Kent · England
Remedial Sealant in Conyer
Removing failed, mouldy or leaking sealant and putting it right in Conyer, with a 12-month guarantee on every job. Ask us for a quote.
- Smears and lumps from a botched reseal
- Beads that never stuck properly
- Floor or wall movement joints that have failed
Remedial sealant in Conyer
A movement joint stops working when its sealant splits or sets hard. The old sealant comes out and backing goes in to control the depth, before resealing with a flexible product suited to the movement. Common call-outs are for sealant that came away because the surface wasn’t prepared and a shower that leaks however often it’s resealed, across failed movement joints, shrunken worktop sealant and mouldy bath & shower sealant.
In a village or hamlet like Conyer, homes are often older cottages and farmhouses alongside a few newer houses. Older walls and timber floors can move a little, and cracked grout and split sealant are often the first signs.
All our work is covered by our 12-month guarantee.
- Place
- Conyer (ME9)
- Wider area
- Kent
- Cover
- One year on every job
- Quotes
- A clear price before work begins
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Should I try it myself first?
Sealing over old silicone is the commonest DIY error. New silicone will not bond to old, so it lifts and traps water and mould underneath. All the old material has to come out first.
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
When it isn’t the sealant
In fairness, there are a few things sealant won’t fix:
- Leaks from a shower valve, waste or pipework (a plumber’s job)
- Tiles that have come away from the wall
- A tray or worktop that needs refixing first
Not sure which it is? You can call 0345 464 0079 or email us and we’ll tell you honestly.
Where we work in Conyer
- Leaking tray & enclosure joints
- Shrunken worktop sealant
- Expansion joints
- Mouldy bath & shower sealant
- Failed movement joints
- Botched or over-sealed joints
Towns and villages near Conyer
What else we do in Conyer
Conyer homes and their sealant
Conyer is close to the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, and sealant and grout that work that hard wear out sooner. Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
If you let a flat or house near Teynham station, failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak. If you live in an older home near Church of St Mary, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Conyer is about 4 miles east of Sittingbourne, in Kent. Anywhere in ME9, we can carry out remedial sealant at your property. Across Kent, we cover 922 places, and Conyer is one of them. For nearby work, see our Chelmsford page, about 30 miles away.
Jobs for remedial sealant in ME9 is quoted and booked the same way as anywhere else. Streets in the area include North Quay and Conyer Road. We also cover Teynham Street (1 mile south-east), Deerton Street (1 mile south-east), Teynham (1 mile south), Norton Ash (2 miles south) and Lewson Street (2 miles south). Within a short drive, we also cover Maidstone (14 miles south-west), Ashford (15 miles south), Canterbury (12 miles south-east), Sittingbourne (4 miles west), Whitstable (9 miles east) and Faversham (4 miles south-east).
What’s near Conyer
The closest station to Conyer is Teynham station, roughly 1.1 miles south. Well-known places in the area include Dolphin Sailing Barge Museum (3.1 miles west) and Castle Rough (2.8 miles west).
Surface by surface
Leaking trays & enclosures
A cracked tray, failed valve or leaking waste needs a different fix. We say so rather than reseal.
Windows & doors
Some leaks around windows come from the wall or the window itself. If the frame joint isn’t the cause, we’ll say so.
Landlords, agents and businesses in Conyer
Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Resealing at the right time is simple maintenance that we can handle for you.
Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements and we will quote.
How we quote for remedial sealant
We do not publish a price list. What we look at:
- How many areas need sealing
- Working hours on commercial sites
- The number and length of the joints
- Access and height
Leaving a failed joint normally makes the job bigger, not smaller, because water and mould keep working on it. If you are unsure, phone 0345 464 0079 or email us for an honest opinion and a quote.
What to tell us for a quote
When you contact us, these details help:
- The type of property
- Any previous sealing or DIY work
- Roughly how big the job is
- The problem you’ve noticed
Call for a quick quote, or send an email if you’d rather. Tell us about the joints that need doing and we will talk you through the work.
Conyer questions
I let a flat near Teynham station. Can you help?
Yes. We work for landlords and agents as well as householders, and several properties can be quoted together. You can call 0345 464 0079 or drop us an email with the details for a clear quote.
Do you cover Conyer for remedial sealant?
Yes, Conyer is within the area we cover. Our work covers London and the South East. Just phone 0345 464 0079 or send us an email with a few details of the job, and we’ll send you a clear quote.
What does remedial sealant cost?
There’s no set price, as it depends on the job: its size, the old material, access and the product needed. You’ll get a clear quote before any work starts.
My shower still leaks after a reseal. Can you sort it?
Yes, usually. We check it’s the sealant and not the tray, valve or waste, then the joints are stripped and resealed.
Where are you based?
We are based in Crawley, and we cover South East England, London and all of Scotland.
Can I do it myself?
Some simple jobs can be done by a careful DIYer. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
Can you remove old sealant without damaging the bath?
Yes. Careful removal is most of a remedial job, especially on acrylic, enamel and uPVC.
Can you work on commercial sites?
Yes. Hotels, offices and other businesses use us, and we are fully insured.
Why act early in Conyer
Mould under a bead can’t be reached by cleaning. The layers have to come out, and the joint treated and dried before resealing. Where a wall is exposed, as many are in small places like Conyer, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
A few things move the cost up or down: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether the work is at height. Your quote takes all of that into account.
Why us?
- We leave the area clean and tidy
- Over 20 years’ experience
- ARBOMaster approved applicator
- Any old sealant cut out fully, not covered over
How it works
Every visit runs the same way: we look at the joints together, protect the area around them, carry out the job and clear up. It normally takes a few hours, depending on how many layers have to come out. In a small place like Conyer, access is generally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- First we find out how and where the joint has failed.
- All the old sealant comes out, including any layers underneath.
- Next, any mould is treated and the joint dried.
- Moving joints get backing and a flexible sealant to suit.
- We tool the joint and tell you about anything else that needs attention.
Before we arrive
- For indoor joints, keep the area dry beforehand if you can
- Mention any tricky access
- Plan for the work area to be out of bounds to pets and children
Ask for a quote
For remedial sealant in Conyer, call 0345 464 0079 or email us. A short description of the job and where it is helps us quote, and we will agree the price before any work begins.