West Sussex · England

Floor & skirting joints in Kingston Gorse, West Sussex

Floor joint sealing in Kingston Gorse from a team with over 20 years’ experience. Rated 4.9 on Google from 180+ five-star reviews.

  • Failed seals where bathroom floors meet baths and panels
  • Cracked grout where a tiled floor needs a movement joint
  • Grout used at the floor edge instead of sealant

Trusted floor joint sealing in Kingston Gorse

Floor joint sealing around Kingston Gorse

Floors around West Sussex run from suspended timber in older homes to concrete in newer houses and units, and each moves in its own way. That’s why the skirting and threshold joints need a flexible seal.

Schools such as Ferring CofE Primary School are buildings too, and floor and threshold joints in busy corridors wear quickly and are best resealed early. Rented homes near Goring-By-Sea station change hands often, and gaps at skirtings and thresholds are worth sealing between tenancies. For buildings such as St Andrew's Church, joints in its floors, skirtings and thresholds need resealing as they wear.

Kingston Gorse is about 3 miles south-west of Worthing, in West Sussex. Every kind of property in Kingston Gorse is covered for floor joint sealing, old or new, large or small. Every job comes with our 12-month guarantee. Kingston Gorse is one of 371 places in West Sussex where we work for floor joint sealing. Our Brighton page covers work nearby (14 miles or so).

Jobs for floor joint sealing in BN16 is quoted and booked the same way as anywhere else. Streets in the area include Middle Way, Gorse Avenue and Sea Lane, and we cover them all. Nearby, we also carry out floor joint sealing in West Kingston (1 mile west), Ferring (1 mile north-east), Angmering-on-Sea (1 mile west), East Preston (1 mile north-west) and Hangleton (1 mile north). Within a short drive, we also cover Worthing (3 miles north-east), Bognor Regis (10 miles west), Chichester (14 miles west), Selsey (15 miles west), Littlehampton (3 miles west) and Shoreham-by-Sea (9 miles east).

Landmarks near Kingston Gorse

Locally, jobs take us to homes and businesses close to Chatsmore Catholic High School. Kingston Gorse’s nearest station is Goring-By-Sea station, about 1.5 miles north-east. A little further out are Zachary Merton Hospital (1.8 miles west) and Rustington Museum (2 miles west). For a walk, there’s Highdown Hill.

Map of Kingston Gorse © OpenStreetMap contributors

Floor joint sealing for homes and businesses in Kingston Gorse

A threshold joint has to cope with feet, movement and sometimes water. We seal them with a flexible sealant suited to the floor finishes either side. If you’re dealing with chipped and open joints in warehouse floors and skirting that has pulled away from the floor, we can help, on tiled floors, wet room & bathroom floors and commercial floors alike.

Work in a small place like Kingston Gorse just needs the journey and access planning, and once on site, the job is the same as anywhere.

There’s a 12-month guarantee on every job, whatever its size.

Place
Kingston Gorse (BN16)
Wider area
West Sussex
Cover
A year, on every job
Quotes
A clear price before any work starts
Telephone
0345 464 0079
Page updated
26 October 2026
Mr Mastic applicators lined up beside the company vans, one holding a sealant gun

For landlords and businesses

We regularly work with letting and managing agents. Tell us the address, the job and how access works and we will give you a quote.

We work for landlords and agents as well as homeowners. Sealant work between tenants is a simple way to keep a property in good order.

Surface by surface

Skirting boards

On painted skirting, we can use a flexible sealant that takes paint. Where water is involved, silicone is the better choice.

Wet room and bathroom floors

Mop water gets into any open joint at the edge of a bathroom floor. A neat silicone joint keeps it out.

What affects the cost of floor joint sealing

Every job gets its own quote. This is what makes a difference:

  • The product the joint needs
  • The number and length of the joints
  • The number of rooms or windows
  • Whether there’s mould to deal with

What you pay reflects the work, not a rough estimate. That is why we ask a few questions first.

What to tell us for a quote

What to tell us when you ask for a quote:

  • Roughly how big the job is
  • Any previous sealing or DIY work
  • Access, such as stairs, a lift or height
  • Whether it’s a home or a business

Getting a quote is simple: let us know the job and the location. Photos by email help us understand the job, and we’ll take it from there.

Why deal with it now?

Leaving skirting gaps until the next decorating job lets dirt and draughts in. It’s a quick job to seal them now for most homes. Around Kingston Gorse, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.

Combining jobs into one visit usually makes better use of the time than several visits, so it’s worth mentioning everything you’d like done. We will send you a clear quote for the lot.

Why choose Mr Mastic in Kingston Gorse

  • A 12-month guarantee on all work
  • We never seal over old sealant
  • Sealant colour chosen to suit
  • White, clear, grey or coloured to suit, where the product allows

Read what affects the cost or what customers say.

FAQs for Kingston Gorse

Is Kingston Gorse within the area you cover?

Yes. Kingston Gorse is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.

Is Kingston Gorse in your area for floor joint sealing?

Yes, Kingston Gorse is within the area we cover. Our work covers London and the South East. Just phone 0345 464 0079 or email us with a few details of the job, and we’ll give you a clear quote.

Do you hold any approvals?

Yes. We are an ARBOMaster approved applicator, which is run for the Arbo sealant brand.

Can I do it myself?

Sometimes. The key is preparation: remove all the old material and work on a clean, dry joint. We can always put it right if it fails.

Is the work guaranteed?

Yes: twelve months. If anything isn’t right with the work within the year, let us know and we will sort it.

Can you quote for more than one area?

Yes. Just list everything you need and we’ll quote it together.

Is it messy?

No. We protect the surfaces around the joints, and we tidy up before we go.

Can you seal over the old sealant?

No. New silicone will not bond to old silicone, and anything trapped underneath, including mould and water, stays there. It all has to come out first.

The process

When we get to you, we check the joints match what you told us. If anything is different, we explain it before carrying on. After that, the work takes a few hours, depending on the length of joint. Somewhere as small as Kingston Gorse, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.

  1. First, the floor type, the gap and the traffic are checked.
  2. Any old caulk, grout or sealant is raked or cut out.
  3. We vacuum out the joint and add backing where the depth needs setting.
  4. The chosen sealant goes in, coloured to suit the floor.
  5. We tool it neatly and tell you when it can be walked on and cleaned.

Preparing for the visit

  • Tell us about any water getting in
  • Clear items away from the joints we’re working on
  • Mention any tricky access

Ask for a quote

Want a quote for floor joint sealing? Please call 0345 464 0079 or email us and tell us about the job. We will explain what we’d do and give you a clear price before any work starts.

Ask for a quote

Related advice

What we can’t put right

A few problems are outside what sealant work can do:

  • Concrete repairs beyond the joint
  • Large cracks that need a surveyor
  • Tiles that have lifted or broken

If you are not sure, just ring 0345 464 0079 or send us an email and we will give you a straight answer before booking.

What we seal

  • Skirting boards
  • Concrete floor joints
  • Tiled floors
  • Commercial floors
  • Wet room & bathroom floors
  • Thresholds

Keeping the joints in good condition

So the new joints stay in good condition:

  • Vacuum floor joints regularly to stop grit building up
  • Avoid sloshing water against skirting
  • Look at floor joints each spring
  • Lift furniture rather than dragging it across joints

Do not paint over silicone. If you plan to paint, we’ll use a paintable product.

In wet areas, an open floor joint lets water reach the subfloor. Resealing early keeps it out.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job