Aberdeenshire · Scotland

Floor & skirting joints in Monymusk, Aberdeenshire

Floor joint sealing in Monymusk from a team with over 20 years’ experience. 180+ five-star Google reviews and a 4.9 rating.

  • Failed seals where bathroom floors meet baths and panels
  • Skirting that has pulled away from the floor
  • Failed joint filler in concrete floors

Trusted floor joint sealing in Monymusk

Floor joint sealing in Monymusk

In commercial and industrial units, concrete floor joints take a hammering from wheels and traffic. We reseal them with a product chosen for the movement and the traffic. If you are dealing with tiled floors with no room to move and gaps between floors and kitchen plinths, we can help.

Timber frame is common in newer Scottish homes, and it settles over the first years, which shows as gaps at skirtings and floor joints. In older homes, timber floors move through the year too.

You get a one-year guarantee, the same in Monymusk as everywhere else we work.

Place
Monymusk (AB51)
Region
Aberdeenshire
Cover
A year, on every job
Price
Quoted before any work starts
Email
info@mrmastic.co.uk
Last updated
26 October 2026
Eleven members of the Mr Mastic team standing in front of branded white vans

Monymusk: your questions answered

What guarantee comes with floor joint sealing in Monymusk?

Every job comes with our 12-month guarantee, wherever it is. We’re also fully insured and ARBOMaster approved.

Do you cover Monymusk for floor joint sealing?

Yes, Monymusk is within the area we cover. We work across all of Scotland. You can drop us a line at info@mrmastic.co.uk and tell us what needs doing, and we will give you a clear price.

Do you have insurance?

Yes. We’re fully insured, and we’ve been doing sealant work for more than 20 years.

Is it messy?

Very little: the area around the joints is protected first, and we clear up the old sealant and our materials before we leave.

What causes gaps between the floor and skirting?

Timber floors and skirting shrink and swell through the year. A flexible sealant closes the gap without cracking like caulk.

Can I add another job to the visit?

Yes. Just list everything you need.

I’m a tenant. Can you help?

We can work for tenants, landlords or agents. Get your landlord’s agreement first.

Can you seal where the floor meets the bath panel?

Yes. We cut out any old sealant or caulk and reseal with flexible silicone in a colour to suit.

What sealant work can’t fix

Some problems need a builder, plumber or other trade rather than us:

  • Leaks from a failed tanking system
  • Movement too big for a sealant joint
  • Subfloor problems that need a flooring contractor

Not sure which it is? You can drop us a line at info@mrmastic.co.uk and we’ll tell you honestly before you book.

Surfaces we seal

  • Skirting boards
  • Commercial floors
  • Tiled floors
  • Concrete floor joints
  • Thresholds
  • Wet room & bathroom floors

What the job involves on each surface

Concrete floor joints

Old filler, dust and debris are cleaned out of the joint first. Backing goes in where the depth needs controlling.

Thresholds

Thresholds between rooms meet two floors and often a door frame. A flexible sealant suits both floor finishes.

What affects the cost of floor joint sealing

Call for a quick quote. What matters most is:

  • Access and height
  • The type of sealant required
  • The amount of work
  • Whether old sealant or filler has to be cut out

Instead of a standard rate, we price the job in front of us: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.

Helping us quote

The more you tell us, the more accurate the quote. When you ask for a quote, tell us:

  • What the problem is, such as mould, gaps, leaks or cracking
  • Roughly how big the job is
  • Access, such as stairs, a lift or height
  • If it’s domestic, commercial or a hotel

We do not publish a price list. Instead, we give you a clear price for your job. To get started, email us at info@mrmastic.co.uk.

Aftercare tips

A little care helps the new joints last. We recommend:

  • Look at floor joints each spring
  • Act on grout cracks that run in a straight line
  • Use a well-wrung mop rather than flooding the floor
  • Keep dirt out of the joints

In commercial units, keep pallet trucks and heavy wheels off new joints until they’ve cured. Mark the area off so drivers avoid it while it cures.

Water getting into floor joints in bathrooms and kitchens can damage what’s underneath. Resealing early keeps it out.

DIY versus a professional finish

If you’ve already had a go yourself, that’s fine. We cut it out and start again.

The biggest DIY mistake is sealing over old sealant. New silicone won’t bond to old, so it lifts and traps water and mould underneath. Everything old must be removed first.

What happens if it’s left?

Not every floor joint takes the same sealant: skirting and tiled floors need flexibility, wet areas need water resistance and concrete needs a product suited to wheels. Getting that choice wrong is a common reason joints fail. Around Monymusk, water from a failed joint in an older stone home can soak into timber and plaster, which is a far bigger job than the sealant.

Leaving a failed joint normally makes the job bigger, not smaller. If you’re unsure, email us at info@mrmastic.co.uk for an honest opinion and a quote.

Why Monymusk clients choose us

  • Neat joints and a tidy finish
  • Every job guaranteed for a year
  • Full insurance on every job
  • An ARBOMaster approved applicator

Read how sealant jobs are priced or our reviews.

How the visit works

Most of a good job is in the preparation, so that is where we spend the time. Joints are cleaned back and dried before anything new goes in. All told, the work takes a few hours for most rooms, longer for large commercial floors. For a place like Monymusk, longer drives are planned in advance. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.

  1. We look at the gap and the floor type and agree the right sealant.
  2. We take out any old caulk, sealant or grout along the line.
  3. We clean and vacuum the joint and fit backing where the depth needs setting.
  4. A flexible sealant, or a floor-joint sealant for concrete, is applied in a colour to suit.
  5. The joint is tooled to a neat finish and we tell you when it can take feet and a mop.

Before we arrive

  • Let us know about stairs, lifts or work at height
  • Tell us about any previous sealing or DIY attempts
  • Let us know about parking restrictions

Ask for a quote

Every job is quoted individually. Just email us at info@mrmastic.co.uk with the details.

Ask for a quote

Read more

Floor joint sealing around Monymusk

Many new homes in Scotland are timber-framed, and as the frame dries and settles, skirting and sealant joints can open up. Across Aberdeenshire, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and they do not all move the same way. The joint at the skirting or threshold has to allow for that.

If you look after a church, hall or community building such as St Mary's Parish Church, floor and skirting joints in halls and kitchens wear like any others. Around Monymusk, as everywhere, floor joint sealing is only as good as the preparation behind it.

Monymusk is about 7 miles south-west of Inverurie, in Aberdeenshire. Every kind of property in Monymusk is covered for floor joint sealing. Every job comes with our 12-month guarantee. Monymusk is one of 161 towns and villages in Aberdeenshire we cover. We also work in Aberdeen, around 16 miles away.

Jobs for floor joint sealing in AB51 is quoted and booked the same way as anywhere else. We cover properties on The Square, St Andrews and St Ninians. Nearby, we also carry out floor joint sealing in Sauchen (3 miles south), Kemnay (3 miles east), Kirkton of Tough (4 miles west), Midmar (5 miles south) and Cottown (5 miles east). We also work in nearby towns such as Inverurie (7 miles north-east), Westhill (10 miles south-east), Banchory (12 miles south), Garioch (7 miles north-east), Kintore (7 miles east) and Oldmeldrum (11 miles north-east). Island and remote addresses take a little more planning, so tell us where you are when you ask for a quote.

Landmarks near Monymusk

We work in homes and buildings around Grant Arms Hotel. A little further out are Cluny Castle (1.6 miles south). For a walk, there’s Cairn William.

Map of Monymusk © OpenStreetMap contributors
20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job