West Sussex · England

Floor Joint Sealing in Goring-by-Sea

Floor joint sealing across Goring-by-Sea and nearby, with old sealant always removed completely and a 12-month guarantee.

  • Floor edges that trap water and grime
  • Open joints around bathroom floor edges
  • Grout cracking in a straight line across a floor

Book floor joint sealing in Goring-by-Sea

Floor joint sealing for homes and businesses in Goring-by-Sea

In kitchens and bathrooms, the joint where the floor meets a bath panel, plinth or skirting takes mop water every day. We seal them with a flexible, water-resistant sealant and stops dirt collecting. If you have floor edges that trap water and grime and gaps between floors and kitchen plinths, we can help.

Homes around Goring-by-Sea range from older cottages to newer houses, and their floors range just as widely, from timber that moves with the seasons to tiles laid on concrete. The sealant at skirtings and thresholds has to suit the floor it meets.

Every job comes with a 12-month guarantee.

The Mr Mastic team in navy uniforms in front of three Mr Mastic vans
Where
Goring-by-Sea (BN12, BN99, BN13)
Wider area
West Sussex
Cover
A year, on every job
Quote
Quoted before any work starts
Call
0345 464 0079
Updated
26 October 2026

Do you need floor joint sealing in Goring-by-Sea?

A floor laid tight to the walls has no room to move. It pushes against the walls and skirting as it expands and joints fail.

Any of these means the joints need attention:

  • Failed seals where bathroom floors meet baths and panels
  • Threshold joints that have opened or worn
  • Grout used at the floor edge instead of sealant
  • Skirting caulk that keeps splitting

If you let a flat or house near Goring-By-Sea station, a tidy floor and skirting joint helps a rental look ready for the next tenant.

Before booking anyone

  • What product goes in the joint
  • How long the guarantee is
  • How long to leave it before use
  • What insurance they hold

Choosing a sealant specialist

Questions from Goring-by-Sea

Can you help a landlord with a rental near Goring-By-Sea station?

Yes, we work for landlords and letting agents. You can ring 0345 464 0079 or email us with the address and a few details, and we will give you a fixed price before work begins.

Do you cover smaller places like Goring-by-Sea?

Yes, smaller places are covered as well as towns. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.

Will I be able to paint over the new joint?

On joints you want to paint, yes. Silicone does not take paint, so tell us your plans.

Do you seal kitchen plinths to the floor?

Yes. Wet-area floor joints are sealed with a flexible, water-resistant silicone to keep mop water out.

What does floor joint sealing cost?

There’s no set price, as it depends on the job: its size, the old material, access and the product needed. We agree the price before any work begins.

Do you work on commercial floors?

Yes. Old filler is cleaned out and the joint resealed with a floor-joint product. Tell us what runs over the floor when you ask for a quote.

Can I do it myself?

Some simple jobs can be done by a careful DIYer. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.

How long does floor joint sealing take?

As a guide, most jobs take a few hours for most rooms, longer for large commercial floors. Larger jobs naturally take longer, and we’ll tell you how long to expect.

Aftercare tips

How long the joints last depends on use and care. We suggest:

  • Keep caulk for dry, still joints only
  • Keep floor cleaning water to a minimum at the edges
  • Check the sealant is paintable before decorating
  • Act on grout cracks that run in a straight line

Follow the cure time before walking on or cleaning the joint. Light foot traffic is normally fine sooner than wet cleaning or wheels, and we will tell you both.

Small gaps are quick to seal. Ignored, they fill with dirt and open further over time.

DIY sealant or a professional job?

If you’ve already had a go yourself, that’s fine. We cut it out and start again, so just mention it when you contact us.

Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.

When something else is needed

We’d rather tell you now than do work that will not last, so here’s what sealant cannot put right:

  • Floors that are uneven or need levelling
  • Damaged concrete that needs breaking out and repairing
  • A tiled floor that needs relaying

If you’re not sure, just call 0345 464 0079 or email us and we’ll give you a straight answer before you book.

