Essex · England
Floor Joint Sealing in Marks Tey
Our applicators work in Marks Tey on sealing skirting-to-floor joints, tiled floor movement joints and concrete floor joints. Old sealant removed completely, joints prepared properly and every job guaranteed for a year.
- Concrete floor joints that have broken down
- Threshold joints that have opened or worn
- Cracked grout where a tiled floor needs a movement joint
Floor joint sealing in Marks Tey
Thresholds are where two floors, or a floor and a door, meet. We use a flexible product that suits both floors. We work on concrete floor joints, tiled floors and thresholds, and the jobs we see most are skirting caulk that keeps splitting and dirt and water collecting in open floor joints.
Work in a small place like Marks Tey just needs the journey and access planning, and the work itself is the same as on any site.
All of our work is guaranteed for twelve months, in Marks Tey and everywhere else we cover.
- Place
- Marks Tey (CO6)
- Wider area
- Essex
- Cover
- A year, on every job
- Quote
- A clear price before we start
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
How the job changes by surface
Thresholds
Thresholds between rooms meet two floors and often a door frame. We seal them with a flexible sealant that suits both sides.
Concrete floor joints
Concrete floors have sawn or formed joints to control cracking. We reseal them with a floor-joint product suited to the traffic.
Joints and finishes in Marks Tey homes
Across Essex, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and each moves in its own way. That is why the skirting and threshold joints need a flexible seal.
For buildings such as Church of St Andrew, floor and skirting joints in halls and kitchens wear like any others.
Marks Tey is about 6 miles west of Colchester, in Essex. We provide floor joint sealing to homes and businesses in Marks Tey and nearby. Our Essex coverage runs to 644 places, Marks Tey among them. You can also see our page for Chelmsford, about 15 miles away.
We work across CO6 for floor joint sealing and the streets around it. Local streets include London Road, Well Side and Patten Close, and we cover them all. Close by, we work in Little Tey (1 mile west), Easthorpe (1 mile south), Mulberry Green (1 mile south-east), Copford (1 mile east) and Broad Green (2 miles west). Further out, we also cover Colchester (6 miles east), Chelmsford (15 miles south-west), Braintree (9 miles west), Maldon (11 miles south), Witham (8 miles south-west) and Camulodunum (5 miles east).
Local landmarks in Marks Tey
Around Marks Tey, our work takes us to homes and buildings near The Red Lion Public House and the streets around them. For rail, the closest station is Marks Tey station, roughly 0.8 miles north-east of the centre. Nearby you will also find Birch Castle (3.2 miles south-east) and Essex County Hospital (5.3 miles east). Open spaces near Marks Tey include Iron Latch.
What affects the quote in Marks Tey
Every job gets its own quote. These are the things that affect it:
- How easy the joints are to reach
- Whether there’s mould to deal with
- Which sealant suits the joint
- The size of the job
What it costs depends on the size of the job, how much old material has to come out and how easy the joints are to reach. You will have a clear quote before any work starts, so you know where you stand.
Asking for a quote
There’s no need for technical detail. It helps if you can tell us:
- Where the job is, and your postcode
- Any previous sealing or DIY work
- Any access issues, like height or stairs
- What’s wrong with the joints now
Every job is quoted individually, so start by telling us what you need. Just phone 0345 464 0079 or drop us an email with the details, and pictures are welcome.
Leave it or put it right?
Caulk is quick and cheap, but it cracks where the joint moves or gets wet, so the gap reappears. A flexible sealant moves with the floor and keeps the joint sealed. Where a wall is exposed, as many are in small places like Marks Tey, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
Instead of a standard rate, we price the job in front of us: the amount of work, the old material and the access. You’ll know the price before we begin.
Why us?
- Trusted Arbo and Everbuild sealants
- Anti-fungal sanitary silicone in wet areas
- 20+ years of sealant experience
- Tidy, careful work
Take a look at how sealant jobs are priced or customer reviews.
Your questions about floor joint sealing in Marks Tey
Do you cover smaller places like Marks Tey?
Yes, we do. Our work covers London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Do you cover Marks Tey for floor joint sealing?
Yes. Our work covers London and the South East, and Marks Tey is part of that. You can phone 0345 464 0079 or email us and tell us what needs doing, and we’ll give you a clear price.
What causes gaps between the floor and skirting?
Floors shrink and settle, especially in the first year or two and through the heating season pulls the skirting and floor apart. Caulk tends to crack; a flexible sealant does not.
Will you leave a mess?
We keep the work tidy. Nearby surfaces are protected, and we clear up when we are done.
Will I be able to paint over the new joint?
For painted skirting, we use a flexible product that can be painted. Silicone won’t take paint, so we use it where the joint stays unpainted.
Will there be a smell?
Possibly a little. It fades as the sealant cures.
How long does the job take?
It depends on the size of the job, but most jobs take a few hours for most rooms, longer for large commercial floors. We’ll tell you when we quote.
Do you seal floor joints in bathrooms and kitchens?
Yes. These joints get wet every time the floor is cleaned, so a flexible silicone is the right choice.
How it works
Most of a good job is in the preparation, and we do not rush it. Every joint is cleaned and dried before new material goes in. All told, the work takes a few hours for most rooms, longer for large commercial floors. In a small place like Marks Tey, access is usually the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- We start by looking at the floor, the gap and the traffic, then choose the product.
- Whatever is in the joint now, whether caulk, grout or sealant, comes out.
- The joint is cleaned, vacuumed and backed where depth needs controlling.
- The sealant goes in, chosen for the floor and coloured to suit it.
- Finally we tool it smooth and explain when the floor can be used and cleaned.
How to prepare
- Keep pets and children clear of the area while we work
- Mention any sign-in or site rules at work premises
- For indoor joints, keep the area dry beforehand if you can
Getting a quote
There’s no standard price list, as no two jobs are quite the same. Instead, your job gets its own clear quote. To arrange one, call 0345 464 0079 or send us an email.
Read more
Should I try it myself first?
Sealing over old silicone is the commonest DIY error. Silicone does not stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
Common problems we fix in Marks Tey
Grout is rigid, so a tiled floor with nowhere to move cracks along a grout line. You’ll see a crack running along the grout, showing where a movement joint was needed.
If you can see any of these, it’s time to have the joints looked at:
- Caulk that has cracked where the floor moves
- Floor edges that trap water and grime
- Grout cracking in a straight line across a floor
- Chipped and open joints in warehouse floors
Rented homes near Marks Tey station change hands often, and a tidy floor and skirting joint helps a rental look ready for the next tenant.
Questions to ask before booking
- How the joint is cleaned and prepared
- Is the old sealant removed completely?
- Which colour the sealant will be
- Which sealant they’ll use, and why
How to look after the new joints
Joint life depends on how it’s used and looked after. Here’s what we suggest:
- Mark off resealed joints in warehouses
- Avoid sloshing water against skirting
- Don’t slide heavy items over sealed joints
- Get cracks along tile grout lines looked at early
Keep heavy furniture from dragging across the joints. Dragging can tear the bead especially in the first few days.
A gap under the skirting collects dust and lets draughts through. Sealing it early keeps the room cleaner and stops it getting worse.