Kent · England
Conyer Floor Joint Sealing
Floor joint sealing for Conyer and the surrounding area: careful preparation, the right product and tidy work. Ask us for a quick quote.
- Floor edges that trap water and grime
- Gaps between floors and kitchen plinths
- Perimeter joints in tiled floors filled with grout
How we handle floor joint sealing in Conyer
Concrete floors in warehouses and units have joints that take heavy wear. Each is resealed with a floor-joint product suited to what runs over it. Common call-outs are for concrete floor joints that have broken down and cracked grout where a tiled floor needs a movement joint, across skirting boards, wet room & bathroom floors and tiled floors.
Older homes in small places like Conyer often have timber floors that move with the seasons, which is why skirting and threshold joints need a flexible sealant, not filler.
All our work is covered by our 12-month guarantee.
- Location
- Conyer (ME9)
- Region
- Kent
- Cover
- A year, on every job
- Quotes
- Quoted before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Joints and finishes in Conyer homes
Across Kent, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and each moves in its own way. That’s why the skirting and threshold joints need a flexible seal.
For buildings such as Church of St Mary, joints in its floors, skirtings and thresholds need resealing as they wear.
Conyer is about 4 miles east of Sittingbourne, in Kent. We provide floor joint sealing to householders, landlords and businesses in Conyer and the surrounding area. We cover 922 towns and villages across Kent, from the larger towns to small villages. There’s also a page for Chelmsford, about 30 miles away.
We work across ME9 for floor joint sealing. Streets in the area include North Quay and Conyer Road, all of which we cover. Other places close to Conyer include Teynham Street (1 mile south-east), Deerton Street (1 mile south-east), Teynham (1 mile south), Norton Ash (2 miles south) and Lewson Street (2 miles south). Further out, we also cover Maidstone (14 miles south-west), Ashford (15 miles south), Canterbury (12 miles south-east), Sittingbourne (4 miles west), Whitstable (9 miles east) and Faversham (4 miles south-east).
Around Conyer
For rail, the closest station is Teynham station, about 1.1 miles south. A little further out are Dolphin Sailing Barge Museum (3.1 miles west) and Castle Rough (2.8 miles west).
How to look after the new joints
Joint life depends on how it’s used and looked after. Here’s what we suggest:
- Get cracks along tile grout lines looked at early
- Don’t fill floor joints with caulk where they move or get wet
- Use a well-wrung mop rather than flooding the floor
- Do not slide heavy items over sealed joints
Avoid flooding the floor when you clean. Keeping the edges drier helps the sealant last longer.
Small gaps are quick to seal. Ignored, they fill with dirt and open further and are harder to clean out.
How the job changes by surface
Wet room and bathroom floors
Floor joints in bathrooms take water every day. They’re sealed with a flexible, anti-fungal silicone.
Thresholds
A threshold is where floors and frames meet. A flexible sealant suits both floor finishes.
Should I try it myself first?
A DIY attempt doesn’t rule out a professional job. We remove it and do the joint properly, so just mention it when you contact us.
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
Your questions about floor joint sealing in Conyer
Is Conyer in your area for floor joint sealing?
Yes. Our work covers London and the South East, and Conyer is part of that. You can phone 0345 464 0079 or email us and let us know what needs doing, and we’ll give you a clear price.
Do you cover smaller places like Conyer?
Yes. Conyer is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Can I add another job to the visit?
Yes. Tell us about everything you’d like done and you’ll get one quote.
Can grout be replaced with sealant on a tiled floor?
Often, yes. A crack along a grout line often means the floor needs room to move. We rake out that line and seal it with flexible sealant.
Is the work guaranteed?
Yes. All our work carries a one-year guarantee.
Do you have insurance?
Yes. We’re fully insured for domestic and commercial work.
I’m a tenant. Can you help?
Of course. Check with your landlord; we can send the quote to them too.
How long will you be here?
A typical job takes a morning or an afternoon for most homes. Your quote will say how long we expect yours to take.
Do you need floor joint sealing in Conyer?
Caulk is the usual filler for skirting. It cracks where there’s movement or water so the gap reappears.
If you can see any of these, it’s time to have the joints looked at:
- Threshold joints that have opened or worn
- Concrete floor joints that have broken down
- Grout used at the floor edge instead of sealant
- Open gaps along the bottom of skirting boards
If you let a flat or house near Teynham station, a tidy floor and skirting joint helps a rental look ready for the next tenant.
Comparing quotes
- Which sealant they’ll use, and why
- Which colour the sealant will be
- Whether VAT is included
- How the joint is cleaned and prepared
Quotes for floor joint sealing in Conyer
Every job gets its own quote. These are the things that affect it:
- Whether the work is at height
- Whether old sealant or filler has to be cut out
- How much there is to do
- Whether there’s mould to deal with
A failed joint rarely gets cheaper to fix by waiting, because water and mould keep working on it. If you are unsure, ring 0345 464 0079 or send us an email for an honest opinion and a quote.
What to tell us for a quote
To make quoting easier, please include:
- If someone has resealed it before
- The rough size of the job
- Photos by email, if that is easy
- The address or postcode of the job
Need a quote? Please ring 0345 464 0079 or send us an email and tell us about the job. We will explain what we’d do and send you a clear quote before we start.
More services for Conyer
Leave it or put it right?
Not every floor joint takes the same sealant: skirting and tiled floors need flexibility, wet areas need water resistance and concrete needs a product suited to wheels. Using the wrong one is why many floor joints fail. In a small place like Conyer, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.
Homes and businesses are quoted the same way: the amount of work, the access and the products needed, plus any working-time requirements on site. Call for a quick quote and we’ll go through it with you.
Why choose Mr Mastic in Conyer
- Rated 4.9 stars on Google
- White, clear, grey or coloured to suit, where the product allows
- ARBOMaster approved applicator
- We never seal over old sealant
Read how sealant jobs are priced and customer reviews.
How it works
Good joint work is mostly preparation, and we don’t rush it. Every joint is cleaned and dried before new material goes in. All told, the work takes a few hours, depending on the length of joint. In a small place like Conyer, access is normally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- We clear the edges of the floor so the joints are easy to reach.
- Old material is removed from the joint.
- Edges are cleaned and dried.
- A flexible sealant suited to the floor is applied and tooled.
- We check the joints and explain the aftercare.
Getting ready for the visit
- Keep pets and children clear of the area while we work
- Mention any leaks or damp you’ve noticed
- Tell us if parking is tricky
Get a quote
Every job is quoted individually, so start by telling us what you need. Simply call 0345 464 0079 or send us an email and describe the job.