Kent · England
Fire-rated sealant in Conyer, Kent
Problem with your fire-stopping gaps in Conyer? We remove the old material, prepare the joints and seal them properly, with a 12-month guarantee.
- Open gaps behind door architraves
- Fire stopping disturbed by later work
- Fire seals that have cracked with movement
About our fire rated sealant in Conyer
A fire seal relies on being installed the way it was tested: the right depth, the right backing and the right product for the substrate. That is the part we focus on. We work on flats & HMOs, service penetrations and plasterboard & masonry, and people most often call us about door frames with gaps between frame and wall and gaps where walls meet ceilings or slabs.
For a small place like Conyer, the journey and timings are agreed in advance, so the job can fit around bookings, guests or opening times where possible.
We guarantee the work for a year. If there’s a problem with our work within the year, let us know and we’ll sort it.
- Location
- Conyer (ME9)
- Region
- Kent
- Cover
- A year, on every job
- Quotes
- A clear quote up front
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Looking after it afterwards
Good habits help new joints last longer. A few tips:
- Ask which product was used before you paint
- Get damaged fire seals looked at promptly
- Ask every contractor to reseal any fire stopping they disturb
- Store the list of sealed gaps with your building paperwork
Don’t drill through or remove a fire seal without putting it back properly. New services through a sealed wall should include fire stopping in the plan.
An open gap isn’t only a fire issue: they also let noise, draughts and sometimes pests through. Sealing them early helps on every front.
Can I do it myself?
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and does not move well, and getting the depth right matters as much as the look.
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it does not work out, we can still put it right.
Commercial buildings in Conyer
For seaside hotels, guest houses and holiday lets around Conyer, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We work to the specification you’re given, installing the product to its tested details.
Rented homes near Teynham station change hands often, and new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant. If you look after a church, hall or community building such as Church of St Mary, gaps around pipes and cables are worth checking after any building work there.
Conyer is about 4 miles east of Sittingbourne, in Kent. We carry out fire rated sealant for homes and businesses in Conyer and nearby. Our Kent coverage runs to 922 places, and Conyer is one of them. We also work in Chelmsford, around 30 miles away.
Jobs for fire rated sealant in ME9 is quoted and booked the same way as anywhere else. You’ll find streets such as North Quay and Conyer Road. Neighbouring places we cover for fire rated sealant include Teynham Street (1 mile south-east), Deerton Street (1 mile south-east), Teynham (1 mile south), Norton Ash (2 miles south) and Lewson Street (2 miles south). Within a short drive, we also cover Maidstone (14 miles south-west), Ashford (15 miles south), Canterbury (12 miles south-east), Sittingbourne (4 miles west), Whitstable (9 miles east) and Faversham (4 miles south-east).
Near you in Conyer
The nearest railway station is Teynham station, roughly 1.1 miles south of the centre. Well-known places in the area include Dolphin Sailing Barge Museum (3.1 miles west) and Castle Rough (2.8 miles west).
Conyer questions
Is Conyer in your area for fire rated sealant?
Yes, Conyer is within the area we cover. Our work covers London and the South East. Just phone 0345 464 0079 or drop us an email with a few details of the job.
Will you come out to Conyer?
Yes, Conyer is covered. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Can you fill the gap behind a fire door frame?
Yes. We seal the gap between the frame and the wall with a suitable fire-rated product, to the product’s details. The door leaf and its hardware need a door specialist.
What does intumescent mean?
Intumescent means it swells when heated to help seal the gap. Intumescent sealants are one kind of fire-rated sealant; the right one depends on the gap and what passes through it.
Will you assess my building’s fire safety?
No, assessment isn’t something we do. Once you have a specification or action list from your assessor or designer, we will quote for the sealant work on it.
Is there any odour?
Possibly a little. It fades as the sealant cures, and ventilation helps.
Is standard sealant good enough for a fire gap?
No. It looks sealed but will not perform as fire stopping. Use a product tested for that gap and service.
I’m a tenant. Can you help?
Of course. Ask your landlord first, and we can send them the quote if that helps.
When it is not the sealant
It helps to know what we cannot do too:
- Deciding what fire stopping a building needs
- Doors that are not fire doors in the first place
- Big openings where sealant alone isn’t the tested solution
Not sure which it is? You can ring 0345 464 0079 or drop us an email and we will tell you honestly before you book.
Surfaces we seal
- Pipe & cable gaps
- Plasterboard & masonry
- Service penetrations
- Door frames
- Flats & HMOs
- Linear gaps
For landlords and businesses
Mouldy or split sealant often shows up at the end of a tenancy, and it’s easy to sort out between tenants. We can quote for more than one property at once.
We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements and we’ll give you a quote.
What happens if it’s left?
For some gaps, sealant isn’t the right answer and another system is needed. Large holes, cable bundles and plastic pipes can call for batts, collars or wraps. If a gap is not suitable for sealant, we’ll tell you. Older cottages and farmhouses around Conyer can have timber floors and frames, where water from a failed joint can cause rot if it’s left.
The cost reflects the work involved, not guesswork. That’s why we ask about the job first and agree the price before starting.
Why book with us
- An ARBOMaster approved applicator
- 180+ five-star Google reviews
- 20+ years of sealant experience
- Tidy, careful work
Read what affects the cost and our reviews.
What else we do in Conyer
What happens on the day
Before we leave, we go over the finished joints with you and explain the cure time. The visit itself usually takes a few hours for a handful of gaps, and longer for a whole building, depending on the size of the job. Somewhere like Conyer needs a little journey planning: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- Before starting, we go through the specification or action list with you.
- Each gap is measured and its substrate and service noted.
- Unsuitable material such as ordinary foam or silicone is cut out and the gap cleaned.
- The specified fire-rated sealant goes in over any backing its detail requires.
- We hand over a list of locations and products for your files.
How to prepare
- Let us know about earlier repairs to the joints
- Mention any sign-in or site rules at work premises
- Tell us about any water getting in
Ask for a quote
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is, and email photos if that’s easy.
Advice
Quotes for fire rated sealant in Conyer
We quote each job individually. These are the things that affect it:
- Working hours on commercial sites
- How easy the joints are to reach
- The number and length of the joints
- Mould in or behind the old joints
Instead of a standard rate, we price the job in front of us: the amount of work, the old material and the access. The price is agreed before we begin.
What we need to know
There’s no need for technical detail. Just tell us:
- Whether it has been sealed before
- Pictures of the joints, sent by email
- What the problem is, such as mould, gaps, leaks or cracking
- How we’d reach the joints
For fire rated sealant in Conyer, ring 0345 464 0079 or email us. Tell us what the problem is and where, and we’ll agree the price before any work begins.