Joints and surfaces we work on

  • Wet room & bathroom floors
  • Thresholds
  • Skirting boards
  • Tiled floors
  • Concrete floor joints
  • Commercial floors

What happens on the day

A visit follows a simple pattern: we check the joints, mask and protect the surrounding surfaces, do the work and clear up. Most jobs take a morning or an afternoon for most homes. Parking around Goring-by-Sea is normally easier than in a town centre, but mention any lanes, gates or long drives. If the job is outside, tell us about side access and how high the joints are.

  1. We look at the gap and the floor type and agree the right sealant.
  2. We take out any old caulk, sealant or grout along the line.
  3. We clean and vacuum the joint and fit backing where the depth needs setting.
  4. We apply a flexible sealant, or a floor-joint product on concrete, in a suitable colour.
  5. Finally we tool it smooth and explain when the floor can be used and cleaned.

How to prepare

  • Move anything stored near the joints
  • Mention if the joints have been sealed before
  • Let us know if you’ve seen damp or leaks

Getting a quote

For a quick quote, get us on the phone, or email us if that is easier. Tell us about the joints that need doing and we will talk you through the work and send you a clear quote.

Ask for a quote

Related advice

Floor joint sealing around Goring-by-Sea

Across West Sussex, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and they do not all move the same way. That’s why the skirting and threshold joints need a flexible seal.

Schools such as Goring-By-Sea CofE (Aided) Primary School are buildings too, and floor joints in corridors, halls and entrances take heavy wear and need resealing before the edges break up. For buildings such as St Mary's Church, floor and skirting joints in halls and kitchens wear like any others.

Goring-by-Sea is about 1 mile south-west of Worthing, in West Sussex. Whether you are in the middle of Goring-by-Sea or further out, we cover floor joint sealing for every kind of property. Our West Sussex coverage runs to 371 places, Goring-by-Sea among them. You can also see our page for Brighton, roughly 13 miles from Goring-by-Sea.

Postcode districts we cover here for floor joint sealing: BN12, BN99 and BN13. Whether your property is on Sea Lane, Jupp's Lane and Goring Road or anywhere close by, we can help. Other places close to Goring-by-Sea include Ferring (1 mile west), Hangleton (1 mile west), Kingston Gorse (2 miles west), Durrington (2 miles north) and West Kingston (2 miles west). Further out, we also cover Bognor Regis (12 miles west), Littlehampton (5 miles west), Shoreham-by-Sea (7 miles east), Lancing (5 miles east), Rustington (4 miles west) and Storrington (8 miles north).

Near you in Goring-by-Sea

In Goring-by-Sea, that means homes and buildings near Durrington Minature Railway, Chatsmore Catholic High School and Worthing College and the streets around them. The closest station to Goring-by-Sea is Goring-By-Sea station, about 0.5 miles north-west. A little further out are Museum of Sussex Folklore (1.6 miles north-east) and The Acre (1.8 miles east). Not far away are Highdown Hill.

Map of Goring-by-Sea © OpenStreetMap contributors

What affects the quote in Goring-by-Sea

Your quote is based on your job. We take into account:

  • Mould in or behind the old joints
  • Access and height
  • How many areas need sealing
  • The old material and how stubborn it is

The cost reflects the work involved, not guesswork. That is why we ask about the job first.

What to tell us for a quote

When you contact us, these details help:

  • Photos by email, if that’s easy
  • Where the property is
  • Any access issues, like height or stairs
  • Whether it’s a home or a business

If you are in Goring-by-Sea and need floor joint sealing, ring 0345 464 0079 or drop us an email. A short description of the job and where it is helps us quote, and we’ll agree the price before any work begins.

Why deal with it now?

The right product depends on the floor and the traffic: flexible sealant for skirting and tiles, silicone in wet areas, and floor-joint products for concrete. Using the wrong one is why many floor joints fail. In an older home around Goring-by-Sea, damp from a failed joint can get into timber and plaster, and that’s a much bigger job than renewing the sealant.

Instead of a standard rate, we look at what your job involves: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.

What you get with us

  • Fully insured
  • We never seal over old sealant
  • Arbo and Everbuild products
  • Colour agreed with you before work begins

Read how sealant jobs are priced or our reviews.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job