Essex · England
Remedial Sealant in Marks Tey
Failed sealant joints in Marks Tey need attention? We remove the old material, prepare the joints and seal them properly.
- Gaps opening along the back of the worktop
- Sealant that came away because the surface wasn’t prepared
- Thick, messy sealant smeared over tiles
How the visit works
There isn’t much for you to do on the day. Point us to the joints and we’ll get on with it. The job generally takes a few hours, depending on how many layers have to come out, including the tidy-up. Somewhere as small as Marks Tey, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- Surrounding tiles, trays and frames are protected first.
- Every layer of failed sealant is stripped out.
- We clean and degrease the joint and look for signs of movement or water.
- New sealant goes in once the joint is dry, and is tooled smooth.
- You get the cure time and our view on why the joint failed.
How to prepare
- Mention if the joints have been sealed before
- For business premises, tell us about site rules or sign-in
- Plan for the work area to be out of bounds to pets and children
Getting a quote
We don’t publish a price list. Instead, your job gets its own clear quote. To arrange one, call 0345 464 0079 or drop us an email.
Related advice
Remedial sealant in Marks Tey, done properly
Getting old sealant out properly is slow, careful work. We cut out every layer, clear the residue and degrease the surfaces, without scratching tiles, trays or frames. Only then can new sealant bond. Typical jobs include a shower that leaks however often it’s resealed and floor or wall movement joints that have failed, across shrunken worktop sealant, mouldy bath & shower sealant and failed movement joints.
In a village or hamlet like Marks Tey, homes are often older cottages and farmhouses alongside a few newer houses. Older walls and timber floors can move a little, and cracked grout and split sealant are often the first signs.
The work is covered for a year after we finish. If there’s a problem with it, please ring 0345 464 0079 or drop us an email.
- Place
- Marks Tey (CO6)
- Wider area
- Essex
- Cover
- One year on every job
- Quote
- A clear price before we start
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
What remedial sealant looks like in Marks Tey
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
For an older house near a landmark such as Church of St Andrew, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
Marks Tey is about 6 miles west of Colchester, in Essex. Across the CO6 area, we can carry out remedial sealant at your property. Across Essex, we cover 644 places, Marks Tey among them. Our Chelmsford page covers work nearby, about 15 miles away.
All of CO6 is covered for remedial sealant, from the main roads to the quietest streets. We cover properties on London Road, Well Side and Patten Close. If you are just outside Marks Tey, we cover Little Tey (1 mile west), Easthorpe (1 mile south), Mulberry Green (1 mile south-east), Copford (1 mile east) and Broad Green (2 miles west). Further out, we also cover Colchester (6 miles east), Chelmsford (15 miles south-west), Braintree (9 miles west), Maldon (11 miles south), Witham (8 miles south-west) and Camulodunum (5 miles east).
Local landmarks in Marks Tey
Locally, jobs take us to homes and businesses close to The Red Lion Public House and the streets around them. Marks Tey’s nearest station is Marks Tey station, about 0.8 miles north-east of the centre. A little further out are Birch Castle (3.2 miles south-east) and Essex County Hospital (5.3 miles east). The countryside around Marks Tey includes Iron Latch.
When it is not the sealant
To be straight with you, some problems need a different trade:
- Tiles that have come away from the wall
- A leaking trap, valve or supply pipe
- A tray or bath that is cracked
If in doubt, phone 0345 464 0079 or drop us an email and we will say what we think.
Joints and surfaces we work on
- Expansion joints
- Mouldy bath & shower sealant
- Shrunken worktop sealant
- Botched or over-sealed joints
- Leaking tray & enclosure joints
- Failed movement joints
DIY versus a professional finish
If you’ve already had a go yourself, that is fine. We remove it and do the joint properly, so tell us about it when you ask for a quote.
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
When to call us in Marks Tey
Joints that move need sealant that can stretch. A bath that flexes, a tray that rocks or a building joint that opens and closes will split a rigid or thin bead.
People generally contact us after spotting something like this:
- Over-sealed joints coming away
- Kitchen joints letting water behind the worktop
- Wide, uneven beads that look worse than the old ones
- A shower that leaks however often it’s resealed
If you let a flat or house near Marks Tey station, a joint that keeps failing is best fixed properly while the property is empty.
Comparing quotes
- How hidden problems are handled
- Whether VAT is included
- The length of the guarantee
- What insurance they hold
Work for landlords, hotels and businesses
If you manage several properties in or around Marks Tey, several properties can go on one quote. Send us the addresses and the work at each.
Hotels need rooms back in use, so the work can be planned room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.
Marks Tey: your questions answered
Can you do remedial sealant in Marks Tey?
Yes, Marks Tey is within the area we cover. We work across London and the South East. You can phone 0345 464 0079 or send us an email and tell us what needs doing.
Is Marks Tey within the area you cover?
Yes, smaller places are covered as well as towns. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Can I add another job to the visit?
Yes. Tell us about everything you’d like done.
Can I do it myself?
It depends on the job. High-level, external movement and fire-rated joints are professional jobs, while a short indoor joint may be within reach.
How long does the work take?
That depends on how many layers there are and how many joints. You will have a timescale before any work begins.
Can you remove old sealant without damaging the bath?
Yes. The old bead is cut and lifted with tools that suit the surface, and the residue is cleaned away. Any existing damage is pointed out before we start.
When is the sealant fully cured?
Most sealants are touch-dry well before they’re fully cured. We will give you the cure time for the product we used.
What sealant do you use?
We choose the sealant for the joint, not the other way round. Movement, water and weather all affect the choice, and we will explain our choice.
Also near Marks Tey
More services for Marks Tey
How to look after the new joints
No joint lasts for ever, but care makes a real difference. Our tips:
- Look for stains below bathrooms now and then
- Act on a lifting corner straight away
- Check trays and worktops do not move
- Clean sealant with mild products only
If we’ve found a cause, such as a loose tray or a leaking waste, get it fixed, because the new sealant cannot hold back a problem underneath.
Movement joints that have split let water into the structure, and the longer it’s left, the more the joint edges break down. Resealing while the edges are sound is simpler.
How the job changes by surface
Windows & doors
Smeared or badly matched mastic can be cut out and redone neatly, in a colour that suits the frame.
Over-sealed & botched joints
Every layer has to come out, and silicone residue is cleaned off the tiles too. Only a clean joint will take a new bead.