Kent · England
Remedial Sealant in Four Oaks
Failed sealant joints in Four Oaks need attention? We remove the old material, prepare the joints and seal them properly.
- Over-sealed joints coming away
- Kitchen joints letting water behind the worktop
- Torn expansion joints
Remedial sealant in Four Oaks
Decorators’ caulk in a shower, bathroom silicone on a window, a rigid filler in a movement joint fails however neatly it’s applied. We take it out and use a sealant made for that joint. Common call-outs are for products that weren’t meant for the joint and beads that never stuck properly, on expansion joints, botched or over-sealed joints and leaking tray & enclosure joints.
For a small place like Four Oaks, remedial sealant is planned like any other job: it just means planning the journey and access beforehand. In the bathroom or kitchen, the work is the same as in any town.
All our work is covered by our one-year guarantee, wherever you are in Kent.
- Where
- Four Oaks (ME13)
- Region
- Kent
- Guarantee
- A year, on every job
- Quotes
- Quoted before any work starts
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
What the job involves on each surface
Leaking trays & enclosures
When failed joints are the cause, they’re all cut out and renewed, tray edges and screen profiles included.
Worktops & kitchens
Kitchen joints often have grease and cleaning residue deep in them, so cleaning takes longer than in a bathroom.
Four Oaks questions
Can you help a landlord with a rental near Faversham station?
Yes, rental work is part of what we do. Just phone 0345 464 0079 or send us an email and tell us about the property, and we will send you a clear quote.
Is Four Oaks within the area you cover?
Yes. Four Oaks is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Do you remove the old sealant?
Yes, always, and completely. New silicone does not stick to old silicone, so any old material comes out before anything new goes in.
Which products do you use?
Products from Arbo and Everbuild, among others, picked for each joint. We’ll tell you what we’re using and why.
Do you hold any approvals?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we are part of it.
Is there any odour?
There can be a smell while the sealant cures. Ventilation helps.
Do you guarantee remedial jobs?
Yes. Remedial work carries the same 12-month guarantee as all our work.
Will it make a mess?
No. We protect the surfaces around the joints, and we clear up the old sealant and our materials before we leave.
What happens if it’s left?
Mould under a bead cannot be reached by cleaning. The layers have to come out, so the joint can be treated and resealed. Where a wall is exposed, as many are in small places like Four Oaks, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
Commercial jobs are quoted on the same basis as homes: how much there is to do, how we reach it and what it needs, along with when we can work on site. Call for a quick quote and we’ll explain what it covers.
Why us?
- ARBOMaster approved applicator
- Trusted Arbo and Everbuild sealants
- Sanitary silicone with an anti-fungal additive in wet areas
- 20+ years of sealant experience
What we are called out for in Four Oaks
A lot of failed joints have been sealed over rather than replaced. Silicone does not bond to silicone, so the new layer peels, and damp and mould settle between them.
The most common problems we see are:
- Gaps opening along the back of the worktop
- Thick, messy sealant smeared over tiles
- A shower that leaks however often it’s resealed
- Products that weren’t meant for the joint
Rented homes near Faversham station change hands often, and botched sealant from a previous quick fix is easier to strip out between tenants.
Before you book anyone
- What happens if the job turns out different
- What the cure time is
- Whether they seal over old material or remove it
- How the surfaces are prepared before sealing
Aftercare tips
Simple care keeps the joints in good condition. We recommend:
- Keep movement joints clear of mortar and paint
- Deal with small splits early
- Never seal over old silicone
- Clean sealant with mild products only
Ventilation keeps mould away from the new bead: run the fan during and after showers, or open a window.
If a joint has failed more than once, stop resealing it. Have someone find out why, or the next bead will go the same way.
Towns and villages near Four Oaks
What else we do in Four Oaks
How we quote for remedial sealant
We don’t publish a price list. What we look at:
- How easy the joints are to reach
- Whether there’s mould to deal with
- Whether old sealant or filler has to be cut out
- Any working-time requirements on site
Instead of a standard rate, we price the job in front of us: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
Helping us quote
When you call or email, it’s useful to know:
- Roughly how big the job is
- If someone has resealed it before
- The type of property
- The problem you’ve noticed
Asking for a quote is easy: let us know the job and the location and its rough size. A few photos by email make the job easier to understand, and we will take it from there.
Four Oaks homes and their sealant
Four Oaks is within about 3 miles of the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, and sealant and grout that work that hard wear out sooner. Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
If you look after a building such as Luddenham School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes. For an older house near a landmark such as St Mary's Church, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
Four Oaks is about 1 mile west of Faversham, in Kent. Anywhere in ME13, we can carry out remedial sealant at your property. Across Kent, we cover 922 places, Four Oaks among them. Chelmsford is on our list too, around 33 miles away.
Postcode districts we cover here for remedial sealant: ME13. Close by, we work in Ospringe (1 mile south-east), Norton Ash (1 mile west), Oare (1 mile north-east), Deerton Street (1 mile north-west) and Davington (1 mile east). Further out, we also cover Maidstone (15 miles west), Ashford (13 miles south), Canterbury (10 miles east), Sittingbourne (5 miles west), Whitstable (8 miles east) and Herne Bay (13 miles east).
Landmarks near Four Oaks
In Four Oaks, that means homes and buildings near The Abbey School and Oare Meadow, among other places. The nearest railway station is Faversham station, roughly 1.8 miles south-east. Other landmarks nearby include Newnham Castle (3.3 miles south-west).
DIY sealant or a professional job?
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.
Sealing over old silicone is the commonest DIY error. Silicone does not stick to old silicone, so it peels away and traps moisture behind it. Everything old must be removed first.
How the visit works
On the day, we start by going over the job with you, so there are no surprises. Surfaces next to the work are protected before any work begins. The work normally takes a few hours, depending on how many layers have to come out. Somewhere like Four Oaks needs a little journey planning: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- First we work out whether the problem is the sealant, movement or a leak.
- Each layer is cut out and the residue cleaned off.
- Mould is treated and the joint dried.
- We reseal with a product suited to the joint, backed where needed.
- We finish neatly and point out anything that needs another trade.
Getting ready for the visit
- Keep pets and children clear of the area while we work
- Mention any tricky access
- On commercial sites, let us know about site rules
Getting a quote
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is.