Hampshire · England
Firgo Floor Joint Sealing
Sealing skirting-to-floor joints, tiled floor movement joints and concrete floor joints for householders, landlords and businesses in Firgo. ARBOMaster approved applicators, fully insured, with a one-year guarantee.
- Open joints around bathroom floor edges
- Concrete floor joints that have broken down
- Rigid edge joints in tiled floors
Floor joint sealing in Firgo, done properly
A threshold joint has to cope with feet, movement and sometimes water. We use a flexible product that suits both floors in a colour to suit. If you’re dealing with failed joint filler in concrete floors and grout used at the floor edge instead of sealant, we can put it right.
Work in a small place like Firgo just needs the journey and access planning, and once on site, the job is the same as anywhere.
All our work comes with a one-year guarantee.
- Location
- Firgo (RG28)
- Region
- Hampshire
- Guarantee
- A year, on every job
- Quotes
- A clear price before any work starts
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
Can I do it myself?
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
The biggest DIY mistake is sealing over old sealant. New silicone won’t bond to old, so it lifts and traps water and mould underneath. Everything old must be removed first.
Signs you need floor joint sealing in Firgo
Decorators’ caulk is often used along skirting because it’s cheap and paintable. It cracks where there’s movement or water, which is why so many skirting joints look broken.
Most people get in touch when they notice one of these:
- Floor edges that trap water and grime
- Caulk that has cracked where the floor moves
- Perimeter joints in tiled floors filled with grout
- Concrete floor joints that have broken down
If you look after a church, hall or community building such as Church of St Mary, joints in its floors, skirtings and thresholds need resealing as they wear.
What to look for in a quote
- Are they insured?
- Whether all the old sealant comes out first
- Who does the work, and how experienced they are
- How long to leave it before use
What happens if it’s left?
Water that gets past a floor joint can damage the floor beneath. Sealing them now keeps the problem at the surface. Around Firgo, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
What it costs depends on the size of the job, how much old material has to come out and access to the work. You’ll have a clear quote before any work starts, so you know where you stand.
Why us?
- Full insurance on every job
- Homes, businesses and hotels
- White, clear, grey or another colour, product permitting
- Anti-fungal sanitary silicone in wet areas
See our cost guide or customer reviews.
What the job involves on each surface
Tiled floors
The edge of a tiled floor, where it meets the wall or skirting, should be a flexible joint. We rake out any grout there and reseal.
Concrete floor joints
Concrete floors have sawn or formed joints to control cracking. They’re resealed with a product chosen for what runs over them.
Joints and finishes in Firgo homes
Across Hampshire, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and they do not all move the same way. That is why the skirting and threshold joints need a flexible seal.
Managing a site like Testbourne Community School? Then entrance and corridor floor joints take a lot of traffic. For landlords with property near Whitchurch (Hampshire) station, open skirting and floor joints collect dirt and water, so seal them while the property is empty.
Firgo is about 6 miles east of Andover, in Hampshire. Every kind of property in Firgo can book us for floor joint sealing, old or new, large or small. Every job comes with our one-year guarantee. Firgo is one of 683 towns and villages in Hampshire where we work for floor joint sealing. Our Southampton page covers work nearby (20 miles or so).
Here we cover the RG28 postcode area for floor joint sealing. If you are just outside Firgo, we cover Hurstbourne Priors (2 miles north-west), Whitchurch (2 miles north), Wells-in-the-Field (2 miles north-east), Freefolk (3 miles north-east) and Cole Henley (4 miles north). We also work in nearby towns such as Basingstoke (11 miles north-east), Winchester (10 miles south), Andover (6 miles west), Chandler's Ford (15 miles south), Tadley (13 miles north-east) and Hyde (9 miles south).
Landmarks near Firgo
The nearest railway station is Whitchurch (Hampshire) station, about 2.4 miles north.
The process
At the end, we look at the finished work together and explain the cure time. The work normally takes a few hours, depending on the length of joint, depending on the size of the job. In a small place like Firgo, access is normally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- We start by checking the floor, the joint and what traffic it takes.
- We remove what’s in the joint now.
- The joint is vacuumed clean and backing fitted where needed.
- The chosen sealant goes in, coloured to suit the floor.
- We tool it neatly and tell you when it can be walked on and cleaned.
How to prepare
- Tell us about any previous sealing or DIY attempts
- Tell us about any water getting in
- Where the joints are inside, avoid wetting them before we arrive
How to get a quote
For floor joint sealing in Firgo, ring 0345 464 0079 or drop us an email. Tell us what the problem is and where, and we will agree the price before any work begins.
Read more
Places near Firgo
Also in Firgo
Aftercare tips
Looking after new joints is easy:
- Have a cracking tiled floor checked before tiles break
- Keep heavy wheels off new concrete joints until cured
- Sweep along the edges of the floor
- Look at floor joints each spring
Follow the cure time before walking on or cleaning the joint. Feet are usually fine before mopping or wheeled traffic, and we’ll tell you both.
Small gaps are quick to seal. Ignored, they fill with dirt and open further and are harder to clean out.
What affects the quote in Firgo
We do not publish a price list. What we look at:
- When we can work, for business premises
- Access and height
- The number of rooms or windows
- Whether old sealant or filler has to be cut out
We do not show prices on the website, because each job is priced on what it involves. Call for a quick quote and we will talk you through it.
Helping us quote
To help us quote quickly, let us know:
- How we’d reach the joints
- Photos by email, if that is easy
- Where the job is, and your postcode
- Whether it has been sealed before
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is, and add pictures by email if you can.
FAQs for Firgo
Is Firgo in your area for floor joint sealing?
Yes, Firgo is within the area we cover. We work across London and the South East. Just call 0345 464 0079 or drop us an email with a few details of the job, and we will send you a clear quote.
Can you help a landlord with a rental near Whitchurch (Hampshire) station?
Yes, we work for letting agents and landlords. Just phone 0345 464 0079 or drop us an email and tell us about the property, and we’ll send you a clear quote.
Is there any odour?
Possibly a little. It fades as the sealant cures, and ventilation helps.
Do you offer different sealant colours?
We’ll suggest a colour to suit the surroundings. The choice depends on the product the joint needs.
Do I need to be at home?
We need access to the joints, so we will agree that with you when we book. For inside work, that normally means someone being in.
Can you do several jobs on one visit?
Yes. Tell us about everything you’d like done and you will get one quote.
How long does the job take?
A typical job takes a morning or an afternoon for most homes, including preparation and clearing up. We’ll confirm how long when we quote.
Which products do you use?
Products from Arbo and Everbuild, among others, picked for each joint. We’ll tell you what we’re using and why.