Brighton and Hove · England
Floor & skirting joints in Saltdean, Brighton and Hove
We cover Saltdean for sealing skirting-to-floor joints, tiled floor movement joints and concrete floor joints. Old sealant removed completely, joints prepared properly.
- Caulk that has cracked where the floor moves
- Open joints that fill with dirt
- Open gaps along the bottom of skirting boards
Saltdean: your questions answered
Can you do floor joint sealing in Saltdean?
Yes. Our work covers London and the South East, and Saltdean is part of that. You can call 0345 464 0079 or drop us an email and let us know what needs doing, and we’ll send you a clear quote.
Is Saltdean within the area you cover?
Yes. Saltdean is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
How much does floor joint sealing cost in Saltdean?
It depends on the job, so we quote each one individually. To get one, call 0345 464 0079 or send us an email with a short description of the job.
Can sealant along the skirting be painted?
For painted skirting, we use a flexible product that can be painted. Silicone won’t take paint, so we use it where the joint stays unpainted.
I rent my home. Can I book you?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Is there a guarantee?
Yes. Every job comes with a 12-month guarantee.
Do you have insurance?
Yes, we’re fully insured for domestic and commercial work.
Do you hold any approvals?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we’re part of it.
Floor joint sealing in Saltdean, done properly
Where skirting is painted, we can use a flexible sealant that takes paint. For bathrooms and kitchens, silicone is usually the better choice, which is not made to be painted. Typical jobs include grout used at the floor edge instead of sealant and gaps at thresholds between rooms, on wet room & bathroom floors, thresholds and tiled floors.
For a new home in or near Saltdean, it’s worth checking the sealant early. Common snags include open skirting joints, lifting shower seals and gaps around frames.
You are covered for a year from the day we finish. If anything is not right with it, phone 0345 464 0079 or send us an email.
- Location
- Saltdean (BN2)
- Region
- Brighton and Hove
- Cover
- One year on every job
- Price
- Quoted before any work starts
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
What affects the quote in Saltdean
We do not publish a price list, because jobs vary so much. What we look at:
- Whether old sealant or filler has to be cut out
- How easy the joints are to reach
- The size of the job
- Mould in or behind the old joints
We do not show prices on the website, because each job is priced on what it involves. Call for a quick quote and we’ll talk you through it.
Helping us quote
Photos by email are helpful but not essential. Try to tell us:
- What the problem is, such as mould, gaps, leaks or cracking
- How many joints, rooms or windows are involved
- Access, such as stairs, a lift or height
- Any previous sealing or DIY work
Every job is quoted individually, so start by telling us what you need. Simply call 0345 464 0079 or drop us an email and describe the job, and photos are welcome.
Joints and finishes in Saltdean homes
Across Brighton and Hove, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and each moves in its own way. The joint at the skirting or threshold has to allow for that.
If you let a flat or house near Southease station, gaps at skirtings and thresholds are worth sealing between tenancies. Community buildings like St Nicholas are part of the picture too: joints in its floors, skirtings and thresholds need resealing as they wear. Managing a site like Saltdean Primary School? Then entrance and corridor floor joints take a lot of traffic.
Saltdean is about 1 mile west of Telscombe, in Brighton and Hove. For floor joint sealing in and around Saltdean, it’s easy to get a quote: please call 0345 464 0079 or email us. We are based in Crawley and cover Brighton and Hove. Our Brighton and Hove coverage runs to 30 places, and Saltdean is one of them.
Postcode districts we cover here for floor joint sealing: BN2. We cover properties on Hill Road, School Lane and Lynwood Road. We also cover the places around Saltdean: East Saltdean (1 mile east), Rottingdean (1 mile north-west), Telscombe (1 mile east), Ovingdean (2 miles north-west) and Roedean (3 miles west). Within a short drive, we also cover Brighton (4 miles north-west), Brighton and Hove (7 miles west), Hove (6 miles west), Carlton Hill (4 miles west), Hanover (4 miles north-west) and West Hill (5 miles west).
What’s near Saltdean
Locally, jobs take us to homes and businesses close to Beacon Hill, Queen Victoria pub and Longhill High School. The closest station to Saltdean is Southease station, roughly 3.7 miles north-east of the centre. A little further out are French Convalescent Home (3 miles west) and Brighton Motor Museum (3.5 miles west). Not far away are Beacon Hill Local Nature Reserve and Newmarket Hill.
Keeping the joints in good condition
To keep the joints looking good and working properly:
- Keep caulk for dry, still joints only
- Mark off resealed joints in warehouses
- Sweep along the edges of the floor
- Keep floor cleaning water to a minimum at the edges
Keep off the joint for the time we give you. Feet are generally fine before mopping or wheeled traffic.
Small gaps are quick to seal. Left alone, they collect dirt and widen.
What happens if it’s left?
An open concrete floor joint gets wider every time something heavy crosses it. Resealing it early protects the edges and keeps the damage down. In a smaller place like Saltdean, wherever a wall is exposed, a failed outside joint is a real source of damp. Indoors, a failed seal lets water into floors and panels as it would anywhere.
Commercial jobs are quoted on the same basis as homes: how much there is to do, how we reach it and what it needs, along with when we can work on site. Call for a quick quote and we will go through it with you.
Why Saltdean clients choose us
- ARBOMaster approved applicator
- White, clear, grey or another colour, product permitting
- More than 20 years in sealant work
- Tidy, careful work
Read how sealant jobs are priced and customer reviews.
DIY sealant or a professional job?
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is.
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
What we do, step by step
At the end, we look at the finished work together and tell you how long to leave it. The work normally takes a few hours for most rooms, longer for large commercial floors, depending on the amount of work. In a smaller place like Saltdean, parking is seldom the issue; lanes, gates and long drives are worth mentioning. For outside work, side access and the height of the joints help us plan.
- First, the floor type, the gap and the traffic are checked.
- Any old caulk, grout or sealant is raked or cut out.
- The joint is vacuumed clean and backing fitted where needed.
- We apply the sealant in a colour that suits the floor.
- We tool it neatly and tell you when it can be walked on and cleaned.
Getting ready for the visit
- Mention if the joints have been sealed before
- Try not to wet indoor joints just before the visit
- Mention any sign-in or site rules at work premises
Getting a quote
For a quick quote, get us on the phone, or send an email if you’d rather. Describe what needs sealing and we will talk you through the work and give you a clear price.
Related advice
When it isn’t the sealant
We’ll always be straight with you, so here’s what sealant cannot fix:
- Tiles that have lifted or broken
- Large cracks that need a surveyor
- Water getting under the tiles from elsewhere
If you are not sure, just call 0345 464 0079 or email us and we’ll give you a straight answer.
Surfaces we seal
- Skirting boards
- Wet room & bathroom floors
- Thresholds
- Commercial floors
- Concrete floor joints
- Tiled floors
Surface by surface
Tiled floors
Large or heated tiled floors need room to move. Where needed, a line of grout is replaced with flexible sealant.
Thresholds
Where a tiled floor meets timber or carpet, the joint takes movement from both sides. A flexible sealant bridges them.