Kent · England
Ringwould Floor Joint Sealing
Professional floor joint sealing in and around Ringwould, with old sealant always removed completely and a 12-month guarantee.
- Cracked grout where a tiled floor needs a movement joint
- Concrete floor joints that have broken down
- Gaps between floors and kitchen plinths
Floor joint sealing for homes and businesses in Ringwould
Every floor moves a little, so its edges need a joint that can flex. We seal skirting gaps, tiled floor movement joints and concrete floor joints. If you are dealing with caulk that has cracked where the floor moves and failed joint filler in concrete floors, we can put it right.
Older homes in small places like Ringwould often have timber floors that move with the seasons, which is why skirting and threshold joints need a flexible sealant, not filler.
The work is guaranteed for twelve months. If something isn’t right with it in that time, tell us and we’ll put it right.
- Where
- Ringwould (CT14)
- Wider area
- Kent
- Cover
- 12 months on all our work
- Quotes
- Quoted before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Floor joint sealing around Ringwould
Across Kent, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and they do not all move the same way. That’s why the skirting and threshold joints need a flexible seal.
For site and facilities teams at buildings such as Kingsdown and Ringwould CofE Primary School, entrance and corridor floor joints take a lot of traffic. For buildings such as Church of St Nicholas, joints in its floors, skirtings and thresholds need resealing as they wear.
Ringwould is about 2 miles south of Deal, in Kent. Jobs in Ringwould get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. 922 places in Kent are on our list, large and small. Chelmsford is on our list too, around 54 miles away.
Jobs for floor joint sealing in CT14 is quoted and booked the same way as anywhere else. We cover properties on Back Street, Front Street and Queen's Rise. Being close to the A258, Ringwould is easy for our applicators to reach for floor joint sealing. Nearby, we also carry out floor joint sealing in Kingsdown (1 mile east), Martin (1 mile south-west), Martin Mill (1 mile south-west), Sutton (2 miles north-west) and East Langdon (2 miles south-west). Further out, we also cover Canterbury (14 miles north-west), Margate (14 miles north), Dover (5 miles south-west), Folkestone (11 miles south-west), Ramsgate (11 miles north) and Broadstairs (13 miles north).
Landmarks near Ringwould
Around Ringwould, our work takes us to homes and buildings near Five Bells pub and Goodwin Academy. For rail, the closest station is Walmer station, roughly 1.3 miles north of the centre. A little further out are Walmer Castle (1.6 miles north-east) and St Margaret's Museum (2.6 miles south).
Also near Ringwould
What else we do in Ringwould
FAQs for Ringwould
Is Ringwould within the area you cover?
Yes, we do. Our work covers London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Is Ringwould in your area for floor joint sealing?
Yes, Ringwould is within the area we cover. We work across London and the South East. You can phone 0345 464 0079 or drop us an email and let us know what needs doing.
Can grout be replaced with sealant on a tiled floor?
Often, yes. We replace the grout along a suitable line with flexible sealant in a matching colour. If tiles are loose, that needs fixing first.
Where do you work from?
Our base is Crawley. Our area covers South East England, London and Scotland.
Can you quote for more than one area?
Yes. Several rooms, windows or areas can go on one quote.
What should I tell you?
A short description and the location, with pictures by email if possible. If we need more, we will ask.
Do you seal warehouse floor joints?
Yes, from warehouses and units to offices and shops. We can plan around your opening times, and out-of-hours work can be arranged.
Will I be able to paint over the new joint?
Where you plan to paint, we do. Silicone does not take paint, so tell us your plans.
For landlords and businesses
Housing providers, facilities teams and property managers book us too. We can quote a run of properties together.
Failed sealant is one of the commonest items on a check-out report, and it’s quick to put right between tenancies. Several properties can go on one quote.
Different surfaces, different methods
Concrete floor joints
Concrete floors have sawn or formed joints to control cracking. We reseal them with a floor-joint product suited to the traffic.
Thresholds
Where a tiled floor meets timber or carpet, the joint takes movement from both sides. A flexible sealant bridges them.
What affects the cost of floor joint sealing
The price is agreed before any work begins. It’s based on:
- The amount of work
- How easy the joints are to reach
- The old material and how stubborn it is
- The type of sealant required
Some things make a job bigger or smaller: the old material and how easily it comes out, any mould to treat, and whether we need extra access for height. We take all of that into account in your quote.
Helping us quote
Photos by email are helpful but not essential. Try to tell us:
- Whether it has been sealed before
- A few photos by email, if you can
- Where the property is
- Roughly how big the job is
To get a quote, call 0345 464 0079 or drop us an email with the location and a short description of the problem. We’ll send you a clear quote before any work starts.
DIY versus a professional finish
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
If you’ve already had a go yourself, that is fine. We cut it out and start again, so tell us about it when you ask for a quote.
The process
When we get to you, we check the joints match what you told us. If anything is different, we explain it before carrying on. After that, the work takes a few hours, depending on the length of joint. Somewhere like Ringwould needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- We start by looking at the floor, the gap and the traffic, then choose the product.
- We take out any old caulk, sealant or grout along the line.
- The joint is cleaned, vacuumed and backed where depth needs controlling.
- A flexible sealant, or a floor-joint sealant for concrete, is applied in a colour to suit.
- Finally we tool it smooth and explain when the floor can be used and cleaned.
Preparing for the visit
- Let us know about parking restrictions
- Let us know about earlier repairs to the joints
- For business premises, tell us about site rules or sign-in
Getting a quote
Every job is quoted individually, so start by telling us what you need. Simply call 0345 464 0079 or drop us an email and describe the job, and photos are welcome.
Read more
What sealant work cannot fix
To be straight with you, there are a few things sealant will not fix:
- Subfloor problems that need a flooring contractor
- Movement too big for a sealant joint
- Cracked or broken concrete slabs
Not sure which it is? You can ring 0345 464 0079 or drop us an email and we will tell you honestly.
Surfaces we seal
- Concrete floor joints
- Wet room & bathroom floors
- Thresholds
- Tiled floors
- Commercial floors
- Skirting boards
When to call us in Ringwould
A new floor or screed shrinks and settles as it dries. Gaps at the edges appear in the first year or so.
Signs it’s time to call us include:
- Open joints that fill with dirt
- Chipped and open joints in warehouse floors
- Worn sealant at door thresholds
- Open gaps along the bottom of skirting boards
Letting a property close to Walmer station? Then gaps at skirtings and thresholds are worth sealing between tenancies.
Comparing quotes
- Are they insured?
- What guarantee comes with the work
- Whether all the old sealant comes out first
- What product goes in the joint