Moray · Scotland
Lintmill Floor Joint Sealing
Problem with your floor joints in Lintmill? We remove the old material, prepare the joints and seal them properly, and the work is guaranteed for a year.
- Skirting caulk that keeps splitting
- Rigid edge joints in tiled floors
- Open gaps along the bottom of skirting boards
Floor joint sealing in Lintmill: local notes
Across Moray, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and they don’t all move the same way. That is why the skirting and threshold joints need a flexible seal. Many new homes in Scotland are timber-framed, and as the frame dries and settles, skirting and sealant joints can open up.
For buildings such as St Mary's Collegiate Church, joints in its floors, skirtings and thresholds need resealing as they wear.
Lintmill is about 6 miles east of Buckie, in Moray. Across the AB56 area, we cover floor joint sealing for homes and businesses. We cover 58 towns and villages across Moray. There’s also a page for Aberdeen, roughly 44 miles from Lintmill.
We work across AB56 for floor joint sealing. If you are just outside Lintmill, we cover Cullen (1 mile north), Sandend (2 miles east), Portknockie (3 miles north-west), Fordyce (3 miles east) and Findochty (4 miles north-west). Larger places within reach include Buckie (6 miles west), Keith (11 miles south-west), Fochabers (11 miles south-west), Ianstown (5 miles west), Lhanbryde (15 miles west) and Portessie (5 miles west). For island and remote addresses, a little more planning is needed, so let us know when you get in touch.
Local landmarks in Lintmill
Other landmarks nearby include Campbell Hospital (4.2 miles east) and castle 30m NNW of Inaltry (1.5 miles south). For a walk, there’s Durn Hill.
Floor joint sealing in Lintmill, done properly
Wet-area floor joints keep water out of the gap behind skirting and plinths. A flexible silicone seal keeps it out and stops dirt collecting. We work on tiled floors, concrete floor joints and wet room & bathroom floors, and people most often call us about skirting that has pulled away from the floor and threshold joints that have opened or worn.
Work in a place like Lintmill is planned ahead, journey included. Outdoor plot mastic needs dry weather, but indoor floor and skirting joints can be sealed whatever the forecast.
We guarantee the work for a year. If something isn’t right with it in that time, tell us and we’ll put it right.
- Location
- Lintmill (AB56)
- Region
- Moray
- Cover
- A year, on every job
- Quotes
- A clear price before we start
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Other services in Lintmill
DIY versus a professional finish
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
The biggest DIY mistake is sealing over old sealant. Silicone does not stick to old silicone, so it peels away and traps moisture behind it. All the old material has to come out first.
What the job involves on each surface
Thresholds
A threshold is where floors and frames meet. A flexible sealant suits both floor finishes.
Wet room and bathroom floors
Bathroom floor edges get wet at every clean. A flexible seal stops water running into the gap.
Looking after it afterwards
Joint life depends on how it’s used and looked after. Here’s what we suggest:
- Walk round the room once a year and look at the edges
- Cone off fresh joints until they’re ready
- Act on grout cracks that run in a straight line
- Sweep along the edges of the floor
Have a look at the joints once the heating season is over. If anything has opened, it’s easy to reseal early on.
Once concrete joint edges start to break, wheels make it worse. Sealing them early protects the edges and the surface smoother.
Landlord and commercial work in Lintmill
From a single let to a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
A neglected joint can let water reach the structure, which is a bigger problem in a rented property. Resealing at the right time is simple maintenance that we can handle for you.
When it is not the sealant
Some problems need a builder, plumber or other trade rather than us:
- Concrete repairs beyond the joint
- Large cracks that need a surveyor
- Water getting under the tiles from elsewhere
Not sure which it is? You can email us at info@mrmastic.co.uk and we’ll tell you honestly.
Where we work in Lintmill
- Skirting boards
- Commercial floors
- Tiled floors
- Wet room & bathroom floors
- Thresholds
- Concrete floor joints
Common questions in Lintmill
Is Lintmill within the area you cover?
Yes, smaller places are covered as well as towns. We work across all of Scotland. Let us know about access, parking and anything unusual about getting there when you book.
Is Lintmill in your area for floor joint sealing?
Yes, Lintmill is within the area we cover. Our work covers the whole of Scotland. You can email us at info@mrmastic.co.uk and let us know what needs doing, and we’ll give you a clear price.
Can you seal over the old sealant?
No, and we never do. It can look neat for a few weeks, but the new layer lifts away from the old one. Removing the old sealant completely is the only lasting way.
How much does floor joint sealing cost in Lintmill?
It depends on the job, so we quote each one individually. To get one, drop us a line at info@mrmastic.co.uk with a short description of the job.
Do you take out the old sealant first?
Always. Sealing over the old bead is the commonest cause of early failure, so we never do it.
Can I choose the sealant colour?
In most cases you can choose. We will explain which colours are available.
Do you work on commercial floors?
Yes. We clean out the joints and reseal them with a product suited to the floor. Tell us what runs over the floor.
Will I be able to paint over the new joint?
It depends on the sealant, so let us know first. Joints that will be painted get a paintable product and wet areas get silicone.
What we do, step by step
Good joint work is mostly preparation, and we do not rush it. Every joint is cleaned and dried before new material goes in. All told, the work takes a morning or an afternoon for most homes. In smaller Scottish places, parking is generally less of an issue than access and distance. Tell us how to find the property and how to reach the work, and the visit is planned around that.
- The room is cleared along the joints so we can reach them.
- We take out the cracked caulk, grout or old sealant.
- Edges are cleaned and dried.
- A flexible sealant suited to the floor is applied and tooled.
- Finally, we check the work and talk you through aftercare.
How to prepare
- Tell us about any water getting in
- Keep children and pets away from the work area
- Clear the area around the work
How to get a quote
Getting a quote is simple: let us know what needs doing and where, and roughly how big it is. A few pictures by email make the job easier to understand, and we’ll come back to you with a quote.
Read more
Common problems we fix in Lintmill
A floor laid tight to the walls has no room to move. As it expands, the edges lift or crack.
The most common problems we see are:
- Gaps at thresholds between rooms
- Gaps opening between the floor and skirting
- Floor edges that trap water and grime
- Skirting caulk that keeps splitting
Around Lintmill, as everywhere, floor joint sealing is only as good as the preparation behind it.
What your quote should include
- How the surfaces are prepared before sealing
- What product goes in the joint
- What the cure time is
- How hidden problems are handled