before work begins.
Leave it or put it right?
Not every floor joint takes the same sealant: skirting and tiled floors need flexibility, wet areas need water resistance and concrete needs a product suited to wheels. Using the wrong one is why many floor joints fail. In a smaller place like Teynham, wherever a wall is exposed, a failed outside joint is a real source of damp. Indoors, a failed seal lets water into floors and panels as it would anywhere.
Leaving a failed joint usually makes the job bigger, not smaller, as water and mould keep getting in. If you’re unsure, ring 0345 464 0079 or drop us an email for an honest opinion and a quote.
What you get with us
- Colour agreed with you before work begins
- Anti-fungal silicone where joints get wet
- Tidy, careful work
- Arbo and Everbuild products
Read what affects the cost or customer reviews.
What happens on the day
There isn’t much for you to do on the day. Show us the job and we’ll take it from there. The work itself takes a few hours for most rooms, longer for large commercial floors from start to finish. In a smaller place like Teynham, parking is seldom the issue; lanes, gates and long drives are worth mentioning. If the job is outside, tell us about side access and how high the joints are.
- The room is cleared along the joints so we can reach them.
- We take out the cracked caulk, grout or old sealant.
- We clean and dry the edges of the joint.
- A flexible sealant suited to the floor is applied and tooled.
- Finally, we check the work and talk you through aftercare.
Before we arrive
- Let us know if you’ve seen damp or leaks
- Try not to wet indoor joints just before the visit
- For business premises, tell us about site rules or sign-in
Getting a quote
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is.
Advice
Surface by surface
Commercial floors
Washroom and kitchen floors in commercial buildings need sound edge joints. They’re resealed with a flexible, water-resistant sealant.
Wet room and bathroom floors
Bathroom floor edges get wet at every clean. A flexible seal stops water running into the gap.
What floor joint sealing looks like in Teynham
Floors around Kent run from suspended timber in older homes to concrete in newer houses and units, and each moves in its own way. That’s why the skirting and threshold joints need a flexible seal.
Community buildings like Church of St Mary are part of the picture too: floor and skirting joints in halls and kitchens wear like any others. For landlords with property near Teynham station, a tidy floor and skirting joint helps a rental look ready for the next tenant.
Teynham is about 3 miles east of Sittingbourne, in Kent. Anywhere in ME9, we can carry out floor joint sealing at your property. We cover 922 towns and villages across Kent, large and small. Chelmsford is on our list too, about 31 miles from Teynham.
Work in ME9 is quoted and booked the same way as anywhere else. If you need floor joint sealing at a property on Station Road, London Road and Belle Friday Close or anywhere close by, we can help. Other places close to Teynham include Teynham Street (1 mile north-east), Deerton Street (1 mile east), Norton Ash (1 mile south-east), Lewson Street (1 mile south-east) and Tickham (1 mile south). Larger places within reach include Maidstone (13 miles west), Ashford (13 miles south), Canterbury (13 miles east), Sittingbourne (3 miles west), Whitstable (10 miles east) and Faversham (4 miles east).
What’s near Teynham
Around Teynham, our work takes us to homes and buildings near Sittingbourne Community College and The Dover Castle pub and the streets around them. Teynham has its own railway station: Teynham station. Nearby you will also find Bayford Court (2.8 miles west) and Sittingbourne Heritage Museum (2.7 miles west).
Nearby places to Teynham
What else we do in Teynham
Do you need floor joint sealing in Teynham?
Caulk is the usual filler for skirting. It cracks where there’s movement or water.
People generally contact us after spotting one of these:
- Grout used at the floor edge instead of sealant
- Tiled floors with no room to move
- Cracked caulk along skirting in bathrooms and kitchens
- Gaps opening between the floor and skirting
Managing a site like Teynham Parochial Church of England Primary School? Then entrance and corridor floor joints take a lot of traffic.
Questions to ask before you book
- Whether they’re fully insured
- How much experience the applicator has
- Which colour the sealant will be
- How the joint is cleaned and prepared
Can I do it myself?
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
If you’ve already had a go yourself, that’s fine. We cut it out and start again.