Kent · England
Norton Ash Remedial Sealant
Failed sealant joints in Norton Ash need attention? We remove the old material, prepare the joints and seal them properly, and the work is guaranteed for a year.
- Beads that never stuck properly
- Dark patches showing through the sealant
- Leaks that keep coming back after resealing
Remedial sealant in Norton Ash, done properly
If a joint fails again and again, something is causing it. Movement, the wrong product or a leak from somewhere else will defeat even a perfect bead. We look for the cause before we reseal. If you’re dealing with dark patches showing through the sealant and sealant applied over old sealant that has lifted, we can put it right, on mouldy bath & shower sealant, failed movement joints and shrunken worktop sealant alike.
For a small place like Norton Ash, remedial sealant is planned like any other job: the journey and access are simply agreed in advance. In the bathroom or kitchen, the work is the same as in any town.
A 12-month guarantee comes with the work, just as it does everywhere we cover.
- Place
- Norton Ash (ME9)
- Region
- Kent
- Cover
- One year on every job
- Quotes
- Quoted before any work starts
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
What remedial sealant looks like in Norton Ash
Norton Ash is within about 3 miles of the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, which wears sealant and grout out faster than in a quiet home. Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.
Homes close to Church of St Mary include some older properties, and bathrooms in older houses have often been refitted more than once, with sealant laid over sealant. If you let a flat or house near Teynham station, failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.
Norton Ash is about 3 miles west of Faversham, in Kent. Wherever you are in the ME9 postcode area, we cover remedial sealant for homes and businesses. Norton Ash is one of 922 places in Kent where we work for remedial sealant. For nearby work, see our Chelmsford page, about 32 miles away.
Jobs for remedial sealant in ME9 is quoted and booked the same way as anywhere else. You will find streets such as London Road and Lower Norton Lane, all of which we cover. We also cover the places around Norton Ash: Deerton Street (1 mile north), Lewson Street (1 mile south-west), Tickham (1 mile south-west), Teynham (1 mile north-west) and Teynham Street (1 mile north). Within a short drive, we also cover Maidstone (14 miles west), Ashford (13 miles south), Canterbury (11 miles east), Sittingbourne (4 miles west), Whitstable (9 miles east) and Faversham (3 miles east).
Near you in Norton Ash
Typical jobs here are in homes near The Plough Inn. The closest station to Norton Ash is Teynham station, roughly 1.1 miles north-west. Nearby you will also find Newnham Castle (2.7 miles south-west) and Sittingbourne Heritage Museum (3.8 miles west).
Landlords, agents and businesses in Norton Ash
We also work for businesses, from offices to washrooms and kitchens. For commercial premises, we can talk through working times when we quote.
For anyone letting property in or around Norton Ash, several properties can be quoted together. Send us the addresses and the work at each.
Norton Ash: your questions answered
Will you come out to Norton Ash?
Yes, we do. We work across London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
I let a flat near Teynham station. Can you help?
Yes, rental work is part of what we do. Just ring 0345 464 0079 or email us and tell us about the property, and we’ll give you a clear quote.
Which products do you use?
It depends on the joint: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. Brands we use include Arbo and Everbuild.
Will it make a mess?
Tidy work is part of the job. We protect what’s around the joints, and the area is left clean when we finish.
How much does remedial sealant cost in Norton Ash?
Every job is different, so each one gets its own quote. To get one, ring 0345 464 0079 or email us with a short description of the job.
Can you quote for more than one area?
Yes, and it often makes sense. Doing several areas at once is normally more efficient, so mention them when you ask for a quote.
Will the old sealant be removed?
Yes, always, and completely. New sealant will not bond properly to old, so any old material comes out before anything new goes in.
Can I do it myself?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
What affects the quote in Norton Ash
Your quote is based on your job. We take into account:
- The number of rooms or windows
- How easy the joints are to reach
- The number and length of the joints
- When we can work, for business premises
What you pay reflects the work, not guesswork. That is why we ask about the job first.
What we need to know
When you contact us, these details help:
- If it’s domestic, commercial or a hotel
- The address or postcode of the job
- The rough size of the job
- Photos by email, if that is easy
There’s no standard price list. Instead, your job gets its own clear quote. To get started, call 0345 464 0079 or email us.
Keeping the joints in good condition
Good habits help new joints last longer. Our tips:
- Report a tray that rocks or a worktop that lifts
- Air the bathroom so the sealant can dry
- Keep movement joints clear of mortar and paint
- Do not add new sealant on top of old
If we’ve found a cause, such as a loose tray or a leaking waste, get it fixed, because the new sealant cannot hold back a problem underneath.
A failing joint rarely gets better on its own. Each use pushes more water behind the bead, into whatever is behind or below. Sorting it early limits the damage.
What happens on the day
We work through the job in order: protection first, then preparation, sealing and a tidy-up. Typically it takes a few hours, depending on how many layers have to come out, and the area is left clean. Somewhere as small as Norton Ash, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- First we find out how and where the joint has failed.
- We strip the joint completely, removing any layers below.
- Next, any mould is treated and the joint dried.
- Where the joint moves, backing and a flexible sealant suited to the movement go in.
- The new joint is tooled neatly and we explain anything else we found.
Preparing for the visit
- For business premises, tell us about site rules or sign-in
- Plan for the work area to be out of bounds to pets and children
- For indoor joints, keep the area dry beforehand if you can
Ask for a quote
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints, and email photos if that’s easy.
Read more
DIY versus a professional finish
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, then guaranteed for a year.
If you’ve already had a go yourself, that is fine. We cut it out and start again, so just mention it when you contact us.
When to call us in Norton Ash
Some joints fail because water is reaching them from behind. A slow leak behind the tiles soaks the joint from the back, so the silicone goes mouldy or lets go.
Look out for any of the following:
- Black mould underneath the bead
- Gaps opening along the back of the worktop
- A shower that leaks however often it’s resealed
- Wide, uneven beads that look worse than the old ones
Schools such as Teynham Parochial Church of England Primary School are buildings too, and washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Comparing quotes
- How the surfaces are prepared before sealing
- Whether you can choose the colour
- How long the guarantee is
- When the joint can take water or movement
Surface by surface
Windows & doors
Frames resealed over the top end up with hard, layered mastic. We remove it all and clean back to sound surfaces before backing and resealing.
Mouldy bath & shower sealant
Where mould keeps coming back, ventilation is generally part of the cause. Along with resealing, we’ll mention if the room needs better ventilation.