Shetland Islands · Scotland
Floor Joint Sealing in Melby
Floor joints in Melby need attention? We remove the old material, prepare the joints and seal them properly.
- Chipped and open joints in warehouse floors
- Skirting that has pulled away from the floor
- Grout used at the floor edge instead of sealant
What floor joint sealing looks like in Melby
Across the Shetland Islands, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and they don’t all move the same way. That is why the skirting and threshold joints need a flexible seal. Island jobs need planning around ferries and the weather, so give us as much notice as you can.
If you look after a church, hall or community building such as St Margaret's Kirk and Graveyard, joints in its floors, skirtings and thresholds need resealing as they wear.
Melby is in the Shetland Islands. From the centre of Melby to the outskirts, floor joint sealing is available for homes and businesses alike, from flats and houses to offices and hotels. Melby is one of 63 places in the Shetland Islands we cover.
Jobs for floor joint sealing in ZE2 works the same way as everywhere else we cover. Neighbouring places we cover for floor joint sealing include Sandness (1 mile south-east), Walls (6 miles south-east), Aith (10 miles east), Easter Skeld (11 miles south-east) and Brae (12 miles north-east). Island and remote addresses take a little more planning, so tell us where you are when you ask for a quote.
Landmarks near Melby
Not far away are Loch of Norby.
Floor joint sealing in Melby
Good floor joints come down to the right product and clean, prepared edges. We remove what’s there first, the joint is cleaned and backed where needed, then the new sealant goes in. We work on commercial floors, tiled floors and skirting boards, and people most often call us about gaps opening between the floor and skirting and gaps at thresholds between rooms.
Work in a place like Melby is planned ahead, journey included. Outdoor plot mastic needs dry weather, but indoor floor and skirting joints can be sealed whatever the forecast.
You get a one-year guarantee, the same in Melby as everywhere else we work.
- Place
- Melby (ZE2)
- Region
- Shetland Islands
- Guarantee
- A year, on every job
- Quotes
- Quoted before any work starts
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Landlords, agents and businesses in Melby
Hotels need rooms back in use, so we plan the work room by room. We’ve worked in hotels as well as homes and businesses.
Mouldy or split sealant often shows up at the end of a tenancy, and it’s easy to sort out between tenants. We can quote for more than one property at once.
Do you need floor joint sealing in Melby?
Wheels crossing an unfilled concrete joint chip its edges. Hard wheels damage the joint edges until the joint widens.
It’s worth asking for a quote if you see:
- Grout cracking in a straight line across a floor
- Rigid edge joints in tiled floors
- Failed joint filler in concrete floors
- Gaps between floors and kitchen plinths
In and around Melby, as anywhere, good floor joint sealing starts with a clean, dry, properly prepared joint.
Before you book anyone
- Whether the sealant suits the joint
- How the surfaces are prepared before sealing
- Whether all the old sealant comes out first
- How hidden problems are handled
Other services in Melby
How the visit works
We keep the work tidy and contained to the area we’re working on, so you can get on with your day. The job normally takes a few hours, depending on the length of joint, and we explain the cure time before we leave. Somewhere like Melby may be a longer drive, and the journey is planned ahead. Mention tracks, gates, ferries or anything else about the route.
- First, the floor type, the gap and the traffic are checked.
- We remove what’s in the joint now.
- The joint is vacuumed clean and backing fitted where needed.
- We apply the sealant in a colour that suits the floor.
- We tool it neatly and tell you when it can be walked on and cleaned.
Preparing for the visit
- Plan for the work area to be out of bounds to pets and children
- On commercial sites, let us know about site rules
- Where the joints are inside, avoid wetting them before we arrive
How to get a quote
For a quick quote, get us on the phone, or send an email if you’d rather. Tell us about the joints that need doing and we’ll explain what’s involved.
Advice
Why it’s worth doing now in Melby
An open concrete floor joint gets wider every time something heavy crosses it. A sealed joint supports the edges before they need a bigger repair. Around Melby, water from a failed joint in an older stone home can soak into timber and plaster, which is a far bigger job than the sealant.
Combining jobs into one visit generally makes better use of the time than several visits, so it’s worth mentioning everything you’d like done. You’ll get one clear quote for the whole job.
Why book with us
- Quality sealants from Arbo and Everbuild
- Sanitary silicone with an anti-fungal additive in wet areas
- Approved under the ARBOMaster scheme
- One-year guarantee on every job
Read how sealant jobs are priced and our reviews.
When it is not the sealant
A few problems are outside what sealant work can do:
- Bouncy or failing floorboards
- Loose, hollow or cracked tiles, which need a tiler
- Structural movement or subsidence
Not sure which it is? You can drop us a line at info@mrmastic.co.uk and we’ll tell you honestly before booking.
Joints and surfaces we work on
- Thresholds
- Concrete floor joints
- Commercial floors
- Wet room & bathroom floors
- Skirting boards
- Tiled floors
How we quote for floor joint sealing
Jobs vary more than people expect. The main factors:
- The number of rooms or windows
- The number and length of the joints
- Any working-time requirements on site
- Mould in or behind the old joints
Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether the work is at height. Your quote takes all of that into account.
What we need to know
What to tell us when you ask for a quote:
- Pictures of the joints, sent by email
- Roughly how big the job is
- The type of property
- Any access issues, like height or stairs
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we will talk you through what we’d do. Whenever you are ready, email us at info@mrmastic.co.uk.
Common questions in Melby
Do you cover smaller places like Melby?
Yes, Melby is covered. Our work covers the whole of Scotland, islands included, from towns to the smallest places. Longer journeys are simply planned in advance.
Is floor joint sealing in Melby guaranteed?
Every job comes with our 12-month guarantee, wherever it is. We’re also fully insured and ARBOMaster approved.
When can I walk on the floor?
We’ll tell you before we leave. That depends on the product, and walking on it generally comes before mopping or wheeled traffic.
Which products do you use?
It depends on the joint: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. Brands we use include Arbo and Everbuild.
Do you have insurance?
Yes. We are fully insured, and we’ve been doing sealant work for more than 20 years.
Does someone need to be in?
It depends on the job. Inside work needs someone to give us access, and for outside work we’ll agree access with you when we book.
Can you add a movement joint to a tiled floor?
Often, yes. We replace the grout along a suitable line with flexible sealant in a matching colour. If tiles are loose, that needs fixing first.
Will you leave a mess?
Tidy work is part of the job. We protect what’s around the joints.
Different surfaces, different methods
Commercial floors
Washroom and kitchen floors in commercial buildings need sound edge joints. They’re resealed with a flexible, water-resistant sealant.
Thresholds
Thresholds take daily traffic, so we choose a hard-wearing, flexible product.