Hampshire · England
Floor Joint Sealing in Fox
Floor joint sealing across Fox and nearby, with old sealant always removed completely and a 12-month guarantee.
- Worn sealant at door thresholds
- Open joints around bathroom floor edges
- Cracked grout where a tiled floor needs a movement joint
Floor joint sealing in Fox, done properly
Concrete floors in warehouses and units have joints that take heavy wear. We reseal them with a product chosen for the movement and the traffic. We’re often asked to deal with gaps at thresholds between rooms and cracked caulk along skirting in bathrooms and kitchens, on commercial floors, wet room & bathroom floors and skirting boards.
Older homes in small places like Fox often have timber floors that move with the seasons, so skirting and threshold joints need a flexible sealant rather than a rigid filler.
Whatever the size of the job, it’s backed by our 12-month guarantee.
- Location
- Fox (SP11)
- Region
- Hampshire
- Guarantee
- One year on every job
- Quotes
- A clear quote up front
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Floor joint sealing around Fox
Across Hampshire, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and each moves in its own way. The joint at the skirting or threshold has to allow for that.
If you look after a building such as Amport Church of England Primary School, floor and threshold joints in busy corridors wear quickly and are best resealed early. For buildings such as Church of St Mary, floor and skirting joints in halls and kitchens wear like any others.
Fox is about 5 miles west of Andover, in Hampshire. For floor joint sealing in and around Fox, please ring 0345 464 0079 or send us an email for a quick quote. We cover Hampshire from our Crawley base. Across Hampshire, we cover 683 places, and Fox is one of them. We also work in Southampton, around 21 miles away.
Postcode districts we cover here for floor joint sealing: SP11. Other places close to Fox include Amport (1 mile north-east), Monxton (1 mile north-east), Abbotts Ann (2 miles east), Kentsboro (2 miles south) and Little Ann (3 miles east). Further out, we also cover Winchester (15 miles south-east), Andover (5 miles east), Romsey (14 miles south), Hyde (14 miles south-east), Tidworth (5 miles north-west) and Weeke (14 miles south-east).
Near you in Fox
For rail, the closest station is Grateley station, about 2.1 miles south-west of the centre. Other landmarks nearby include Andover War Memorial Hospital (4.2 miles north-east). Not far away are Mill Lake and Anton Lakes.
Why deal with it now?
An open concrete floor joint gets wider every time something heavy crosses it. Resealing it early protects the edges and keeps the damage down. Where a wall is exposed, as many are in small places like Fox, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
The cost reflects the work involved, not guesswork. That is why we ask a few questions first.
Why Fox customers choose us
- Colour picked to suit the job
- More than 20 years in sealant work
- Tidy, careful work
- White, clear, grey or coloured to suit, where the product allows
Common problems we fix in Fox
Timber floors and skirting shrink and swell through the year. In winter, with the heating on, timber dries and gaps open, then close again in damper months.
Most people get in touch after spotting something like this:
- Open gaps along the bottom of skirting boards
- Cracked grout where a tiled floor needs a movement joint
- Threshold joints that have opened or worn
- Gaps between floors and kitchen plinths
Rented homes near Grateley station change hands often, and a tidy floor and skirting joint helps a rental look ready for the next tenant.
Before booking anyone
- What preparation is included
- Which sealant they’ll use, and why
- Whether VAT is included
- Whether they seal over old material or remove it
Surface by surface
Wet room and bathroom floors
Floor joints in bathrooms take water every day. They’re sealed with a flexible, anti-fungal silicone.
Tiled floors
The edge of a tiled floor, where it meets the wall or skirting, should be a flexible joint. Grout at the edge is removed and replaced with sealant.
Places near Fox
More services for Fox
Fox questions
Will you come out to Fox?
Yes, Fox is covered. Our work covers London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Do you work for landlords with property near Grateley station?
Yes. We work for landlords and agents as well as householders. Just phone 0345 464 0079 or send us an email with the address and what needs doing, and we will give you a clear price.
How much does floor joint sealing cost in Fox?
It depends on the job, so we quote each one individually. For a quick quote, phone 0345 464 0079 or drop us an email and let us know what needs doing and where.
Do you offer different sealant colours?
Yes. White, clear and grey are common, and other colours are available, and we agree the colour with you before we start.
Do you guarantee your work?
Yes, for a year. If anything isn’t right with the work within the year, let us know and we’ll sort it.
Do I have to be there?
That depends on where the joints are. Inside work needs someone to give us access, and for outside work we’ll agree access with you when we book.
Are you ARBOMaster approved?
Yes. We hold ARBOMaster approved applicator status and we are fully insured too.
Can you seal over the old sealant?
No, and we never do. It may look fine at first, but the new layer lifts away from the old one. Removing the old sealant completely is the only lasting way.
The process
When we get to you, we check the joints match what you told us. If anything is different, we explain it before carrying on. Most jobs then take a few hours, depending on the length of joint. For a village or hamlet like Fox, the journey is planned in advance: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- First we check the joint and the floor and agree which sealant suits it.
- Whatever is in the joint now, whether caulk, grout or sealant, comes out.
- The joint is vacuumed clean, with backing fitted wherever depth matters.
- We apply a flexible sealant, or a floor-joint product on concrete, in a suitable colour.
- The joint is tooled to a neat finish and we tell you when it can take feet and a mop.
How to prepare
- Tell us about access, such as stairs, a lift or high-level joints
- Where the joints are inside, avoid wetting them before we arrive
- Plan for the work area to be out of bounds to pets and children
Get a quote
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and add pictures by email if you can.
Read more
When it is not the sealant
We will not take on work that won’t last, so here’s what sealant can’t put right:
- Failed waterproofing under a wet room floor
- Floors that are uneven or need levelling
- Structural movement or subsidence
If you’re not sure, just phone 0345 464 0079 or send us an email and we will give you a straight answer before booking.
Joints and surfaces we work on
- Wet room & bathroom floors
- Concrete floor joints
- Tiled floors
- Commercial floors
- Thresholds
- Skirting boards
DIY versus a professional finish
If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it does not work out, we can still put it right.
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, then guaranteed for a year.
How we quote for floor joint sealing
Every job gets its own quote. These are the things that affect it:
- The product the joint needs
- Any working-time requirements on site
- How many rooms, windows or areas are involved
- The old material and how stubborn it is
Doing several joints on one visit generally makes better use of the time than several visits, so tell us about everything that needs sealing. You’ll get one clear quote for the whole job.
What to tell us for a quote
There’s no need for technical detail. It helps if you can tell us:
- How we’d reach the joints
- Where the job is, and your postcode
- Roughly how big the job is
- Pictures of the joints, sent by email
For a quick quote, get us on the phone, or email us if that’s easier. Tell us about the joints that need doing and we’ll explain what’s involved.