Kent · England
Floor Joint Sealing in Martin Mill
Professional floor joint sealing in and around Martin Mill, with old sealant always removed completely and a 12-month guarantee.
- Chipped and open joints in warehouse floors
- Threshold joints that have opened or worn
- Gaps opening between the floor and skirting
How we handle floor joint sealing in Martin Mill
Thresholds are where two floors, or a floor and a door, meet. We use a flexible product that suits both floors so the joint stays neat. If you have open gaps along the bottom of skirting boards and tiled floors with no room to move, we can help, on wet room & bathroom floors, tiled floors and thresholds alike.
Around Martin Mill, older homes often have timber floors that move through the year, so skirting and threshold joints need a flexible sealant rather than a rigid filler.
We guarantee the work for a year. If there’s a problem with our work within the year, let us know and we’ll sort it.
- Where
- Martin Mill (CT15)
- Wider area
- Kent
- Guarantee
- One year on every job
- Price
- Quoted before any work starts
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
What affects the quote in Martin Mill
Some jobs are bigger than they look, and some smaller. The main factors:
- How many rooms, windows or areas are involved
- Mould in or behind the old joints
- The number and length of the joints
- Any working-time requirements on site
Commercial jobs are quoted on the same basis as homes: the amount of work, how we reach it and what it needs. Ask us for a quote and we will go through it with you.
What we need to know
You don’t need to know the technical terms. It helps if you can tell us:
- If it’s domestic, commercial or a hotel
- Roughly how big the job is
- What’s wrong with the joints now
- Any previous sealing or DIY work
For a quote, phone 0345 464 0079 or drop us an email with the location and a short description of the problem. We’ll send you a clear quote before any work starts.
Places near Martin Mill
What else we do in Martin Mill
Why it’s worth doing now in Martin Mill
The right product depends on the floor and the traffic: skirting and tiled floors need flexibility, wet areas need water resistance and concrete needs a product suited to wheels. Using the wrong one is why many floor joints fail. Around Martin Mill, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
Instead of a standard rate, we look at what your job involves: the amount of work, the old material and the access. The price is agreed before we begin.
Why book with us
- Rated 4.9 stars on Google
- Sealant colour chosen to suit
- Anti-fungal silicone where joints get wet
- Old sealant always removed completely
See what affects the cost and our reviews.
Martin Mill: your questions answered
Can you help a landlord with a rental near Martin Mill station?
Yes, we work for letting agents and landlords. You can phone 0345 464 0079 or email us with the address and a few details, and we will give you a fixed price before work begins.
Do you cover smaller places like Martin Mill?
Yes. Martin Mill is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Why has a gap opened under my skirting?
Generally it’s movement: timber drying in winter, floors settling, or caulk that cannot stretch. A flexible bead keeps up with the movement.
Will the old sealant be removed?
Yes. We cut out all the old sealant and clean the joint before applying anything new.
Should I try DIY first?
Sometimes. Preparation is everything: all the old sealant out, and a clean, dry joint. If it doesn’t work out, we can redo it.
What information do you need?
A short description and the location, with photos by email if possible. If we need more, we will ask.
Can you match the sealant colour?
Yes. Sealants come in white, clear, grey and other colours for many products, and we agree the colour with you before work begins.
Do you hold any approvals?
Yes. We are approved under the ARBOMaster scheme.
What sealant work can’t fix
A few problems are outside what sealant work can do:
- Water getting under the tiles from elsewhere
- Structural movement or subsidence
- A tiled floor that needs relaying
If in doubt, phone 0345 464 0079 or send us an email and we will say what we think.
Joints and surfaces we work on
- Tiled floors
- Wet room & bathroom floors
- Skirting boards
- Commercial floors
- Concrete floor joints
- Thresholds
What the job involves on each surface
Concrete floor joints
Concrete floors have sawn or formed joints to control cracking. They’re resealed with a product chosen for what runs over them.
Tiled floors
Large or heated tiled floors need room to move. Where needed, a line of grout is replaced with flexible sealant.
How it works
Before we leave, we go over the finished joints with you and explain the cure time. The work normally takes a morning or an afternoon for most homes, depending on how much there is to do. Somewhere as small as Martin Mill, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- We start by looking at the floor, the gap and the traffic, then choose the product.
- Whatever is in the joint now, whether caulk, grout or sealant, comes out.
- The joint is vacuumed clean, with backing fitted wherever depth matters.
- A flexible sealant, or a floor-joint sealant for concrete, is applied in a colour to suit.
- The joint is tooled to a neat finish and we tell you when it can take feet and a mop.
Before we arrive
- Let us know about stairs, lifts or work at height
- On commercial sites, let us know about site rules
- Let us know if you’ve seen damp or leaks
How to get a quote
For a quick quote, get us on the phone, or send an email if you’d rather. Describe what needs sealing and we’ll explain what’s involved and give you a clear quote.
Read more
Keeping the joints in good condition
After the cure time, these simple habits help:
- Do not fill floor joints with caulk where they move or get wet
- Vacuum floor joints regularly to stop grit building up
- Act on grout cracks that run in a straight line
- Lift furniture rather than dragging it across joints
Mop with a well-wrung mop rather than flooding the floor. Keeping the edges drier helps the sealant last longer.
In wet areas, an open floor joint lets water reach the subfloor. A sound seal stops that happening.
Do you need floor joint sealing in Martin Mill?
Decorators’ caulk is often used along skirting because it’s cheap and paintable. In a joint that moves or gets wet, it splits.
The most common problems we see are:
- Chipped and open joints in warehouse floors
- Grout used at the floor edge instead of sealant
- Skirting that has pulled away from the floor
- Worn sealant at door thresholds
If you look after a church, hall or community building such as Church of St Augustine, joints in its floors, skirtings and thresholds need resealing as they wear.
What to look for in a quote
- How much experience the applicator has
- Are they insured?
- How long the guarantee is
- How hidden problems are handled
Floor joint sealing around Martin Mill
Across Kent, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and each moves in its own way. That is why the skirting and threshold joints need a flexible seal.
Letting a property close to Martin Mill station? Then gaps at skirtings and thresholds are worth sealing between tenancies. If you look after a building such as Langdon Primary School, entrance and corridor floor joints take a lot of traffic.
Martin Mill is about 3 miles north-east of Dover, in Kent. Every kind of property in Martin Mill can book us for floor joint sealing. The work is guaranteed for a year. Martin Mill is one of 922 places in Kent we cover. We also work in Chelmsford, around 54 miles away.
Here we cover the CT15 postcode area for floor joint sealing. We cover properties on Station Road, Barley Close and Lucerne Lane. Other places close to Martin Mill include Martin (1 mile north-west), East Langdon (1 mile west), West Cliffe (1 mile south), West Langdon (1 mile north-west) and Ringwould (1 mile north-east). We also work in nearby towns such as Canterbury (14 miles north-west), Margate (15 miles north), Dover (3 miles south-west), Folkestone (10 miles south-west), Ramsgate (12 miles north) and Broadstairs (14 miles north).
Landmarks near Martin Mill
Around Martin Mill, our work takes us to homes and buildings near Duke of York's Royal Military School and The Lantern Inn, among other places. There’s a railway station in Martin Mill itself: Martin Mill station. Nearby you will also find Royal Victoria Hospital (3.4 miles south-west) and Dover Castle (3.1 miles south). Not far away are Dover Western Heights.