Kent · England
Gutter, fascia & soffit sealing in Conyer, Kent
Problem with your gutter and fascia joints in Conyer? We cut out the old, prepare the joints and apply the right sealant, with a 12-month guarantee.
- Damp patches inside below a leaking gutter
- Dripping gutter ends
- Streaks down the brickwork from a leaking joint
How we handle gutter sealing in Conyer
Open fascia and soffit joints spoil the roofline and can let weather in. They’re sealed in a matching colour where possible. If you’re dealing with internal damp traced to a gutter joint and old gutter sealant that has let go, we can put it right.
External sealant needs dry, clean surfaces, so work around Conyer is planned for dry weather. Let us know about access to every wall, plus any garages or outbuildings.
You get a 12-month guarantee, the same in Conyer as everywhere else we work.
- Place
- Conyer (ME9)
- Wider area
- Kent
- Guarantee
- One year on every job
- Quotes
- A clear quote up front
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
What we can’t put right
A few problems are outside what sealant work can do:
- Water backing up from a blocked pipe
- Sagging gutters or broken brackets
- Cracked, split or warped gutter sections
Not sure which it is? You can call 0345 464 0079 or send us an email and we’ll tell you honestly.
Joints and surfaces we work on
- uPVC fascias
- Gutter end caps
- Garage door frames
- Roofline trims
- Gutter joints
- Soffit joints
Different surfaces, different methods
Garage door frames
Resealing a garage door frame keeps rain and draughts out.
Gutter end caps
Stop ends hold back water at the end of a run. A failed seal makes them leak.
How the visit works
The work is kept neat and contained to the joints we’re treating, so you can get on with your day. Expect the work to take anything from an hour or two to a few hours, and we explain the cure time before we leave. For a village or hamlet like Conyer, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- First we trace the drip and check the gutter is not damaged.
- The old sealant and dirt are cleaned out of the joint.
- We dry the joint so the new sealant can bond.
- We seal the joint with a sealant made for gutters.
- The gutter is checked and debris around the joints cleared.
Before we arrive
- Tell us about access, such as stairs, a lift or high-level joints
- Mention any sign-in or site rules at work premises
- Where the joints are inside, avoid wetting them before we arrive
Ask for a quote
There’s no standard price list. Instead, we give you a clear quote for your job. To arrange one, ring 0345 464 0079 or drop us an email.
Advice
Aftercare tips
No joint lasts for ever, but care makes a real difference. A few tips:
- Keep downpipes clear
- Get leaks sealed before the wet months
- Check fascia and soffit joints for gaps
- Get a dropping gutter looked at quickly
Check the joints after heavy rain. It’s the easiest time to see a leak.
Split sealant on fascias and trims lets water in behind. Sealing it early keeps the boards behind dry and the wall below.
Also in Conyer
FAQs for Conyer
Do you work for landlords with property near Teynham station?
Yes, rental work is part of what we do. You can call 0345 464 0079 or drop us an email with the address and a few details, and we will give you a fixed price before we start.
Will you come out to Conyer?
Yes, we do. Our work covers London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Can a leaking gutter joint be sealed?
Often, yes. A clean, dry joint resealed with gutter sealant usually stops the drip. A split or warped section needs replacing.
Is there any odour?
That depends on the sealant. Some products have a noticeable smell, others very little, and any smell fades as they cure.
Can new sealant go over the old?
No, it won’t last. It can look neat for a few weeks, but the new bead soon lifts. The old sealant has to come out completely.
Are you fully insured?
Yes. We are fully insured.
Is sealant enough for a gutter that has dropped?
Sealing a sagging joint will not last. A gutter installer needs to refix it.
Can you fit new guttering?
No. Our work is sealing joints and replacement is a job for an installer.
What gutter sealing looks like in Conyer
Conyer is within about 1 mile of the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. Both are hard on gutter, fascia and roofline joints, which can dry out and crack sooner where a building faces the weather. London and the South East are among the drier parts of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.
If you live in an older home near Church of St Mary, older walls, gutters and the joints where extensions meet them need a flexible sealant.
Conyer is about 4 miles east of Sittingbourne, in Kent. Across the ME9 area, we can carry out gutter sealing at your property. Across Kent, we cover 922 places, and Conyer is one of them. Our Chelmsford page covers work nearby.
Here we cover the ME9 postcode area for gutter sealing. Gutter sealing is available to properties on North Quay and Conyer Road and the roads around them. Neighbouring places we cover for gutter sealing include Teynham Street (1 mile south-east), Deerton Street (1 mile south-east), Teynham (1 mile south), Norton Ash (2 miles south) and Lewson Street (2 miles south). Larger places within reach include Maidstone (14 miles south-west), Ashford (15 miles south), Canterbury (12 miles south-east), Sittingbourne (4 miles west), Whitstable (9 miles east) and Faversham (4 miles south-east).
Near you in Conyer
The nearest railway station is Teynham station, about 1.1 miles south. Nearby you will also find Dolphin Sailing Barge Museum (3.1 miles west) and Castle Rough (2.8 miles west).
How we quote for gutter sealing
Every job gets its own quote. These are the things that affect it:
- Any working-time requirements on site
- The product the joint needs
- Any mould that needs treating
- How much there is to do
The cost depends on the amount of work, how much old material has to come out and access to the work. We give a clear quote before any work starts.
Asking for a quote
When you contact us, it’s useful to know:
- Where the job is, and your postcode
- What the problem is, such as mould, gaps, leaks or cracking
- If it’s domestic, commercial or a hotel
- How many joints, rooms or windows are involved
To get a quote, call 0345 464 0079 or drop us an email and tell us where the job is and what the problem looks like. We’ll give you a clear price before any work starts.
DIY sealant or a professional job?
If you are set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it does not work out, we can still put it right.
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions.
Common problems we fix in Conyer
Gutter joints depend on seals that wear out. Sun and cold make the gutter expand and contract and that movement opens up tired joints.
Any of these means the joints need attention:
- Trim joints where the sealant has failed
- Failed sealant on a garage door frame
- Dripping gutter ends
- Open joints in fascias and soffits
For landlords with property near Teynham station, a gutter joint that drips onto the wall can turn into a damp complaint, so it’s worth checking.
What to look for in a quote
- Which colour the sealant will be
- Is the old sealant removed completely?
- Whether they’re fully insured
- What happens if the job turns out different