Essex · England
Glazing Silicone in Marks Tey
Glazing silicone for conservatories, rooflights, glass panels and shower screens for homes and businesses in Marks Tey and across Essex. Fully insured, ARBOMaster approved and guaranteed for a year.
- Water running down inside the glass
- Glass-to-glass joints that have split
- Black or yellowed silicone on glass joints
What glazing silicone looks like in Marks Tey
Rainfall in the South East is lower than in much of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind. With historic houses such as Layer Marney Tower (about 3.9 miles south) nearby, there’s older building stock in the area around Marks Tey as well as newer homes. In older buildings, older timber frames in brick or stone need a different approach from a modern uPVC window.
For landlords with property near Marks Tey station, a shower screen or conservatory joint that leaks is easier to reseal while the property is empty. In the older streets around Church of St Andrew, frames set in older brick or stone need a sealant that suits the wall as well as the frame.
Marks Tey is about 6 miles west of Colchester, in Essex. We provide glazing silicone to homeowners, landlords and businesses in Marks Tey. Marks Tey is one of 644 towns and villages in Essex where we work. Our Chelmsford page covers work nearby, about 15 miles away.
Postcode districts we cover here for glazing silicone: CO6. You’ll find streets such as London Road, Well Side and Patten Close, and we cover them all. If you are just outside Marks Tey, we cover Little Tey (1 mile west), Easthorpe (1 mile south), Mulberry Green (1 mile south-east), Copford (1 mile east) and Broad Green (2 miles west). We also work in nearby towns such as Colchester (6 miles east), Chelmsford (15 miles south-west), Braintree (9 miles west), Maldon (11 miles south), Witham (8 miles south-west) and Camulodunum (5 miles east).
Landmarks near Marks Tey
Typical jobs here are in homes near The Red Lion Public House, among other places. The closest station to Marks Tey is Marks Tey station, about 0.8 miles north-east of the centre. Well-known places in the area include Birch Castle (3.2 miles south-east) and Essex County Hospital (5.3 miles east). Green spaces nearby include Iron Latch.
Glazing silicone in Marks Tey
Glass, frames and walls all move at different rates, and the silicone between them takes the strain. When it cracks or lets go, water gets in. We cut it out and reseal with a glazing silicone suited to the joint. Typical jobs include silicone pulling away from the glass and sealant that was laid over old silicone and failed, across rooflights, glass-to-frame joints and glass-to-glass joints.
Mastic can only go onto a dry, clean joint, so window work in Marks Tey is booked around the forecast. Tell us about access to every side of the house, including upper-floor windows.
Big or small, you get the same 12-month guarantee in Marks Tey and across Essex.
- Location
- Marks Tey (CO6)
- Region
- Essex
- Guarantee
- A year, on every job
- Quotes
- A clear quote up front
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
What we do, step by step
On the day, we look over the joints with you first, so you know exactly what we’re doing. Surfaces next to the work are protected before any work begins. Most jobs take a few hours, depending on how many joints need doing. Somewhere like Marks Tey needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- First we agree the joints to be done.
- Old sealant is removed from the glass and frame.
- The surfaces are cleaned with a suitable solvent.
- New glazing silicone goes in and is finished neatly.
- The joints are checked before we leave.
Before we arrive
- Try not to wet indoor joints just before the visit
- Tell us about any water getting in
- Let us know about parking restrictions
How to get a quote
Getting a quote is simple: tell us what needs doing and where, and roughly how big it is. A few pictures by email make the job easier to understand, and we’ll take it from there.
Related advice
For landlords and businesses
Letting agents often deal with us directly. Tell us the address, the job and how access works and we will quote.
If you manage several properties in or around Marks Tey, jobs at different addresses can go on one quote. Just tell us the addresses and what each one needs, and photos by email help.
When something else is needed
Honest advice matters more to us than a booking, so here’s what sealant cannot fix:
- A frame that needs repairing or replacing
- A roof that has moved or dropped
- A broken pane or roof panel
If in doubt, ring 0345 464 0079 or email us and we will say what we think before booking.
Joints and surfaces we work on
- Glass-to-glass joints
- Glass-to-frame joints
- Conservatory frames
- Glass balustrade bases
- Shower screens
- Rooflights
Surface by surface
Shower screens
Silicone holds the water in on frameless screens. We reseal without scratching the glass.
Conservatory frames
Exposed frame joints wear with the weather. Renewed sealant keeps water out.
How we quote for glazing silicone
Jobs vary more than people expect. What affects the quote:
- When we can work, for business premises
- How easy the joints are to reach
- The number and length of the joints
- Whether old sealant or filler has to be cut out
Leaving a failed joint usually makes the job bigger, not smaller, because water and mould keep working on it. If you are not sure whether it needs doing, phone 0345 464 0079 or drop us an email for an honest opinion and a quote.
What we need to know
There’s no need for technical detail. It helps if you can tell us:
- The problem you’ve noticed
- If someone has resealed it before
- The address or postcode of the job
- Whether it’s a home or a business
We do not publish a price list, as no two jobs are quite the same. Instead, we give you a clear quote for your job. To get started, ring 0345 464 0079 or email us.
Towns and villages near Marks Tey
Also in Marks Tey
Why act early in Marks Tey
Topping up old silicone can look like a fix, but silicone doesn’t stick to silicone, and the leak usually returns. A proper reseal is the lasting answer. Where a wall is exposed, as many are in small places like Marks Tey, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
Every job is a little different, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all make a difference, and we will explain the quote if you ask.
Why book with us
- A choice of colours where the product allows
- Domestic, commercial and hotel work
- A 12-month guarantee on all work
- Old sealant always removed completely
Take a look at what affects the cost and what customers say.
Your questions about glazing silicone in Marks Tey
Will you come out to Marks Tey?
Yes, Marks Tey is covered. Our work covers London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
Do you work for landlords with property near Marks Tey station?
Yes, we work for letting agents and landlords. Just ring 0345 464 0079 or email us and tell us about the property, and we’ll give you a clear quote.
Are you ARBOMaster approved?
Yes. We’re approved under the ARBOMaster scheme, the approved applicator scheme for Arbo sealants.
Is there any odour?
Possibly a little. It fades as the sealant cures.
How long should I leave it?
Many sealants skin over quickly but take longer to cure fully. We will give you the cure time for the product we used before we leave.
How much does glazing silicone cost in Marks Tey?
We don’t publish prices, because the cost depends on the job: its size, the old material, access and the product needed. We agree the price before any work begins.
What do you put in the joint?
We choose the sealant for the joint, not the other way round. Movement, water and weather all affect the choice.
How long will you be here?
As a guide, most jobs take anything from an hour or two to most of a day, depending on the size of the job. Larger jobs naturally take longer, and we’ll tell you how long to expect.
DIY versus a professional finish
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it doesn’t work out, we can still put it right.