Shetland Islands · Scotland
Scalloway Floor Joint Sealing
Sealing skirting-to-floor joints, tiled floor movement joints and concrete floor joints in Scalloway, with a one-year guarantee on every job. Ask us for a quote.
- Open joints that fill with dirt
- Chipped and open joints in warehouse floors
- Failed seals where bathroom floors meet baths and panels
Scalloway: your questions answered
Is Scalloway in your area for floor joint sealing?
Yes. We work across all of Scotland, and Scalloway is part of that. You can drop us a line at info@mrmastic.co.uk and let us know what needs doing.
Will you come out to Scalloway?
Yes, smaller places are covered as well as towns. Our work covers the whole of Scotland, including the islands, where work is planned around ferry crossings. Just mention lanes, gates or anything else about the route when you book.
Can you seal where the floor meets the bath panel?
Yes. Where a floor meets a bath panel, kitchen plinth or skirting in a wet area, we use a flexible silicone so water cannot get into the gap.
How long before the joint can take traffic?
We will tell you before we leave. That depends on the product, and walking on it usually comes before mopping or wheeled traffic.
Where are you based?
Our base is Crawley, with over 20 years’ experience. We work across South East England, London and Scotland.
Why does the gap under my skirting keep coming back?
It’s normally the floor moving: timber drying in winter, floors settling, or caulk that cannot stretch. A flexible sealant stays closed as the floor moves.
Can you match the sealant colour?
Yes. White, clear and grey are common, and other colours are available, and we’ll agree it with you first.
Do I have to be there?
Access is agreed with you when the job is booked. For inside work, that normally means someone being in.
How we handle floor joint sealing in Scalloway
In commercial and industrial units, concrete floor joints take a hammering from wheels and traffic. Each is resealed with a floor-joint product suited to what runs over it. We work on concrete floor joints, thresholds and commercial floors, and the jobs we see most are rigid edge joints in tiled floors and threshold joints that have opened or worn.
For a place like Scalloway, the journey and access are planned in advance. Outdoor plot mastic needs dry weather, but indoor floor and skirting joints can be sealed whatever the forecast.
Your job is guaranteed for a year, as with all our work.
- Location
- Scalloway (ZE1)
- Region
- Shetland Islands
- Cover
- A year, on every job
- Quote
- Quoted before any work starts
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Towns and villages near Scalloway
Other services in Scalloway
Joints and finishes in Scalloway homes
Timber frame is common in newer Scottish homes, and as the frame dries and settles, skirting and sealant joints can open up. Floors around the Shetland Islands run from suspended timber in older homes to concrete in newer houses and units, and each moves in its own way. The joint at the skirting or threshold has to allow for that.
Community buildings like Methodist Church are part of the picture too: floor and skirting joints in halls and kitchens wear like any others.
Scalloway is in the Shetland Islands. We provide floor joint sealing to homes and businesses in Scalloway and nearby. Scalloway is one of 63 towns and villages in the Shetland Islands we cover for floor joint sealing.
We work across ZE1 for floor joint sealing and the streets around it. If you need floor joint sealing at a property on Main Street, Craigpark Road and Meadowfield Road or a nearby road, we can help. Scalloway sits on or near the B9074. If you are just outside Scalloway, we cover Gulberwick (2 miles east), Hamnavoe (3 miles south-west), Veensgarth (3 miles north-east), Sound (4 miles east) and Toogs (4 miles south-west). Scalloway is among the bigger towns we cover in the Shetland Islands. Island and remote addresses take a little more planning, so tell us where you are when you ask for a quote.
Around Scalloway
Around Scalloway, our work takes us to homes and buildings near Fisherman's Arms. Well-known places in the area include Castle Holm (4.9 miles north) and Gilbert Bain Hospital (4.3 miles east). For a walk, there’s Hill of Berry and Loch of Burwick.
Different surfaces, different methods
Commercial floors
Commercial floors take more traffic than most homes. We talk through the traffic and choose a sealant suited to it.
Tiled floors
Perimeter joints in tiled floors should be sealant, not grout. We rake out any grout there and reseal.
Why it’s worth doing now in Scalloway
Floor joints left open collect dirt that’s hard to clean out. A neat sealed joint is easier to clean and finishes the floor. When the nearest tradesperson is a drive away, it’s tempting to leave a small leak, but water through a failed joint keeps working away until it’s fixed.
Every job is a little different, so each one gets its own quote. Size, access and the product the joint needs all make a difference, and we’ll explain the quote if you ask.
Why choose Mr Mastic in Scalloway
- A choice of colours where the product allows
- Colour picked to suit the job
- Old sealant always removed completely
- Neat joints and a tidy finish
Take a look at how sealant jobs are priced or our reviews.
How to look after the new joints
Joint life depends on how it’s used and looked after. We suggest:
- Keep floor cleaning water to a minimum at the edges
- Have a cracking tiled floor checked before tiles break
- Lift furniture rather than dragging it across joints
- Walk round the room once a year and look at the edges
Check the joints after the first winter. If anything has opened, it’s easy to reseal early on.
Once concrete joint edges start to break, wheels make it worse. Early resealing helps keep the joint intact.
How the visit works
Every visit runs the same way: we look at the joints together, protect the area around them, carry out the job and tidy away. Most jobs take a morning or an afternoon for most homes. Around Scalloway, distance and access matter more than parking. Let us know how to find you and how to reach the joints, and the visit is planned around that.
- The room is cleared along the joints so we can reach them.
- Old material is removed from the joint.
- Edges are cleaned and dried.
- A flexible sealant suited to the floor is applied and tooled.
- Finally, we check the work and talk you through aftercare.
Before we arrive
- Mention if the joints have been sealed before
- Let us know about stairs, lifts or work at height
- Where the joints are inside, avoid wetting them before we arrive
How to get a quote
Getting a quote is simple: tell us what needs doing and where. Photos by email help us understand the job.
Read more
What affects the cost of floor joint sealing
There’s no set price list, because no two jobs are the same. What we look at:
- Whether there’s mould to deal with
- The size of the job
- The product the joint needs
- Whether old sealant or filler has to be cut out
Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, any mould to treat, and whether the work is at height. Your quote takes all of that into account.
What to tell us for a quote
Photos help, but a description is a good start. Try to tell us:
- If someone has resealed it before
- Pictures of the joints, sent by email
- What’s wrong with the joints now
- The address or postcode of the job
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints.
Do you need floor joint sealing in Scalloway?
Decorators’ caulk is often used along skirting because it’s cheap and paintable. It cracks where there’s movement or water, which is why so many skirting joints look broken.
Look out for any of the following:
- Gaps between floors and kitchen plinths
- Tiled floors with no room to move
- Failed joint filler in concrete floors
- Open joints that fill with dirt
In and around Scalloway, as anywhere, good floor joint sealing starts with a clean, dry, properly prepared joint.
Questions to ask before booking
- What happens if the job turns out different
- How long to leave it before use
- How the joint is cleaned and prepared
- How much experience the applicator has
What sealant work can’t fix
Some problems need a builder, plumber or other trade rather than us:
- Concrete repairs beyond the joint
- Movement too big for a sealant joint
- Bouncy or failing floorboards
If you’re not sure, just drop us a line at info@mrmastic.co.uk and we’ll give you a straight answer before booking.
Where we work in Scalloway
- Wet room & bathroom floors
- Tiled floors
- Concrete floor joints
- Skirting boards
- Thresholds
- Commercial floors