Argyll and Bute · Scotland
Kilmartin Floor Joint Sealing
Sealing skirting-to-floor joints, tiled floor movement joints and concrete floor joints for Kilmartin, backed by a 12-month guarantee. Call for a quick quote.
- Cracked caulk along skirting in bathrooms and kitchens
- Open joints around bathroom floor edges
- Floor edges that trap water and grime
Floor joint sealing in Kilmartin
Painted skirting can be sealed with a flexible product that can be painted over. For bathrooms and kitchens, silicone is normally the better choice. If you are dealing with concrete floor joints that have broken down and worn sealant at door thresholds, we can help.
Work in a place like Kilmartin is planned ahead, journey included. Outdoor plot mastic needs dry weather, but indoor floor and skirting joints can be sealed whatever the forecast.
You get a one-year guarantee, the same in Kilmartin as everywhere else we work.
- Where
- Kilmartin (PA31)
- Wider area
- Argyll and Bute
- Cover
- 12 months on all our work
- Quote
- A clear quote up front
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Why act early in Kilmartin
Left open, concrete joints break down under traffic. A sealed joint supports the edges before they need a bigger repair. In a place like Kilmartin, small leaks are easy to put off, but water through a failed joint keeps working away until it’s fixed.
Leaving a failed joint usually makes the job bigger, not smaller. If you’re unsure, send an email to info@mrmastic.co.uk for an honest opinion and a quote.
What you get with us
- Over 20 years’ experience
- Any old sealant cut out fully, not covered over
- An ARBOMaster approved applicator
- Domestic, commercial and hotel work
See our cost guide or our reviews.
Joints and finishes in Kilmartin homes
Timber frame is common in newer Scottish homes, so skirting and sealant joints can open up as the building settles. Across Argyll and Bute, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and each moves in its own way. That is why the skirting and threshold joints need a flexible seal.
In and around Kilmartin, as anywhere, good floor joint sealing starts with a clean, dry, properly prepared joint. Community buildings like Kilmartin Parish Church are part of the picture too: joints in its floors, skirtings and thresholds need resealing as they wear.
Kilmartin is about 30 miles north-west of Greenock, in Argyll and Bute. Our applicators cover floor joint sealing for householders, landlords and businesses in Kilmartin. Kilmartin is one of 118 towns and villages in Argyll and Bute where we work. Our Glasgow page covers work nearby, about 51 miles away.
Our applicators cover all of the PA31 postcode area for floor joint sealing and the streets around it. We also cover the places around Kilmartin: Kilmichael Glassary (4 miles south-east), Ardfern (4 miles north-west), Bridgend (4 miles south), Cairnbaan (5 miles south) and Barravullin (5 miles north). Within a short drive, we also cover Ceann Loch Gilb (7 miles south), Lochgilphead (7 miles south) and Ardrishaig (8 miles south). If you are somewhere remote, the job takes a little more planning, so mention it when you ask for a quote.
What’s near Kilmartin
Other landmarks nearby include Carnasserie Castle (1.2 miles north) and Kilmartin Museum (within half a mile south-west). The countryside around Kilmartin includes Lochan Add and Druim an Achanarnich.
Landlords, agents and businesses in Kilmartin
Hotels need rooms back in use, so we plan the work room by room. Hotel work is part of what we do, alongside homes and businesses.
From a single let to a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a one-year guarantee.
Places near Kilmartin
Also in Kilmartin
What we do, step by step
There isn’t much for you to do on the day. Show us the job and we’ll take it from there. The job generally takes a few hours, depending on the length of joint. For a place like Kilmartin, longer drives are planned in advance. Mention tracks, gates, ferries or anything else about the route.
- We start by checking the floor, the joint and what traffic it takes.
- We remove what’s in the joint now.
- We vacuum out the joint and add backing where the depth needs setting.
- We apply the sealant in a colour that suits the floor.
- The joint is tooled neatly and the cure time explained.
Before we arrive
- For indoor joints, keep the area dry beforehand if you can
- Plan for the work area to be out of bounds to pets and children
- Let us know about earlier repairs to the joints
Getting a quote
For a quote, drop us a line at info@mrmastic.co.uk with the location and a short description of the problem. You will have a clear quote before we start.
Related advice
Common questions in Kilmartin
Is Kilmartin in your area for floor joint sealing?
Yes. Our work covers the whole of Scotland, and Kilmartin is part of that. You can send an email to info@mrmastic.co.uk and let us know what needs doing.
Do you cover smaller places like Kilmartin?
Yes, smaller places are covered as well as towns. We work across all of Scotland. Let us know about access, parking and anything unusual about getting there when you book.
Which products do you use?
Products from Arbo and Everbuild, among others, chosen to suit the joint. We explain the product when we quote.
Is there a guarantee?
Yes. Every job comes with a 12-month guarantee.
Will you leave a mess?
Not at all. The area is protected while we work and cleaned up afterwards.
Can you add a movement joint to a tiled floor?
Often, yes, where it suits the floor. The grout is raked out and replaced with a flexible sealant in a colour to suit so the floor can move.
Will the old sealant be removed?
Yes. All of the old material is cut out and the joint cleaned before applying anything new.
Do you offer different sealant colours?
Usually, yes. White, clear and grey are common, and other colours are available, and we agree the colour with you before work begins.
What we can’t put right
Some problems need a builder, plumber or other trade rather than us:
- Failed waterproofing under a wet room floor
- Cracked or broken concrete slabs
- Large cracks that need a surveyor
If you’re not sure, just drop us a line at info@mrmastic.co.uk and we’ll give you a straight answer before booking.
Joints and surfaces we work on
- Concrete floor joints
- Commercial floors
- Wet room & bathroom floors
- Skirting boards
- Thresholds
- Tiled floors
How we quote for floor joint sealing
Every job gets its own quote. These are the things that affect it:
- Working hours on commercial sites
- How many areas need sealing
- How much there is to do
- Any mould that needs treating
There are no prices on our website, because each job is priced on what it involves. Call for a quick quote.
Helping us quote
What to tell us when you ask for a quote:
- The problem you’ve noticed
- Any previous sealing or DIY work
- A few photos by email, if you can
- Whether it’s a home or a business
Want a quote for floor joint sealing? Please send an email to info@mrmastic.co.uk with a few details. You’ll know what we plan to do, and what it will cost, before any work begins.
Surface by surface
Concrete floor joints
Concrete floors have sawn or formed joints to control cracking. They’re resealed with a product chosen for what runs over them.
Commercial floors
Commercial washrooms and kitchens have floor joints that get wet constantly. We reseal them with a sealant suited to wet areas.
DIY versus a professional finish
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
The biggest DIY mistake is sealing over old sealant. Silicone does not stick to old silicone, so it lifts and traps water and mould underneath. All the old material has to come out first.