Essex · England
Marks Tey Fire Rated Sealant
Intumescent and fire-rated sealant around gaps, frames and service penetrations for Marks Tey, backed by a one-year guarantee. Call for a quick quote.
- Gaps around pipes and cables through fire-resisting walls
- Fire stopping disturbed by later work
- Holes left by a change of layout
About our fire rated sealant in Marks Tey
Ordinary silicone or decorators’ caulk in a fire-stopping gap isn’t a fire-rated seal. We cut out the wrong material and reseal with a fire-rated product tested for that kind of gap. We are often asked to deal with gaps where walls meet ceilings or slabs and gaps around pipes and cables through fire-resisting walls, on pipe & cable gaps, linear gaps and plasterboard & masonry.
For holiday lets, converted business premises or a community building near Marks Tey, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.
The work is covered for a year after we finish. If there’s a problem with it, please ring 0345 464 0079 or drop us an email.
- Where
- Marks Tey (CO6)
- Wider area
- Essex
- Guarantee
- A year, on every job
- Quote
- A clear price before any work starts
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
DIY sealant or a professional job?
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, then guaranteed for a year.
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Why deal with it now?
Doing it once, properly, beats doing it twice. If the details weren’t followed, the seal may need redoing when the building is next checked. Around Marks Tey, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
Homes and businesses are quoted the same way: the amount of work, the access and the products needed, plus any working-time requirements on site. Ask us for a quote and we will go through it with you.
Why book with us
- We never seal over old sealant
- 4.9 on Google from 180+ five-star reviews
- Domestic, commercial and hotel work
- Anti-fungal sanitary silicone in wet areas
Take a look at what affects the cost or what customers say.
Nearby places to Marks Tey
Other services in Marks Tey
Your questions about fire rated sealant in Marks Tey
Do you cover Marks Tey for fire rated sealant?
Yes. Our work covers London and the South East, and Marks Tey is part of that. Just call 0345 464 0079 or drop us an email with a few details of the job.
Is Marks Tey within the area you cover?
Yes, Marks Tey is covered. We work across London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
How long does the job take?
Most jobs take anything from a few hours to several days, depending on how many gaps there are, including the preparation. Your quote will say how long we expect yours to take.
Is the work guaranteed?
Yes, always. There’s a 12-month guarantee on every job.
Can new sealant go over the old?
No, and we never do. It may look fine at first, but the new bead soon lifts. The old sealant has to come out completely.
Will there be a smell?
Some sealants have a smell while they cure. Ventilation helps.
Is it messy?
We keep the work tidy. Nearby surfaces are protected.
Can you tell me which gaps need fire stopping?
No. We follow the requirements from your assessor, designer or building control and install to the manufacturer’s details.
How it works
When we arrive, we look over the joints with you first, so there are no surprises. We protect the surfaces around the joints before we start. The work generally takes from a few hours to a few days, depending on the number of gaps and the access. For a village or hamlet like Marks Tey, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- Access to each area is agreed so the work can run in order.
- Old, damaged or unsuitable sealant is removed.
- Gaps are cleaned of dust and loose material.
- The fire-rated or intumescent sealant is applied and tooled to the tested detail.
- Locations and products are written up and any gaps unsuitable for sealant are flagged.
How to prepare
- Mention if the joints have been sealed before
- Try not to wet indoor joints just before the visit
- Clear items away from the joints we are working on
Ask for a quote
We quote each job on its own. Just call 0345 464 0079 or email us with the details.
Advice
When it isn’t the sealant
Some problems need a builder, plumber or other trade rather than us:
- Assessing a building’s fire safety
- Big openings where sealant alone is not the tested solution
- Issuing a fire rating or certificate for a building
Not sure which it is? You can ring 0345 464 0079 or email us and we’ll tell you honestly before you book.
What we seal
- Service penetrations
- Pipe & cable gaps
- Door frames
- Plasterboard & masonry
- Linear gaps
- Flats & HMOs
Looking after it afterwards
Looking after new joints is easy:
- Make resealing part of every contractor’s brief
- Allow for resealing whenever new services are run
- Include hidden areas like risers in routine checks
- Report cracked or damaged seals as soon as you notice them
Don’t add foam, filler or ordinary sealant over a fire seal. Repairs should use a matching fire-rated product. We can tell you which product we used.
An open gap isn’t only a fire issue: noise, draughts and even pests can come through too. Sealing them early helps on every front.
Common problems we fix in Marks Tey
Buildings are refitted and reconfigured over the years. A house turned into flats or an HMO, or an office split into smaller units, brings new walls, new service routes and new gaps.
People usually contact us when they notice something like this:
- New service routes left unsealed after building work
- Seals cut through by electricians, plumbers or data installers
- Fire seals that have cracked with movement
- Door frames with gaps between frame and wall
Rented homes near Marks Tey station change hands often, and fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through.
What your quote should include
- Which sealant they’ll use, and why
- Whether you can choose the colour
- Whether they seal over old material or remove it
- How the surfaces are prepared before sealing
For landlords and businesses
If you manage several properties in or around Marks Tey, several properties can be quoted together. Just tell us the addresses and what each one needs.
In hotels, rooms out of use cost money, so the work can be planned room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.
What fire rated sealant looks like in Marks Tey
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
Community buildings like Church of St Andrew are part of the picture too: service openings in its walls need the right fire-rated sealant, as in any building.
Marks Tey is about 6 miles west of Colchester, in Essex. Jobs in Marks Tey get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. Our Essex coverage runs to 644 places, and Marks Tey is one of them. Our Chelmsford page covers work nearby.
Work in CO6 works the same way as everywhere else we cover. You will find streets such as London Road, Well Side and Patten Close, and we cover them all. Nearby, we also carry out fire rated sealant in Little Tey (1 mile west), Easthorpe (1 mile south), Mulberry Green (1 mile south-east), Copford (1 mile east) and Broad Green (2 miles west). Larger places within reach include Colchester (6 miles east), Chelmsford (15 miles south-west), Braintree (9 miles west), Maldon (11 miles south), Witham (8 miles south-west) and Camulodunum (5 miles east).
Landmarks near Marks Tey
Locally, jobs take us to homes and businesses close to The Red Lion Public House. The closest station to Marks Tey is Marks Tey station, about 0.8 miles north-east. Nearby you’ll also find Birch Castle (3.2 miles south-east) and Essex County Hospital (5.3 miles east). The countryside around Marks Tey includes Iron Latch.